1 / 4

Network Security FAQ Virtual Private Networks

Network Security FAQ Virtual Private Networks

Download Presentation

Network Security FAQ Virtual Private Networks

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. www.ConfigRouter.com Network​​Security​​FAQ:​​Virtual​​Private​​Networks Q1.​​Name​​three​​types​​of​​VPN​​solutions. Answer:​​Three​​types​​of​​VPN​​solutions​​include​​remote​​access,​​site-to-site,​​and​​firewall-based. http://www.configrouter.com/network-security-faq-virtual-private-networks-7479/ Q2.​​What​​are​​the​​four​​major​​functions​​of​​IPSec? Answer:​​The​​four​​major​​functions​​of​​IPSec​​are​​confidentiality,​​data​​integrity,​​origin authentication,​​and​​antireplay​​protection. http://www.configrouter.com/network-security-faq-virtual-private-networks-7479/ Q3.​​Describe​​the​​two​​HMAC​​algorithms​​that​​are​​commonly​​used​​today​​to​​provide​​data​​integrity. Answer:​​The​​two​​HMAC​​algorithms​​that​​are​​commonly​​used​​today​​to​​provide​​data​​integrity​​are as​​follows: HMAC-MD5​​This​​protocol​​uses​​a​​128-bit​​shared​​key.​​The​​key​​and​​the​​message​​combine​​to form​​a​​128-bit​​hash. HMAC-SHA-1​​This​​protocol​​uses​​a​​160-bit​​shared​​key.​​The​​length​​of​​the​​hash​​is​​160​​bits,​​so this​​protocol​​is​​considered​​stronger​​because​​of​​the​​longer​​key. http://www.configrouter.com/network-security-faq-virtual-private-networks-7479/ Q4.​​What​​are​​the​​three​​peer​​authentication​​methods​​used​​in​​IPSec? Answer:​​Three​​peer​​authentication​​methods​​used​​in​​IPSec​​are​​as​​follows: Preshared​​keys​​A​​secret​​key​​is​​entered​​into​​each​​peer​​manually. RSA​​signatures​​This​​uses​​the​​exchange​​of​​digital​​certificates​​to​​authenticate​​the​​peers. RSA​​encryption​​nonces​​Nonces​​(a​​random​​number​​generated​​by​​the​​peers)​​are​​encrypted​​and then​​exchanged​​between​​peers.​​The​​two​​nonces​​are​​used​​during​​the​​peer​​authentication process. http://www.configrouter.com/network-security-faq-virtual-private-networks-7479/ https://configrouternotes.blogspot.in  https://configrouter.tumblr.com/  https://in.pinterest.com/phaniconfig/ccna-online-training/  https://configrouternotes.wordpress.com/  https://twitter.com/PhaniConfig  https://trello.com/configrouter 

  2. www.ConfigRouter.com http://flip.it/y5znjX  https://www.reddit.com/user/phani_config/  https://www.scoop.it/t/ccna-exam-answers  http://feeds.feedburner.com/ConfigRouter    CCNA​ ​200-125​ ​Dump​ ​With​ ​Questions​ ​​ ​and​ ​Answers​ ​with​ ​Explanation  CCNA​ ​NetAcad​ ​Training  CCNA​ ​RS​ ​Training  CCNA​ ​Cyber​ ​Ops​ ​Training  CCNA​ ​Data​ ​Center​ ​Training  CCNA​ ​Security​ ​Training https://www.youtube.com/c/CiscoNetworkingVideos Nexus​​OS​​Basics​​and​​Fundamentals​​Complete​​Video​​Course https://www.youtube.com/watch?v=pwn0sT4pOEo&list=PL9UP_4zHScPw49YXOCkK9UFRbPP S55RD2 CCNA​​Cyber​​Ops​​SECFND​​210-250​​Complete​​Video​​Course https://www.youtube.com/watch?v=eT88kco4u5M&list=PL9UP_4zHScPxTqWXRTbTHOUZ4IH BfItpZ CCNA​​Wireless​​200-355​​Complete​​Video​​Course https://www.youtube.com/watch?v=yNnGavnlTZ0&list=PL9UP_4zHScPweZMvKm2mhucuF0X- kO5jV CCNA​​Cloud​​CLDADM​​210-455​​Complete​​Video​​Course https://www.youtube.com/watch?v=GjD27VyOYEQ&list=PL9UP_4zHScPz35gaincmzptwnH1cB M8Oj CCNA​​Data​​Center​​DCICT​​200-155​​Complete​​Video​​Course https://www.youtube.com/watch?v=QMe8ZgviyZ4&list=PL9UP_4zHScPwrrIVgNHW8c2weI-pIgF DL CCNA​​Data​​Center​​DCICN​​200-150​​Complete​​Video​​Course https://www.youtube.com/watch?v=VAJv3C4BgjE&list=PL9UP_4zHScPyjupWBcyODSaJjlR7Se Ik- CCNA​​Cloud​​CLDFND​​200-451​​Complete​​Video​​Course https://www.youtube.com/watch?v=C3SdnXLAA7M&list=PL9UP_4zHScPy8PX3z55iFF0rW66n- 1PDf

