1 / 50

Equations of State

Equations of State. Compiled by: Gan Chin Heng / Shermon Ong 07S06G / 07S06H. Pressure. Solid. Liquid. Critical point. Triple point. Gas. Temp. How are states represented?. Diagrammatically (Phase diagrams). How are states represented?. Mathematically Using equations of state

Lucy
Download Presentation

Equations of State

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Equations of State Compiled by: Gan Chin Heng / Shermon Ong 07S06G / 07S06H

  2. Pressure Solid Liquid Critical point Triple point Gas Temp How are states represented? • Diagrammatically (Phase diagrams)

  3. How are states represented? • Mathematically • Using equations of state • Relate state variables to describe property of matter • Examples of state variables • Pressure • Volume • Temperature

  4. Equations of state • Mainly used to describe fluids • Liquids • Gases • Particular emphasis today on gases

  5. ABCs of gas equations • Avogadro’s Law • Boyle’s Law • Charles’ Law • A • B • C

  6. Avogadro’s Law • At constant temperature and pressure • Volume of gas proportionate to amount of gas • i.e. V  n • Independent of gas’ identity • Approximate molar volumes of gas • 24.0 dm3 at 298K • 22.4 dm3 at 273K

  7. Boyle’s Law • At constant temperature and amounts • Gas’ volume inversely proportionate to pressure, i.e. V  1/p • The product of V & p, which is constant, increases with temperature

  8. Charles’ Law • At constant pressure and amounts • Volume proportionate to temperature, i.e. V  T • T is in Kelvins • Note the extrapolated lines (to be explained later)

  9. Combining all 3 laws… • V  (1/p)(T)(n) • V  nT/p • Rearranging, pV = (constant)nT • Thus we get the ideal gas equation: pV = nRT

  10. Assumptions

  11. It’s downright squeezy here But sadly assumptions fail…Nothing is ideal in this world…

  12. Failures of ideal gas equation • Failure of Charles’ Law • At very low temperatures • Volume do not decrease to zero • Gas liquefies instead • Remember the extrapolated lines?

  13. Failures of ideal gas equation • From pV = nRT, let Vm be molar volume • pVm = RT • pVm / RT = 1 • pVm / RT is also known as Z, the compressibility factor • Z should be 1 at all conditions for an ideal gas

  14. Failures of ideal gas equation • Looking at Z plot of real gases… • Obvious deviation from the line Z=1 • Failure of ideal gas equation to account for these deviations

  15. So how? • A Dutch physicist named Johannes Diderik van der Waals devised a way...

  16. Johannes Diderik van der Waals • November 23, 1837 – March 8, 1923 • Dutch • 1910 Nobel Prize in Physics

  17. So in 1873… I can approximate the behaviour of fluids with an equation Scientific community ORLY? YARLY!

  18. Van der Waals Equation • Modified from ideal gas equation • Accounts for: • Non-zero volumes of gas particles (repulsive effect) • Attractive forces between gas particles (attractive effect)

  19. Van der Waals Equation • Attractive effect • Pressure = Force per unit area of container exerted by gas molecules • Dependent on: • Frequency of collision • Force of each collision • Both factors affected by attractive forces • Each factor dependent on concentration (n/V)

  20. Van der Waals Equation • Hence pressure changed proportional to (n/V)2 • Letting a be the constant relating p and (n/V)2… • Pressure term, p, in ideal gas equation becomes [p+a(n/V)2]

  21. Van der Waals Equation • Repulsive effect • Gas molecules behave like small, impenetrable spheres • Actual volume available for gas smaller than volume of container, V • Reduction in volume proportional to amount of gas, n

  22. Van der Waals Equation • Let another constant, b, relate amount of gas, n, to reduction in volume • Volume term in ideal gas equation, V, becomes (V-nb)

  23. Van der Waals Equation • Combining both derivations… • We get the Van der Waals Equation

  24. Van der Waals Equation -> So what’s the big deal? • Real world significances • Constants a and b depend on the gas identity • Relative values of a and b can give a rough comparison of properties of both gases

  25. Van der Waals Equation -> So what’s the big deal? • Value of constant a • Gives a rough indication of magnitude of intermolecular attraction • Usually, the stronger the attractive forces, the higher is the value of a • Some values (L2 bar mol-2): • Water: 5.536 • HCl: 3.716 • Neon: 0.2135

