1 / 47

RHEOLOGY of Coatings

RHEOLOGY of Coatings. Overview. 1 Simple Test Methods , and Rheometry 2 Flow behavior during the Application 3 Behavior after the Application 4 Long- term Storage Stability 5 Curing of Powder Coatings and UV – Coatings. 1 Simple Test Methods.

agrata
Download Presentation

RHEOLOGY of Coatings

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. RHEOLOGY of Coatings

  2. Overview • 1 Simple Test Methods, andRheometry • 2 Flow behaviorduringtheApplication • 3 Behavior after theApplication • 4 Long-term Storage Stability • 5 CuringofPowderCoatingsand UV – Coatings

  3. 1 Simple Test Methods trowel test- high-viscosity fluids: “thick“- low-viscosity fluids: “thin“e.g. for dispersions finger test- tacky: “long“ - lesstacky: “short“e.g. forpaints, offset-printinginks, pigmentpastes

  4. 1 Simple Test Methods Flow Cups measurementoftheflow timeoflow-viscosityliquids todeterminethekinematicviscosity (weight-dependentviscosity !) Examples: oils, solvent-basedcoatings, gravureandflexoprintinginks

  5. 1 Simple Test Methods weight Falling - rodViscometers determinationofthe timeoftherod totraveldownwards over a defineddistance e.g. fortesting offset-printinginks (highlyviscous) andpastes printing ink falling rod falling-rod viscometer, e.g. type Laray

  6. 1 Simple Test Methods preset: rotational speedmeasurement: torque RotationalViscometers fortesting „Low - shearViscosity“ (LSV) (whichis in fact not reallylow-shear) Using the typical spindles relative viscosity values are measured • cylinders • disks • pins • T-bars

  7. 1 Simple Test Methods RotationalViscometers fortesting „Medium – shearViscosity“ (MSV) originally preset: force(constanttorque), using a freelyfallingweight (in grams), measurement: rotationalspeedoftherotationalmeasuringsystem nowadays: presetofthespeed, measurementofthetorque Krebs spindles stirrer-like „paddles" relative viscosity valuesare measured here; typically given in Krebs Units, KU

  8. 1 Simple Test Methods Cone & Plate Viscometers fortesting „High - shearViscosity“ (HSV) preset: rotationalspeedmeasurement: torque Problem: Frictionbetweenconeandplate, sincethetipoftheconeis not truncated, sittingdirectly on thebottomplate. Consequence: Frictioninfluences themeasuringresults

  9. 1 Simple Test Methods helix 1 helix 2 blade anchor ball measuring system all these kinds of stirrers are relative measuring systems stirrerfor buildingmaterials starch stirrer

  10. 1 RheometryMeasuring Systems for Absolute Values Measuring Geometries forrotationalandoscillatoryrheometer accordingto DIN 53019 and ISO 3219 Cone & Plate, CP forliquids; fordispersionsonlywith a limittedparticlesize (usually < 10 µm) Parallel - Plates, PP usefulfordispersionscontaining coarseparticles, pastes, offset-printinginks, gel-likematerials, polymer melts ConcentricCylinders, CC forlow-viscosityliquids, solvent-bornecoatings

  11. 2 Application (flowbehavior) • Flow behaviorduringtheapplication • - Applicationbehavior in theflowingstatewhenstirring, painting, brushing, rolling, sprayingwhenpumping, dosing, blading,flatstreamapplication, dipcoating, pouring, • usingrobotersorhigh-rotationaldisksorbells • Test method: Flow curves, at medium andhigh shearrates (rotation) • Requirements: • - ability to brush • limited coating force • no spatters • roller resistance

  12. 2 Application (flow behavior) Coating, Painting, Brushing Application Example brush velocity (v = 0.5 m/s) wet layerthickness (h = 200 µm) calculation of the shear rate: Brushing, Paintingatmedium andhigh shear rates between 100 and 10,000 s-1

  13. 2 Application (flowbehavior) Industrial Spray Processes • Application examples : • Automotive coatings- spray roboters • high-rotational atomizers, electrostatically supported Requirements: - ability to pump - ability to spray Quelle: Fotos vom Daimler-Museum, Stuttgart

  14. car body degreasing & phosphatizing electro dip coating seam sealing underbody spraying filler base coat and clear coat cavity conservation 2 Application (flowbehavior) Sprayingof Automotive Coatings a) Plastisols: seamsealingandunder-bodysealingb) Coatings: dipcoating, filler, basecoat, clearcoatc) Waxes: cavityconservation Spraying, Coating at high shear ratesof 1000 to 10,000 s-1

  15. 2 Application (flow behavior) Shear Rate Range

  16. 2 Application (flowbehavior) Overview: Flow & ViscosityCurves flowcurves yieldpoint viscositycurves    1 ideallyviscous (Newtonian) 4 without a yieldpoint 2 shear-thinning (pseudoplastic) 5 having a yieldpoint 3 shear-thickening (dilatant)

  17. 2 Application (flow behavior) Flow Curves 1000 10 Water mPa mPas 10 lg h 1 lg t 1 DG 42 (double - gap) T = +20°C constant viscosity, ideally viscous flow behavior 0,1 0,1 0,01 1 10 s-1 100 lg Double-gap measuring systems are special systems designed forlow - viscosity liquids.

