1 / 16

ABB

"The Type-550X is an electronic pressure regulator that converts a variable signal (current or voltage) to a proportional pneumatic output. Its compact housing, accessible ports and easy adjustments provide an ideal answer to applications that are space-constrained.<br>This economical instrument provides precision air pressure regulation to actuators, valves, positioners and other final control elements. An integral volume booster provides high flow capacity, increasing control speed in critical applications. Multiple choices for wiring and porting simplify installation and decrease the time required to do so. In addition to standard wall, panel or pipe mounting, optional DIN rail and manifold mounting kits are available. <br>The ControlAir Type-925 Multifunction Manifold provides a common supply port and individual shutoff valves for sets of 3, 5, 10 or 15 units."<br>

Instronline
Download Presentation

ABB

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Data Sheet 10/18-0.10-EN Rev. C TEIP11-PS I/P signal converter for standard signals Measurement made easy Proven and reliable concept Compact design —Small dimensions, low weight Sturdy construction and solid functionality —Influence of shock and vibration < 1% at 10 g Variety of signal ranges —Input, e.g., 0 ... 20 mA or 4 ... 20 mA —Output 0.2 ... 1 bar (3 ... 15 psi) Complies with the following directives —EMC Directive 89/336/EEC as of May 1989 —CE mark meets the EC directive for the CE certificate of conformity Change from one to two columns Additional temperature range — From -40 (optional -55) ... 85 °C (-40 (optional -67) ... 185 °F) Ex protection approvals —ATEX, FM/CSA, GOST for intrinsically safe and Explosion proof operation Several different designs —IP 20 control room housing unit for rail mounting —IP 20 control room housing unit for block mounting —IP 54 plastic field housing unit —IP 65 aluminum or stainless steel housing unit Single module —For OEM application (upon request)

  2. TEIP11-PS I/P signal converter for standard signals Concept The housing units are available in a variety of models to meet your installation requirements. For potentially explosive conditions, units that offer intrinsically safe operation or pressure-resistant encapsulation are available with international approval certificates for use worldwide. Various ranges can be supplied on the input side and the output side for signal conversion (see information in chapter Technical Data, page 3) A power supply of only 1.4 bar (20 psi) of compressed air is required. The TEIP11-PS signal converter converts electrical standard signals, e.g. 4 … 20 mA to 0.2 … 1 bar (3 ... 15 psi). It is therefore a connecting link between electrical/electronic and pneumatic systems. The signal conversion process is similar to the patented force balance method. Special features of the TEIP11-PS signal converter are its relatively small dimensions and outstanding operational stability when subject to shock and vibration. The converter can be subjected to loads up to 10 g with less than 1% effect on function. Change from two to one column Change from one to two columns Designs Field housing The field housing unit is designed for installation onsite or in the field. Housing units are available in the following models (and protection classes): plastic (IP 54), aluminum (IP 65) and stainless steel (IP 65). The housing units are suitable for wall mounting and 2" pipe mounting. A specially designed signal converter in a plastic housing unit enables the use of combustible gas as a power supply instead of the standard compressed air. Control room housing unit for rail mounting The control room housing unit for rail mounting is the most user-friendly and lowest priced model in the signal converter line. A mounting base that is compatible with all commercially available EN rails is used for installation. The housing unit with plastic cap has an IP 20 protection class. Control room housing unit for block mounting The control room housing unit for block mounting enables you to install a number of converters in a small space. This design features central air supply via connection block and stop valves in the air connectors of the integrated signal converter. A maximum of 4 signal converters can be fitted on the connection blocks required for block mounting. If necessary, 2 or 3 (or max. 4) connection blocks can be connected to each other to create block units of 4-8-12-16 signal converters. Stop valves allow you to mount or remove individual converters during operation. Fig. 1 1 Control room housing unit for rail mounting 2 Control room housing unit for block mounting 3 Plastic field housing unit 4 Aluminum or stainless steel field housing unit 2 10/18-0.10-EN Rev. C | TEIP11-PS

