1 / 6

Almen Strips

Almen Strips. Three Thicknesses to Choose N – A - C. Almen Strips. Relationship of arc height response according to thickness of the strip N strip is .031” A strip is .051” C strip is .094”. Almen Strips. The “A” strip is the most commonly used strip.

Albert_Lan
Download Presentation

Almen Strips

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Almen Strips Three Thicknesses to Choose N – A - C

  2. Almen Strips • Relationship of arc height response according to thickness of the strip • N strip is .031” • A strip is .051” • C strip is .094” Presented by The Shot Peener www.shotpeener.com

  3. Almen Strips • The “A” strip is the most commonly used strip. • For higher intensity peening use the “C” strip. It is thicker and does not bend as readily as the “A” strip. • For lower intensity peening use the “N” strip. It is thinner and bends easier than the “A” strip. Presented by The Shot Peener www.shotpeener.com

  4. 28 “C” strip for very high intensity .028A = .008C “N” strip for very low intensity .024N = .008A Presented by The Shot Peener www.shotpeener.com

  5. Intensity Range • For peening intensity above .024” A use the “C” strip. • For peening intensity below .004” A use the “N” strip. Presented by The Shot Peener www.shotpeener.com

  6. For more information • Visit our web site www.shotpeener.com Presented by The Shot Peener www.shotpeener.com

More Related