1 / 34

MPEG1 Coding Standard

MPEG1 Coding Standard. By: Richard M Tarbell. MPEG: Motion Picture Expert Group . First devised in 1988 by a group of almost 1000 experts Primary motivations: High compression rate for video storage comparable to VHS quality Random access capability

LionelDale
Download Presentation

MPEG1 Coding Standard

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. MPEG1 Coding Standard By: Richard M Tarbell

  2. MPEG: Motion Picture Expert Group • First devised in 1988 by a group of almost 1000 experts • Primary motivations: • High compression rate for video storage comparable to VHS quality • Random access capability • Overall MPEG standard combines video and audio signal into one large compression algorithm

  3. Standard Specs of MPEG1 • Works at 1.5 megabits per second bitrate • Bitrate = (length * width * depth * fps) / (compression ratio) • Makes use of the 8x8 discrete cosine transform (DCT) for intraframe compression • Uses an algorithm to reduce both temporal redundancy and spatial redundancy • The code can use several different variable length codebooks to achieve a higher compression ratio • the more codebooks used, the higher the potential compression ratio

  4. MPEG1 • Was specifically designed for digital storage media • Did not initially lend itself to: • Real time applications such as videophone and video-over-IP • Applications that involve no long-term storage medium • Uses a complex compression algorithm to allow for a simple decompression algorithm • Simple decompression algorithm allows for real-time decompression

  5. MPEG1 Compression Aspects • Lossless and Lossy compression are both used for a high compression rate • Interframe compression • Correlation/compression between like frames • Based on H.261 compression standard • Intraframe compression • Correlation/compression within a frame • Based on “baseline” JPEG compression standard • Audio compression • Three different layers (MP3)

  6. What defines good video quality? • Size of pictures • Bitrate of channel medium (especially in real-time applications) • Resolution of the original images and/or frames • Frame rate of source AND frame rate of reproduction medium (24 frames per second is standard movie quality) If any one of these factors is inferior, it can bottleneck the overall system and cause reduction in video quality: GIGO  garbage in = garbage out !!!

  7. Intraframe Coding: Compression within each individual frame • Intraframe Compression: • Reduces spatial redundancy to reduce necessary transmission rate • Encoding I blocks are practically identical to JPEG standard • Makes use of the DCT transform along with zigzag ordering

  8. Video Coloring Scheme • Translate the RGB system into a YUV system • Human perception is less sensitive to chrominance than to brightness • Translate brightness into chrominance and then the resolution does not have to be as good  lower necessary bitrate Coloring Scheme: Normal JPEG Coloring Blocks Red Blue Green Translation formulas: Y = Wr*R + Wb*B + Wg*G Cr =Wr* (R - Y) Cb =Wb* (B - Y) Cg =Wg* (G - Y) Yellow Cr Cb Cg

  9. According to dictionary.com: • chro·mi·nance P Pronunciation Key  (kr m-n ns)n. • The difference between one color and a reference color of the same brightness and chromaticity. GOB: Group of Blocks, composed of 33 macroblocks in an 11x3 arrangement • Macroblock: composed of six blocks (4:2:0 or 4:1:1 format) • Four blocks of yellow (luminance) • One block of Cb (chrominance) • One block of Cr (chrominance)

  10. Encoding an Image Into a JPEG Block • Divide the image into blocks, the size of each block is 8x8 • Level shift and use the 8x8 DCT transform • If there exists a block or several blocks that are not of size 8x8, then force them to be by replicating the last column or row until proper dimension is achieved DC and low frequencies High frequencies

  11. Once the 8x8 matrix has been formed, it is quantized…..

  12. After quantization, the 8x8 matrix is transformed into a single vector using zigzag extraction: DataVector = Cat(1,2,3,4,5,…….63,64)

  13. Why a zig-zag pattern? • The zig-zag pattern starts with DC and low frequency values first and proceeds to high frequency values last • Most individual frames and blocks have much more energy in the low frequency spectrum than in the high frequency spectrum • Allows for better prediction to be made once the data vector has been assembled: …………………….. Data vector is generally monotonically decreasing in energy, most energy is in first few blocks

  14. Data Compression of the New Vector • Run-length code for grey: • long “runs” of grey can be stored like so: (Grey color) (* 3) (regular color) (regular color) (Grey color) (* 4) • Huffman coding: • Lossless coding • Use tree diagram to decide how to encode all values • Assign the shortest codewords to the most frequent values • Assign longest codewords to least frequent values

  15. Random Access and Interframe Compression • Prediction that does not depend upon the user accessing the first frame (skipping through movie scenes, arbitrary point pick-up • Random access capability • Temporal Redundancy • Only perform repeated encoding of the parts of a picture frame that are rapidly changing • Do not repeatedly encode background elements and still elements 

  16. Decoding with non-random access • Decoding and playing sub-frames located in section G, • All frames before section G must be decoded as well • Synchronization algorithm issues. • If section G is far along in the movie, this could take a considerable amount of time.