  3. Technical Data Transmission data and influences Characteristic curve Linear, direct, or reverse action Deviation ≤ 0.5 % Hysteresis ≤ 0.3 % Dead band ≤ 0.1 % Temperature ≤ 1 % / 10 K within -20 ... 85 °C (-4 ... 185 °F) ≤ 2 % / 10 K within -55 ... -20 °C (-67 ... -4 °F) Power supply ≤ 0.3 % / 0.1 bar (1.5 psi) change in pressure Mechanical vibration ≤ 1 % up to 10 g and 20 ... 80 Hz Seismic vibration Meets the requirements of DIN IEC 68-3-3 Class III for strong and strongest earthquakes. Mounting orientation Zero point ≤ 0.4 % at 90° change of position Step response 10 ... 90 % and 90 ... 10 % 0.6 s 5 ... 15 % and 15 ... 5 % 0.25 s 45 ... 55 % and 55 ... 45 % 0.2 s 85 ... 95 % and 95 ... 85 % 0.15 s EMC Meets the requirements of EMC Directive 89/336/EEC of May 1989 (increased interference immunity as per EN 50082-2 PR of 11/93). CE marking Complies with the EC directive for CE conformity Input (electric) Signal range 0 ... 20 mA or 4 ... 20 mA 0 ... 10 mA or 10 ... 20 mA 4 ... 12 mA or 12 ... 20 mA (additional ranges available upon request) Input resistance Ri = 260 Ω at 20 °C (68 °F), Tk + 0.4 %/K Overload limit 30 mA (for explosion-proof devices, see the information in chapter "Ex relevant specifications" on page 6) Capacitance/inductance Negligible Output (pneumatic) Signal range 0.2 ... 1 bar (3 ... 15 psi) Air capacity ≥ 5 kg/h = 4.1 Nm3/h = 2.4 scfm Load power acc. to VDE / VDI 3520 ≥ 0.95 kg/h = 0.9 Nm3/h = 0.5 scfm Power supply (pneumatic) Instrument air Free of oil, water, and dust acc. to DIN/ISO 8573-1 Pollution and oil content according to Class 3 Pressure dew point 10 K below operating temperature Supply pressure 1.4 ± 0.1 bar (20 ± 1.5 psi) (for output 1 bar (15 psi)) Air consumption ≤ 0.2 kg/h = 0.16 Nm3/h = 0.1 scfm TEIP11-PS | 10/18-0.10-EN Rev. C 3

  4. TEIP11-PS I/P signal converter for standard signals Operating conditions at installation site Ambient temperature Depending on the ordered model: -40 … 85 °C (-40 ... 185 °F) -55 … 85 °C (-67 ... 185 °F) For Ex d: -40 … 85 °C (-40 ... 185 °F) Required protection IP 20 for control room housing unit for rail or block mounting, IP 54 for plastic housing unit, IP 65 for aluminum or stainless steel field housing unit Mounting position Any Environmental capabilities Climate class GPF or FPF acc. to DIN 40040 Temperature: -55 … 85 °C (-67 ... 185 °F) -45 … 85 °C (-49 ... 185 °F) Relative humidity for operation, storage, or transport: 75 % average, 95 % short-term, no condensation Design for rail mounting Material / Degree of protection IP 20 aluminum housing unit, with plastic cover Assembly Rail mounting: EN 50022 - 35 x 7.5 EN 50035 - G 32 EN 50045 - 15 x 5 Electrical connection 2-pole screw terminal for 2.5 mm2 (14 AWG) Pneumatic connection 1/8 NPT tap hole for air supply and output Weight 0.25 kg (0.55 lb) Dimensions See chapter "Dimensions". Design for block mounting Material/protection class IP 20 aluminum housing unit, with plastic cover Assembly In block format with special connection block (accessory), max. 4 connection blocks each with 4 signal converters Electrical connection 2-pole screw terminal for 2.5 mm2 (14 AWG) Pneumatic connection 3/8 NPT tap hole for air supply (main connection to connection block) 1/8 NPT tap hole for output (on each individual signal converter) Mounting position Any Weight 0.3 kg (0.66 lb) Dimensions See chapter "Dimensions". 4 10/18-0.10-EN Rev. C | TEIP11-PS