  3. www.ConfigRouter.com Q5.​​There​​are​​two​​main​​IPSec​​framework​​protocols​​available.​​State​​their​​names​​and​​give​​a​​brief explanation​​of​​what​​they​​do. Answer:​​The​​two​​main​​IPSec​​framework​​protocols​​are​​as​​follows: AH​​AH​​is​​the​​protocol​​to​​use​​when​​confidentiality​​is​​not​​required.​​It​​provides​​data​​authentication and​​integrity​​for​​IP​​packets​​between​​two​​systems.​​It​​verifies​​that​​the​​origin​​of​​the​​packet​​is correct​​and​​that​​the​​packet​​is​​not​​modified​​during​​transport.​​It​​does​​not​​encrypt​​the​​data​​packet. All​​text​​is​​transported​​in​​clear​​text. ESP​​This​​protocol​​can​​be​​used​​to​​provide​​encryption​​and​​authentication.​​It​​provides confidentiality​​by​​performing​​encryption​​at​​the​​IP​​packet​​layer.​​ESP​​provides​​authentication​​for the​​IP​​packet​​and​​the​​ESP​​header.​​As​​with​​AH,​​ESP​​verifies​​three​​things:​​that​​the​​packet originated​​from​​where​​it​​declares​​it​​did,​​that​​the​​packet​​is​​what​​it​​says​​it​​is,​​and​​that​​the​​packet has​​not​​been​​modified​​during​​transport. http://www.configrouter.com/network-security-faq-virtual-private-networks-7479/ Q6.​​Both​​ESP​​and​​AH​​can​​be​​applied​​to​​IP​​packets​​in​​two​​different​​ways.​​List​​those​​two​​modes and​​explain​​the​​difference​​between​​them. Answer:​​The​​two​​modes​​are​​as​​follows: Transport​​mode​​This​​mode​​is​​primarily​​used​​for​​end-to-end​​connections​​between​​hosts​​or devices​​acting​​as​​hosts.​​Transport​​mode​​protects​​the​​payload​​of​​the​​packet​​but​​leaves​​the original​​IP​​address​​readable.​​This​​address​​is​​used​​to​​route​​packets​​through​​the​​Internet. Transport​​mode​​provides​​security​​to​​the​​higher​​layer​​protocols​​only. Tunnel​​mode​​This​​mode​​is​​used​​between​​gateways​​such​​as​​routers,​​PIX​​Firewalls,​​or​​VPN concentrators.​​Tunnel​​mode​​is​​used​​when​​the​​final​​destination​​is​​not​​a​​host​​but​​a​​VPN​​gateway. In​​this​​mode,​​instead​​of​​shifting​​the​​original​​IP​​header​​to​​the​​left​​and​​then​​inserting​​the​​IPSec header,​​the​​original​​header​​is​​copied​​and​​shifted​​to​​the​​left​​to​​form​​a​​new​​IP​​header.​​The​​IPSec header​​is​​then​​placed​​between​​the​​new​​and​​the​​original​​IP​​headers.​​The​​original​​datagram​​is​​left intact. http://www.configrouter.com/network-security-faq-virtual-private-networks-7479/ Q7.​​List​​the​​functions​​for​​which​​IKE​​Phase​​1​​is​​responsible. Answer:​​IKE​​Phase​​1​​is​​responsible​​for​​the​​following​​functions: Authenticating​​the​​IPSec​​peers Negotiating​​an​​IKE​​security​​association​​between​​the​​peers Initiating​​a​​secure​​tunnel​​for​​IPSec​​using​​the​​Internet​​Security​​Association​​and​​Key Management​​Protocol​​(ISAKMP) http://www.configrouter.com/network-security-faq-virtual-private-networks-7479/

