1 / 8

Cleaning Field Sprayers to Avoid Crop Injury

Cleaning Field Sprayers to Avoid Crop Injury. Is it drift or is it a contaminated sprayer?. Sprayer contamination could result in:. Symptoms that appear drift-like Crop loss Environmental pollution Reduced effectiveness of the tank mix Fines Lawsuits Loss of certification Loss of income.

albert
Download Presentation

Cleaning Field Sprayers to Avoid Crop Injury

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Cleaning Field Sprayers to Avoid Crop Injury Is it drift or is it a contaminated sprayer?

  2. Sprayer contamination could result in: • Symptoms that appear drift-like • Crop loss • Environmental pollution • Reduced effectiveness of the tank mix • Fines • Lawsuits • Loss of certification • Loss of income

  3. Sources of Contamination of Spray Equipment: • Improper or inadequate cleanout • Redissolved residues • Contamination from using remix water • Poly fiber tanks, old hoses • Low-rate actives with highly active molecules • Presence of tank mix partners • Mini-bulk contamination - repackaging

  4. Ways to reduce or avoid contamination: • Use pesticide resistant materials • stainless steel tanks • Removing enough liquid during the cleanout process • ‘Follow’ proper cleanout procedures • label information if provided • Extension publications • Adopting engineering controls • tank rinsing nozzles • Use special cleaners • Use a dedicated sprayer

  5. Steps for cleanout: • Work in a safe area (environment and people). • Hose down inside of tank • Fill tank have full and flush out through the nozzles. • Repeat and include a proper cleaning agent. • Flush final time with clean water.

  6. Steps for cleanout: • Spray and mix/load equipment should be thoroughly rinsed with clean water and the rinsate applied to field (according to label) prior to the cleaning process. • Three primary mechanisms: • Dilution, deactivation, and extraction • Select cleaning agents • Commonly use ammonia (not chlorine bleach) • Commercial tank cleaning agents or common household detergents (liquid or dry)

  7. General cleaning solutions:

  8. Web sites with clean-out information: • http://entweb.clemson.edu/pesticid/saftyed/dptclean.htm • http://www.weeds.iastate.edu/reference/pat30.pdf • http://muextension.missouri.edu/xplor/agguides/crops/g04852.htm • http://www.oznet.ksu.edu/library/ageng2/mf1089.pdf Table 1

More Related