  26. Van der Waals Equation -> So what’s the big deal? • Value of constant b • Gives a rough indication of size of gas molecules • Usually, the bigger the gas molecules, the higher is the value of b • Some values (L mol-1): • Benzene: 0.1154 • Ethane: 0.0638 • Helium: 0.0237

  27. Critical temperature and associated constants

  28. Critical temperature? • Given a p-V plot of a real gas… • At higher temperatures T3 and T4, isotherm resembles that of an ideal gas

  29. Critical temperature? • At T1 and V1, when gas volume decreased, pressure increases • From V2 to V3, no change in pressure even though volume decreases • Condensation taking place and pressure = vapor pressure at T1 • Pressure rises steeply after V3 because liquid compression is difficult

  30. Critical temperature? • At higher temperature T2, plateau region becomes shorter • At a temperature Tc, this ‘plateau’ becomes a point • Tc is the critical temperature • Volume at that point, Vc = critical volume • Pressure at that point, Pc = critical pressure

  31. Critical temperature • At T > Tc, gas can’t be compressed into liquid • At Tc, isotherm in a p-V graph will have a point of inflection • 1st and 2nd derivative of isotherm = 0 • We shall look at a gas obeying the Van der Waals equation

  32. VDW equation and critical constants • Using VDW equation, we can derive the following

  33. VDW equation and critical constants • At Tc, Vc and Pc, it’s a point of inflexion on p-Vm graph

  34. VDW equation and critical constants

  35. VDW equation and critical constants • Qualitative trends • As seen from formula, bigger molecules decrease critical temperature • Stronger IMF increase critical temperature • Usually outweighs size factor as bigger molecules have greater id-id interaction • Real values: • Water: 647K • Oxygen: 154.6K • Neon: 44.4K • Helium: 5.19K

  36. Compressibility Factor

  37. Compressibility Factor • Recall Z plot? • Z = pVm / RT; also called the compressibility factor • Z should be 1 at all conditions for an ideal gas

  38. Compressibility Factor • For real gases, Z not equals to 1 • Z = Vm / Vm,id • Implications: • At high p, Vm > Vm,id, Z > 1 • Repulsive forces dominant

  39. Compressibility Factor • At intermediate p, Z < 1 • Attractive forces dominant • More significant for gases with significant IMF

  40. Boyle Temperature • Z also varies with temperature • At a particular temperature • Z = 1 over a wide range of pressures • That means gas behaves ideally • Obeys Boyle’s Law (recall V  1/p) • This temperature is called Boyle Temperature

  41. Boyle Temperature • Mathematical implication • Initial gradient of Z-p plot = 0 at T • dZ/dp = 0 • For a gas obeying VDW equation • TB = a / Rb • Low Boyle Temperature favoured by weaker IMF and bigger gas molecules

  42. Virial Equations

  43. Virial Equations • Recall compressibility factor Z? • Z = pVm/RT • Z = 1 for ideal gases • What about real gases? • Obviously Z ≠ 1 • So how do virial equations address this problem?

  44. Virial Equations • Form • pVm/RT = 1 + B/Vm + C/Vm2 + D/Vm3 + … • pVm/RT = 1 + B’p + C’p2 + D’p3 + … • B,B’,C,C’,D & D’ are virial coefficients • Temperature dependent • Can be derived theoretically or experimentally

  45. Virial Equations • Most flexible form of state equation • Terms can be added when necessary • Accuracy can be increase by adding infinite terms • For same gas at same temperature • Coefficients B and B’ are proportionate but not equal to each other

  46. Summary

  47. Summary • States can be represented using diagrams or equations • Ideal Gas Equation combines Avagadro's, Boyle's and Charles' Laws • Assumptions of Ideal Gas Equation fail for real gases, causing deviations • Van der Waals Gas Equation accounts for attractive and repulsive effects ignored by Ideal Gas Equation

  48. Summary • Constants a and b represent the properties of a real gas • A gas with higher a value usually has stronger IMF • A gas with higher b value is usually bigger • A gas cannot be condensed into liquid at temperatures higher than its critical temperature

  49. Summary • Critical temperature is represented as a point of inflexion on a p-V graph • Compressibility factor measures the deviation of a real gas' behaviour from that of an ideal gas • Boyle Temperature is the temperature where Z=1 over a wide range of pressures • Boyle Temperature can be found from Z-p graph where dZ/dp=0

  50. Summary • Virial equations are highly flexible equations of state where extra terms can be added • Virial equations' coefficients are temperature dependent and can be derived experimentally or theoretically

More Related