  4. www.ConfigRouter.com Q8.​​List​​the​​functions​​for​​which​​IKE​​Phase​​2​​is​​responsible. Answer:​​IKE​​Phase​​2​​is​​responsible​​for​​the​​following​​functions: Negotiating​​the​​set​​of​​security​​parameters​​for​​the​​tunnel Creating​​the​​IPSec​​tunnel http://www.configrouter.com/network-security-faq-virtual-private-networks-7479/ Q9.​​What​​steps​​should​​be​​completed​​before​​configuring​​a​​device​​to​​use​​IPSec? Answer:​​Before​​configuring​​a​​device​​to​​use​​IPSec,​​you​​should​​complete​​the​​following​​steps: Step​​1.​​Establish​​an​​IKE​​policy​​This​​policy​​must​​be​​identical​​on​​both​​sides​​of​​the​​VPN. Step​​2.​​Establish​​an​​IPSec​​policy​​Only​​certain​​traffic​​has​​to​​go​​through​​the​​IPSec​​tunnel.​​Of course,​​you​​can​​decide​​to​​send​​all​​traffic​​between​​peers​​through​​that​​tunnel,​​but​​there​​is​​a significant​​performance​​penalty​​when​​using​​IPSec.​​It​​is​​better​​to​​be​​selective.​​As​​in​​step​​1,​​both peers​​need​​to​​have​​the​​same​​IPSec​​policies. Step​​3.​​Examine​​the​​existing​​configuration​​Check​​your​​devices​​to​​avoid​​conflicts​​with​​existing settings​​on​​one​​of​​the​​devices. Step​​4.​​Test​​the​​network​​before​​IPSec​​Check​​whether​​you​​can​​ping​​the​​peers​​that​​are​​going​​to participate​​in​​IPSec.​​If​​you​​cannot​​ping​​them,​​you​​must​​fix​​this​​before​​you​​can​​configure​​IPSec. Step​​5.​​Permit​​IPSec​​ports​​and​​protocols​​If​​there​​are​​access​​lists​​enabled​​on​​the​​devices​​along the​​path​​of​​the​​VPN,​​make​​sure​​that​​those​​devices​​permit​​the​​IPSec​​traffic. http://www.configrouter.com/network-security-faq-virtual-private-networks-7479/ Q10.​​Describe​​briefly​​how​​the​​IPSec​​process​​works. Answer:​​The​​following​​steps​​outline​​how​​an​​IPSec​​process​​works: Step​​1.​​Interesting​​traffic​​initiates​​the​​setup​​of​​an​​IPSec​​tunnel. Step​​2.​​IKE​​Phase​​1​​authenticates​​peers​​and​​establishes​​a​​secure​​tunnel​​for​​IPSec​​negotiation. Step​​3.​​IKE​​Phase​​2​​completes​​the​​IPSec​​negotiation​​and​​establishes​​the​​tunnel. Step​​4.​​Secure​​VPN​​communication​​can​​occur. Step​​5.​​When​​there​​is​​no​​traffic​​to​​use​​IPSec,​​the​​tunnel​​is​​torn​​down,​​either​​explicitly​​or because​​the​​SA​​timed​​out. http://www.configrouter.com/network-security-faq-virtual-private-networks-7479/

More Related