1 / 11

MANUFACTURING PROCESS

PLASTIC WATER BOTTLE. MANUFACTURING PROCESS. 2011011715 Park JeongBeom 2011011717 Baek HaeEun. CONTENTS. Picture What is the PET ? Manufacturing process 1. Design a form( 디자인 제작 ) 2. Blow Moulding ( 블로우 몰딩 ) 3. Injection Hot Air( 뜨거운공기 주입 ) 4. Cooling and Proudct ( 냉각 및 제품생산 ).

Download Presentation

MANUFACTURING PROCESS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. PLASTIC WATER BOTTLE MANUFACTURING PROCESS 2011011715 Park JeongBeom 2011011717 BaekHaeEun

  2. CONTENTS • Picture • What is the PET ? • Manufacturing process 1. Design a form(디자인 제작) 2. Blow Moulding(블로우몰딩) 3. Injection Hot Air(뜨거운공기 주입) 4. Cooling and Proudct(냉각 및 제품생산)

  3. PICTURE

  4. What is the Pet? • PET = POLY ETHYLENE TEREPHTH * TEREPHTHALATE ACID (테레프탈산) + ETHYLENE GLYCOL(에틸렌글리콜) PET

  5. <Manufacturing Process> 1. Design a Form(디자인 제작)

  6. <Manufacturing Process> 2. Blow Moulding(블로우몰딩) • What is Blow Moulding? • One of the plastic molding Process. • Make a tool and pour into the material • Heating Hot Air into the Mold. Ex) bottle, polyethylene…

  7. <Manufacturing Process> 2. Blow Moulding(블로우몰딩) • 1. Make a mold about Design.

  8. <Manufacturing Process> 2. Blow Moulding(블로우몰딩) • 2. Pour into the material in the mold.

  9. <Manufacturing Process> 3. Injection Hot Air(뜨거운 공기 주입)

  10. <Manufacturing Process> 4. Cooling & Proudct (냉각 및 제품생산)

  11. THANK YOU

More Related