  18. shear rate 2 Application (flow behavior) Flow Curves Shear-thinning flow behavior 0.5 150 Wall Paper Paste aqueousmethylcellulosesolution T = +23°C Pas Pa 0.4 100 h t 0.3 50 0.2 typical behavior of polymer solutions: continuosly shear-thinning 0.1 0 0 200 400 600 s-1 1000

  19. 2 Application (flow behavior)Shear-Thinning Behavior material atrest:undershear:highviscositydecrease in viscosity suspension with needle-shaped or platelet-shapedparticles (e.g. flakes in metallic-effect automotive coatings) The particlesareThe particlesaresuspendedrandomlyorientated in(iftherearenoflowdirection.interactionforces). consequence: shear - thinningflowbehavior, decreasingviscosity

  20. 2 Application (flow behavior) Effect of rheological additives (1) Example: comparisonofflowbehaviorof a water-baseddispersionwith additive 1, a „gellant“ e.g. clay additive 2, a „viscosifier“ e.g. anassociativethickener 1 2 flowcurves on a linearscale flowcurves on a logarithmicscale 2 1  lg 1 with yield point 2 lg Summary: The gellant shows is effective especially in the low-shear range(or at rest, resp.), and the viscosifier in the high-shear range.

  21. 2 Application (flow behavior) Effect of rheological additives (2)  coating processes shear - thinning flowbehavior Summary: A single - point viscositymeasurement is not sufficient.  Brookfield   Krebs  -Stormer lg  flow cups  viscosity Coating 1Coating 2 lg shear rate low - shear rangehigh - shear range stirring,painting, rolling,spatters (?)spray coating

  22. 2 Application (flow Behavior) Effect of Rheobogical Additives (3) Different rheological additives asthickeners (example:water-basedcoatings) (1) silica (clay, inorganicgellant (2) cellulose derivative, polymer solution (3a) unmodifiíed polymer dispersion (3b) polymer dispersionwith an associativethickener(bar length: 100 nm = 0.1 µm) (1) (2) rightside:whensheared leftside:atrest (3a) (3b) For polymer dispersions: lowerviscosityeventhoughthehigher molar massofthe polymer

  23. 2 Application (flow behavior) Effect of Rheological Additives (4) Viscosityfunctionsofpigmentedwater-basedcoatings containing different rheological additives asthickeners, in principle: (1) silica (clay), inorganicgellant (2) cellulose derivative, polymer solution (3a) unmodifiíed polymer dispersion (3b) polymer dispersionwith an associativethickener

  24. 3 Behavior after application • 3 Behaviorafter theapplication • - levelling, gloss, de-aeration • - sagging, wetlayerthickness, edge cover • structurerecovery, time-dependent „thixotropicbehavior“ • Test method: steptest, low – high – lowshear (rotationoroscillation)

  25. 3 Behavior after application LevellingandSagging Application examples: - brush coatings- spray coatings Requirements:- Levelling without brush marks or other flow defects - controlled sagging - desired layer thickness

  26. 3 Behavior after application LevellingandSagging Levelling, Brush Marks, Wet-layer Thickness, SaggingExample: Brush Paints at very low shear rates between 0.01 and 1 s-1(or at rest, respectively)

  27. 3 Behavior after application LevellingandSagging AutomotiveCoating: High-rotational atomizer(bell), electrostatically supported spray process Example for surface treatment of cars: 1 car body mould metal sheet 2 kathodic dipping process, anti-corrosion protection 3 functional layer 4 water-base coat 5 clear coat spray coating problem: sag control Quelle: Fotos vom Daimler-Museum, Stuttgart

  28. 3 Behavior after application PrintingProcess Application examples: - printing inks Requirements: - area printing: without levelling problems - halftone printing: dot sharpness

  29. 3 Behavior after application Shear Rate Range

  30. 3 After Coating Step Tests (Rotation): Structure Recovery a) rotation (3 intervals) Preset: three steps low / high / low shear rate Result: time - dependent viscosity

  31. 3 After Coating Step Tests (Rotation): Structure Recovery ComparisonoftwoFormulationsofCoatings :Step Test with 3 Intervals 100 = 0.1 s-1 = 0.1 s-1 Structure recoveryis fasterwith the „gellant“ - less sagging, - high wet-layer thickness, - but maybe poor leveling Pas 10 lgh structure recovery Structure recoveryis slower with the „thickener“ - good leveling, - but maybe too much sagging 1 = 100 s-1 0.1 0 100 200 300 400 500 600 700 s time t