  5. Design for field housing unit (plastic) Material / Degree of protection Polyester housing unit, black, IP 54 Assembly Wall or 2" pipe mounting (2" pipe mounting for vertical pipes only) Electrical connection 2-pole screw terminal for 2.5 mm2 (14 AWG) in housing unit, Pg 11 cable gland for cable entry Pneumatic connection 1/8 NPT tap hole for air supply and output Air outlet For gas exhaust with 6 mm (0.24 inch) cut or crimp connection Mounting position Any Weight 1.0 kg (2.20 lb) Dimensions See chapter "Dimensions". Design for field housing unit (aluminum/stainless steel) Material / Degree of protection IP 65 aluminum or stainless steel housing unit Surface Aluminum housing, painted with dual component coating, lower section, black, RAL 9005, screw-on cover, Pantone 420, stainless steel housing unit, electrolytically polished Assembly Wall or 2" pipe mounting With stainless steel mounting bracket (accessory) Electrical connection 2-pole screw terminal for 2.5 mm2 (14 AWG) in housing unit, NPT 1/2" cable gland for cable entry For ATEX "intrinsically safe": M20 x 1.5 tap hole for cable entry For ATEX "Ex d": (Cable gland with Ex d approval available as an accessory on request) NPT 1/2" tap hole for cable entry with FM/CSA Pneumatic connection 1/4" NPT tap hole for air supply and output Weight 0.62 kg (1.37 lb) with aluminum housing unit 1.20 kg (2.65 lb) with stainless steel housing unit Dimensions See chapter "Dimensions". Accessories "Ex d" cable gland Brass, with M20 x 1.5 thread Stainless steel mounting bracket for wall mounting or 2"-pipe mounting For aluminum or stainless steel field housing unit Material for block mounting Connection block for 4 signal converters, panel with 3/8 NPT central air connector, dummy panel TEIP11-PS | 10/18-0.10-EN Rev. C 5

  6. TEIP11-PS I/P signal converter for standard signals Ex relevant specifications Operation as intrinsically safe equipment Labelling Certificate of conformity Type ATEX/GOST Flameproof enclosure Labelling Certificate of conformity Type Device class Standards II 2G Ex ia IIC T6 resp. T4 Gb TÜV 99 ATEX 1487 X TEIP11, Doc. 901068-SMDxxxx TEIP11-PS, Doc. 901068-SMDxxxx TEIP11-PS, Doc. 901069-SMDxxxx II 2G EN 60079-0:2009 EN 60079-11:2012 II 2 G Ex d IIC T4/T5/T6 Gb DMT 02 ATEX E 121 X DOC. 900771 II 2G EN 60079-0: 2012 (General requirements) EN 60079-1: 2007 (Flameproof enclosure "d") Device class Standards Temperature classes for the following versions: TEIP11 Doc. 901068-SMD and TEIP11-PS Doc. 901068-SMD and TEIP11-PS Doc. 901069-SMD Temperature class Input current ≤ 50 mA Electrical data Current < 10 bar < 1 bar Pneumatic data Supply pressure Output signal Ambient temperature range -55 ... 60 °C -55 ... 85 °C -55 ... 40 °C T4 T4 T6 120 mA 100 mA 60 mA Pneumatic data TEIP11-PS Supply pressure Output signal < 2.5 bar < 2 bar TEIP11 Doc. 901068 and TEIP11-PS Doc. 901069 and TEIP11-PS Doc. 901069 Temperature class Input current T4: -40 °C < Tamb < 85 °C T5: -40 °C < Tamb < 70 °C T6: -40 °C < Tamb < 55 °C Thermal data Ambient temperature range -55 ... 60 °C -55 ... 55 °C -55 ... 70 °C -55 ... 85 °C -55 ... 55 °C -55 ... 85 °C -55 ... 45 °C -55 ... 80 °C -55 ... 70 °C Special Requirements The I/P converter is suitable for use in an ambient temperature range of -40 °C to max. 85 °C. If the I/P converter is used at an ambient temperature above 60 °C or below -20 °C, use cable entries and cables suitable for a service temperature corresponding to the maximum ambient temperature increased by 10 K or corresponding to the minimum ambient temperature. Versions with an intrinsically safe control head may no longer be used as "intrinsically safe" if they have been previously used as a flameproof type of ignition protection with a non- intrinsically-safe power supply. T6 T6 T5 T4 T5 T4 T5 T4 T4 50 mA 60 mA 60 mA 60 mA 100 mA 100 mA 120 mA 120 mA 150 mA 6 10/18-0.10-EN Rev. C | TEIP11-PS

