1 / 25

A Breath in an Electronic World:

A Breath in an Electronic World:. Experiments in Musical Expression using a Midi Wind Controller. Matthew Ahrens Mentor: Dr. James Bohn Bridgewater State University. Overview. What is a wind controller? Use as an electronic midi instrument. Sample based synthesis.

aleta
Download Presentation

A Breath in an Electronic World:

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. A Breath in an Electronic World: Experiments in Musical Expression using a Midi Wind Controller Matthew Ahrens Mentor: Dr. James Bohn Bridgewater State University

  2. Overview • What is a wind controller? • Use as an electronic midi instrument. • Sample based synthesis. • Issues with commercially available voices. • Applied Results – composed work • Blend: duet for EWI and Guitar

  3. What is a Wind Controller? • Played like an acoustic wind instrument. • Breath • Keys • Sends midi data to modules. • Modules generate sounds according to midi instructions.

  4. How does it work? • Midi Keyboard vs. Wind Controller.

  5. MIDI Continuous Control #2 Breath • Velocity controls initial volume and timbre. • Breath controls: • Initial and sustained volume (dynamics). • Onset (attack) • Cutoff (Articulation).

  6. Other Midi CC#s • Portamento. • Glide (Glissando). • Hold and Octave (Polyphony). • Pitch Bend

  7. Pitch System • Keyed fingering systems.

  8. Pitch System • Valved fingering system

  9. Systems on a Wind Controller • Differences and similarities to acoustic instruments.

  10. YamahaWX5

  11. EWI4000s

  12. Sound Modules

  13. Sound Modules • Wind Controller • Sends midi messages to the • Sound Module • (Hardware or software) which • Interprets data as instructions to manipulate a • Sample or sound algorithm (additive synthesis). • Sound is then output to a • Speaker or Amplifier

  14. Flow Chart

  15. Samples • Small recorded segments of tone • Manipulated by Module according to midi messages • Example: Nylon Guitar String Sample

  16. Parts of a Sample • Four Basic Parts: • Attack • Resonance • Decay • Cutoff

  17. Triggering Parts of a Sample • CC#2 Breath used to trigger parts on and off. • Breath on sends initial volume and timbre for onset. • Sustained breath value maps to loops resonance part. • Breath off signals decay. • Finalized with cutoff.

  18. Hardware for this Exploration • Roland Fantom-XR • Four different samples uniquely controlled simultaneously • Large variety of effects and timbre controls that can be mapped to wind controller parameters • High quality of sample manipulation and output.

  19. Fantom-XR Images

  20. Fantom-XR Interface Images

  21. Issues with Wind Synthesis Today • Used as an emulation device • Approximately 90% of commercial patches available are emulations (Patchman Music). • The rest are synthetic timbres modeled after steandard electronic voices • E.g. Popcorn.

  22. Issues with Wind Synthesis Today • Acoustic wind instruments: • Multiple timbre across registers. • Expression achieved through techniques • Commercial wind controller voices: • Unmapped expressive controllers (CC#s) • One Sample (single timbre) across eight octave register • Simple changing from velocity driven (keyboards) to breath driven.

  23. Solution with Experimentation • Goal: Create and Use a custom sample that addresses these issues. • Attempt: A voice that used classical and acoustic guitar samples. • Samples were chosen from the Fantom-XR’s built in collection. • Timbres were chosen to blend – or compliment – a classical guitar.

  24. Making the Patch • Samples were cross faded to create artificial registers. • Acoustic guitar sample is only voiced in the classical guitar’s harmonics timbre. • Centroid – jargon term for average brightness of a sound – was used as the determinant for matching the samples. • Result: a voice with a timbre and feel unique to both guitar and wind emulation.

  25. Composition and Recording • Blend: For EWI and Guitar • Cuente el Arroz • Chromatically heavy to show dissonance and resolution between an acoustic instrument and an electronic one. • Interweaving lines to show both parts as supporting to each other. • Ping! • Guitar part only uses natural harmonics. • Shows timbre differences capable with a expressively programmed voice.

More Related