  32. 3 After CoatingStep Tests (Oscillation): StructureRecovery b) oscillation (3 intervals) Preset: three steps low / high / low strain amplitude Result: the two time-dependent functions of G'' (viscous) and G' (elastic behavior)

  33. 3 After CoatingStep Tests (O-R-O): StructureRecovery Steptestwith 3 intervals, asoscillation / rotation / oscillation(measuring „thixotropicbehavior“) preset: 1 low-shearconditions(strain in the LVE-range, oscillation) 2 high-shearconditions (rotation) 3 low-shearconditions(strain in the LVE-range, oscillation) measuringresult: 1 stateofrest 2 structuredecomposition 3 structureregeneration 2nd test interval:liquid, at high shear rates 1st & 3rd test interval:G‘ > G‘‘ („gel-like structure“ at rest)

  34. crossover G‘ = G‘‘ 10 Pa 1 lg G' 0.1 lg G'' 0.01 g= 0.2% g= 0.2% = 15,000 s-1 time t 100 200 300 500 600 s 3 After CoatingStep Tests (O-R-O): StructureRecovery Comparison: 2 Spray Coatings, Step Tests in Oscillation / Rotation / Oscillation • Structure recovery • liquid, • as long as G‘‘ > G‘ • for leveling • 2) „gel - like“, • when G‘ > G‘‘ • sagging is stopped • Analysis: • Time point of • crossover • G‘ = G‘‘ • can be optimized • by rheological • additives. Spritzlack 3(mit Additiv B) G' G'' Spritzlack 2(mit Additiv A) G' G'' Spritzlack 1(ohne Additiv) G' G''

  35. 3 After CoatingStep Tests: StructureRecovery a) rotation (3 intervals) result: time-dependent viscosity (here, the viscous behavior is measured only !) b) oscillation (3 intervals) result: two time-dependent functions G'' (viscous) and G' (elastic) here, the wholeviscoelastic behavior is measured.

  36. 4 Storage Stability • 4 Long-term storagestability • - settling(sedimentation), flotation • syneresis („blooding“), demixing • appearance after a time ofrest („consistency“) • transportstability • gelationeffects, fluidisation •  Test method:frequencysweep (oscillation), lowfrequencies

  37. 4 Storage Stability Sedimentation Application examples: - emusion paints - coatings with metallic - effect Requirements: - no demixing- no sedimentation - no syneresis

  38. 4 Storage Stability Shear Rate Range

  39. 4 Storage Stability Simple Method: Yield Point Controlled stress rotationaltests: Flow Curves on a linearscale Yield Point as a limitingvalueoftheshear stress  2 Break of the structure - at - rest. Super - structure by a chemical - physical network via interactive forces. 1 ty  1 without a yield point 2 having a yield point y

  40. Storage Stability • FrequencySweep: Long-termBehavior Preset: constantamplitude, shearstrainorshear stress (withinthe LVE - range)andvariable frequency Precondition: First of all, the LVE - rangehastobecheckedby an amplitudesweep.

  41. 10 Pa 0.1 0.001 -3 -2 -1 0 1 2 10 10 10 10 10 rad/s 10 4 Storage Stability FrequencySweep: Long-term Behavior ComparisonoftwoCoatings: Dispersion Stability G' > G'' 1 lg G' Long - term storage stability: Evaluation at a low frequencyG' > G'' hence „gel - like“,stable dispersion (Top Coat). G'' > G' hence „liquid - like“, unstable dispersion (Primer). lg G'' G'' > G' 0.01 g= 1 %T = +23°C angular frequencylg

  42. 5 CuringCoatings 5 Curing (powdercoatings, UV – coatings) - time - dependentandtemperature - dependentmeltingandcuring

  43. 5 CuringCoatings Examples Application examples: - powder coatings- UV – curing coatings Foto: AlzChem • Requirements: • melting • netting of the subtrate • good levelling Foto: DuPont Performance Coatings Foto: BASF Coatings

  44. 5 CuringCoatings Rotational Tests gel formation and curing preset: constant shear conditions (shear rate or shear stress)result: viscosity / temperature curve showing a viscosity minimum

  45. 5 CuringCoatings Oscillatory Tests gelformation, hardeningorcuringprocess preset: constantshearconditions (amplitudeandfrequency) results: temperature-dependent G' and G'' curves Tm... meltingtemperature(when G' = G'') TCR... temperatureattheonsetofthehardeningprocess, gelformation, curingorchemicalreaction TSG... sol /geltransition (whenagain G' = G'')

  46. 6 200 10 °C 180 Pa 160 5 10 140 Powder Coat 1 G' 120 G'' G' 4 100 T 10 T G'' Powder Coat 2 80 G' 60 G'' 3 10 T 40 20 2 0 10 0 100 200 300 400 500 600 700 800 s 1,000 time t 5 CuringCoatings Oscillatory Tests Comparison of two Powder Coatings g = 0.1 % ω = 10 rad/s preset: T = T(t)

More Related