  7. Explosion protection ratings Li 50 mA 60 mA 100 mA 120 mA 150 mA Special Requirements The I/P converter TEIP11-PS Doc. type 901069 or Doc. 901069-SMD must be set up outdoors as a pneumatic power supply when used with combustible gases. The supplied gas must be kept sufficiently free of air and oxygen to prevent a potentially explosive atmosphere from forming. The gas must always be routed to the outside. FM/CSA Intrinsically safe FM FM "intrinsically safe" (not for metal field housing units) I.S.: CL I/Div 1/Grp A B C D FM "intrinsically safe" (only for metal field housing units) I.S.: CL I-II-II/Div 1/Grp A B C D E F G S.: CL II/Div 2/Grp G S.: CL III/Div 2 Non-incendive FM N.I.: CL I/Div 2/Grp A B C D (not for metal field housing units) N.I.: CL I/Div 2/Grp A B C (only for metal field housing units) Intrinsically safe CSA CSA "intrinsically safe" (not for metal field housing units) I.S.: CL I/Div 1/Grp A B C D CL I / Div 2 / Grp A B C D CSA "intrinsically safe" (only for metal field housing units) I.S.: CL I/Div 1/Grp A B C D CL II / Div 1 / Grp E F G CL III CL I / Div 2 / Grp A B C D CL II / Div 2 / Grp E F G Non-incendive CSA FM "explosion proof" (only for metal field housing units) X.P.: CL I/Div 1/Grp B C D D.I.P.: CL II III/Div 2/Grp E F G CSA "explosion proof" (only for metal field housing units) X.P.: CL I/Div 1/Grp B C D Ui 42.5 V 38.8 V 30 V 28 V 25.5 V Pi 2.125 W 2.328 W 3.0 W 3.36 W 3.825 W Change from two to one column TEIP11-PS | 10/18-0.10-EN Rev. C 7

  8. TEIP11-PS I/P signal converter for standard signals Dimensions Design for control room housing unit for rail mounting Fig. 2: 1 Electrical connections 2 Filter 3 Output 4 Air supply 5 Mounting element for DIN rail mounting Sensor side, dimensions in mm (inch) 8 10/18-0.10-EN Rev. C | TEIP11-PS

  9. Design for control room housing unit for block mounting Fig. 3: 1 Output 2 Air supply 3 Filter 4 Electrical connections 5 Panel with central air supply connection 6 Connection blocks 7 Dummy panel 1) 0.2 ... 1 bar (2.90 ... 14.50 psi) version 2) 0.4 ... 1 bar (5.80 ... 14.50 psi) version 3) Length 80 mm (3.15 inch) for each connection block Dimensions in mm (inches) TEIP11-PS | 10/18-0.10-EN Rev. C 9

  10. TEIP11-PS I/P signal converter for standard signals Design for plastic field housing unit Fig. 4: 1 Electrical connections 2 Connection only with version for operation with combustible gas for diverting the escaping gas/6 mm (0.24) screw crimp connection 3 Air supply 4 Output 5 Cable gland Dimensions in mm (inches) 10 10/18-0.10-EN Rev. C | TEIP11-PS

  11. Design for aluminum or stainless steel field housing unit Fig. 5: 1 Ground terminal 2 Electrical connections 3 Output 4 Air supply 5 Filter 6 Profiled sheet for wall mounting 7 Cable gland Dimensions in mm (inches) TEIP11-PS | 10/18-0.10-EN Rev. C 11