  17. Decoding with random access Introduce “I” frames, frames that are NOT predictively encoded by design Frames that are still encoded using a prediction algorithm are called “P” frames • When decoding any frame after an I frame (frame G in this example) • we only have to decode past frames until we reach an I frame • saves time when skipping from frame to frame • I frames are not predictively encoded • reduction in compression ratio • Depending on the concentration of I frames, there is a tradeoff: • More I frames  faster random access time • Less I frames  better compression ratio

  18. Most MPEG1 implementations use a large number of I frames to ensure fast access • -Somewhat low compression ratio by itself • For predictive coding, P frames depend on only a small number of past frames • -Using less past frames reduces the propagation error • To further enhance compression in an MPEG1 file, introduce a third frame called the “B” frame  bi-directional frame • B frames are encoded using predictive coding of only two other frames: a past frame and a future frame • By looking at both the past and the future, this helps reduce prediction error due to rapid changes from frame to frame (i.e. a fight scene or fast-action scene) I P P  

  19. Predictive coding hierarchy: I, P, and B frames • I frames (black) do not depend on any other frame and are encoded separately • Called “Anchor frame” • P frames (red) depend on the last P frame or I frame (whichever is closer) • Also called “Anchor frame” • B frames (blue) depend on two frames: the closest past P or I frame, and the closest future P or I frame • B frames are NOT used to predict other B frames, only P frames and I frames are used for predicting other frames

  20. MPEG1 Temporal Order of Compression • I frames are generated and compressed first • Have no frame dependence • P frames are generated and compressed second • Only depend upon the past I frame values • B frames are generated and compressed last • Depend on surrounding frames • Forward prediction needed 1 3 4 5 6 12 13 14 15 2 8 9 10 11 7

  21. Differences Between MPEG1 and H.261 • Computational cost • - MPEG1 is more advanced  higher computation • MPEG1 uses I, P, and B frames, H.261 uses I and P frames • Large gaps between I frames and P frames • Predicted frame and reference frame are not necessarily adjacent • Higher coding rate • More prediction error due to larger distance between predicted frame and reference frames • Prediction of B frame uses two references • One past frame and one future frame forward prediction • MPEG1 was intended for motion pictures  not real time • -H.261 was intended for video conferencing

  22. Rate control and MPEG1 • Although MPEG1 is for storage, rate control is possible in certain software packages/modifications • Techniques to increase code rate • Increase quantizer step size to reduce picture quality • B frame quality is reduced first to reduce net error • No other frame depends on a B frame

  23. MPEG Audio Compression • First developed to compress 1.5 Mbits/sec (normal uncompressed audio stream) into 56 kbits/sec (the rate of a basic dialup modem) • Can encode mono, stereo, and joint-stereo audio • Designed for generic waveforms (not partial to speech) • Many different standard sampling rates: • 16kHz, 22.05kHz, 24kHz, 32 kHz, 44.1 kHz, 48 kHz • Uses sub-band filtering • 32 filter bands for layers I and II • 32 filter bands and 18 sub-bands for layer III (576 bands total) • Each is equidistant in bandwidth (width = Fs / 64)

  24. Layers of MPEG Audio • Layer I • 12 samples per sub-band (384 total samples) • Compression ratio: approx 4:1 • Around 384kbps (depends on chosen sampling rate) • Layer II • 36 samples per sub-band (1152 total samples) • Compression ratio: approx 6:1 to 8:1 • Around 256kbps to 192kbps • Layer III • 12 samples per sub-band (384 total samples) • Compression ratio: approx 10:1 to 12:1

  25. Perceptual Coding and Psychoacoustics • Similar concept to MPEG interframe coding: irrelevancy is identified and then removed • This is called auditory masking • Input signal is quantized according to a level that meets both bitrate and masking requirements • DFT of the input is taken, masking takes place on several levels

  26. Two major types of masking take place for encoding: • Temporal Masking: loud noises that occur close to each other in time (about 3 to 5 milliseconds) can be approximated by a single loud noise • Frequency Masking: areas of the spectrum that have high energy and are close together can be filtered to eliminate “spikes” in the spectrum

  27. Human Perception • Smallest signal perception is 0dB (JBN) • Largest signal perception is about 135dB (threshold of pain)  Dynamic range of about 5,000,000 to 1 (ratio of largest signal to smallest signal)

  28. Normal Spectrum

  29. Auditory Masking Spectrum

  30. Encoding model for Layer I ========= ========= ========

  31. MPEG1 Audio Encoding Process • Break the signal into frames (a frame is usually several milliseconds in length) 2. Determine spectral energy distribution by taking the DFT, then break this distribubtion into sub-bands via filtering 3. Consider the specified bit rate (this will determine the number of bits per frame that can be used)

  32. 4. Compare the DFT signal to the human psychoacoutic model, perform masking 5. Use a modified Huffman code to achieve compression 6. After each frame has been compressed, place a header on each frame 7. Reassemble the new frames with headers back into a continuous bit stream

  33. MPEG1 Audio is Used: • In CD format (first intentions were for the CD) • VCD and DVD formats (even though MPEG1 picture format is obsolete for these kinds of media) • As a basis for AAC audio (AAC was modeled to rival MPEG2 audio, AAC is considered to be superior to MP3 audio) • MPEG1 layers I and II were based off of Sony MUSICAM technology

  34. Primary References: • http://www.MPEG.org • Sayood, Khalid. Introduction to Data Compression, 2nd Edition. 2000, Morgan Kaufmann Publishers: San Diego. • Berkely Multimedia Research Center • http://www.bmrc.berkely.edu

More Related