  12. TEIP11-PS I/P signal converter for standard signals Ordering information Main ordering information TEIP11-PS Base model TEIP11-PS I/P Converter, signal converter for standard signals, with power stage Explosion Protection Without explosion protection ATEX II 2 G Ex ia IIC T6 resp. T4 Gb ATEX II 2 G Ex d IIC T4/T5/T6 Gb FM / CSA Intrinsically Safe FM / CSA Intrinsically Safe and Explosion-proof GOST Russia - Ex ia GOST Russia - Ex d Design Control room housing IP 20, for rail mounting Control room housing IP 20, for block mounting Field housing polyester, IP 54 Field housing aluminium, IP 65 Field housing stainless steel, IP 65 Input Signal Input signal 0 ... 20 mA Input signal 4 ... 20 mA Airtight closed function 4 ... 20 mA Other input signal Output Signal Output signal 0.2 ... 1 bar Output signal 3 ... 15 psi Other output signal Characteristic Direct action Reverse action Ambient Temperature -40 ... 85 °C -55 ... 85 °C V18311H X X X X XX X 0 0 1 3 4 6 7 A D 1) 2) 1) 1) 1) 1 A 6 8 9 1 2 8 0 1 2 0 10 20 3) 1 2 0 0 12 10/18-0.10-EN Rev. C | TEIP11-PS

  13. Additional ordering information TEIP11-PS XXX XXX XXX XXX XXX XXX Certificate of Compliance Certificate of compliance with the order acc. EN 10204-2.1 (DIN 50049-2.1) with item description Test report 2.2 acc. EN 10204 (DIN 50049-2.2) Inspection Certificate Inspection certificate 3.1 acc. EN 10204 Device Identification Label Stainless steel 18.5 x 65 mm (0.73 x 2.56 in.) Sticker 11 x 25 mm (0.43 x 0.98 in.) Operation with Inflammable Gas Increased climate stability Operation with inflammable gas No special approval Special Input Signal 0 ... 10 mA 10 ... 20 mA 4 ... 12 mA 12 ... 20 mA Specify split-range Special input range No special input range Special Output Signal 1 ... 18 psi 20 ... 100 kPa 0.2 ... 1 kg/cm^2 0.2 ... 1.8 bar 3 ... 27 psi 0.4 ... 2 bar 6 ... 30 psi Special output signal 1) Only with aluminium or stainless steel field housing 2) Not with field housing 3) Not with explosion protection Ex d or FM / CSA explosion proof 4) Only for signal converter EEx ia IIC with polyester field housing 5) Supply pressure 2.5 bar 6) Supply pressure 37 psi Accessories TEIP11-PS Cable gland EEx d, brass, M 20 x 1.5 thread TEIP11-PS Mounting bracket, stainless steel, for wall mounting TEIP11-PS Mounting bracket, stainless steel, for wall or 2 in. pipe mounting TEIP11-PS Connection block for 4 converters TEIP11-PS Termination block with central supply air connection 3/8 NPT TEIP11-PS Termination block without connection CF2 CF3 CBA MK1 MK3 300 4) 480 999 501 502 503 504 505 506 999 5) 6) 5) 6) 511 513 514 515 512 508 509 999 Order code 319343 319344 319345 7958243 7958251 7958245 TEIP11-PS | 10/18-0.10-EN Rev. C 13

  14. Notes Notes 14 10/18-0.10-EN Rev. C | TEIP11-PS

  15. Notes Notes TEIP11-PS | 10/18-0.10-EN Rev. C 15

  16. Contact us 10/18-0.10-EN Rev. C 12.2013 Note We reserve the right to make technical changes or modify the contents of this document without prior notice. With regard to purchase orders, the agreed particulars shall prevail. ABB does not accept any responsibility whatsoever for potential errors or possible lack of information in this document. We reserve all rights in this document and in the subject matter and illustrations contained therein. Any reproduction, disclosure to third parties or utilization of its contents - in whole or in parts – is forbidden without prior written consent of ABB. Copyright© 2013 ABB All rights reserved ABB Limited Process Automation Salterbeck Trading Estate Workington, Cumbria CA14 5DS UK Tel: +44 (0)1946 830 611 Fax: +44 (0)1946 832 661 ABB Inc. Process Automation 125 E. County Line Road Warminster, PA 18974 USA Tel: +1 215 674 6000 Fax: +1 215 674 7183 ABB Automation Products GmbH Process Automation Schillerstr. 72 32425 Minden Germany Tel: +49 551 905-534 Fax: +49 551 905-555 www.abb.com 3KXE311001R1001 Sales Service

More Related