1 / 54

PV System Components

PV System Components. Advanced Electronics Landstown High School STEM & Technology Academy. PV was developed for the space program in the 1960’s. What is a solar cell?. Solid state device that converts solar energy directly into electrical energy Efficiencies from 10%- 80%% No moving parts

Download Presentation

PV System Components

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. PV System Components Advanced Electronics Landstown High School STEM & Technology Academy

  2. PV was developed for the space program in the 1960’s

  3. What is a solar cell? • Solid state device that converts solar energy directly into electrical energy • Efficiencies from 10%- 80%% • No moving parts • No noise • Lifetimes of 20-30 years or more

  4. Cross Section of Solar Cell

  5. How Does It Work? • The junction of dissimilar materials (n (+) and p (-) type silicon) creates a voltage, • Energy from sunlight knocks out electrons, creating a electron, • Connecting both sides to an external circuit causes current to flow, • In essence, sunlight on a solar cell creates a small battery with voltages typically 0.5 volt DC,

  6. Combining Solar Cells • Solar cells can be electrically connected in series (voltages add) or in parallel (currents add) to give any desired voltage and current, • Power (Watts) output is calculated P = I x V • Photovoltaic cells are typically sold in modules (or panels) of 12 volts with power outputs of 50 to 100+ watts. • These are then combined into arrays to give the total desired power or watts.

  7. Cells, Modules, Arrays

  8. Photovoltaic Array for Lighting

  9. Telecommunications Tower

  10. Remote Water Pumping

  11. Solar Lanterns for Landscaping

  12. The PV Market • As prices dropped, PV began to be used for stand-alone home power. • If you didn’t have an existing electrical line close to your property, it was cheaper to have a PV system (including batteries and a backup generator) than to connect to the grid. • As technology advanced, grid-connected PV with net metering became possible.

  13. Other System Components While a major component and cost of a PV system is the array, several other components are typically needed. These include: • The inverter – DC to AC electricity • DC and AC safety switches • Batteries (optional depending on design) • Monitor – (optional but a good idea) • Ordinary electrical meters work as net meters

  14. PV On Homes • PV can be added to existing roofs. • While south tilted exposure is best, flat roofs do very well. • Even east or west facing roofs that do not have steep slopes can work fairly well if you are doing net metering since the summer sun is so much higher and more intense than the winter sun. • The exact performance of any PV system in any orientation is easily predictable.

  15. Photovoltaic Array on Roof and as an Overhang

  16. Other Mounting Systems? • If it is impossible or you don’t want to put a PV system on your existing roof, it is possible to pole mount the arrays somewhere near the house as long as the solar exposure is good. • Pole mounted solar arrays also have the potential to rotate to follow the sun over the day by installing a sun tracking system, • Sun tracking systems can provides a 30% or more boost to the PV system performance.

  17. Pole Mounted PV

  18. Roof Integrated PV • If you are doing new construction or a reroofing job, it is possible to make the roof itself a solar PV collector. • This saves the cost of the roof itself, and offers a more aesthetic design. • The new roof can be shingled or look like metal roofing. A few examples follow.

  19. Solar Roofing Shingles

  20. PV System Battery Sizing Advanced Electronics Landstown High School STEM & Technology Academy

  21. Series & Parallel Circuits

  22. Battery • A combination of two or more cells. • Negative terminal is also called the cathode, Primary cells • Cells that cannot be recharged. • A dry cell; also referred to as a carbon-zinc cell. • Alkaline cell. • Lithium cell.

  23. Secondary cells • Cells that can be recharged. • Lead-acid battery or wet cell. • Nickel-Cadmium cell or Ni-Cad.

  24. Connecting Cells and Batteries • Series • Series-aiding: • IT = I1 = I2(current stays the same), • ET= E1 + E2(voltage is added together)

  25. Parallel • Current expressed as IT = I1 + I2 , Current is added together, • Voltage expressed as ET = E1 = E2, Voltage stays the same,

  26. Connecting batteries • When cells and batteries are wired together in parallel then the amount of current increases, • When cells and batteries are wired together in series then total voltage increases,

  27. Series Circuit When cells and batteries are wired together in series then total voltage increases, but the current stays the same. Series Circuit

  28. Parallel Circuit All the positive terminals are connected together, and all the negative terminals are connected together. The total current (IT) is the sum of the individual current of each cell or battery. 6A 3A 3A

  29. Sizing a PV SystemSolar Panels • Solar modules/panels are typically sold by the peak watt. • That means that when the sun is at its peak intensity (clear day around midday) of 1000 watts per m2, • a solar module/panel rating at say 100 Wp (peak watts) would put out 100 watts of power. • The climate data at a given site summarizes the solar intensity data in terms of peak sun hours, • the effective number of hours that the sun is at that peak intensity on an average day. • If the average peak sun hours is 4.1, it also means that a kw of PV panels will provide 4.1 kw-hr a day.

  30. Sizing and Calculating • To determine the number and size of the batteries we will need, there are some thing we need to determine, • Load (number of kw being used), • Battery capacity, • Location of the panels, • Type of mounting system,

  31. Battery Sizing I • If your load is 10 kw-hr per day, and you want to battery to provide 2.5 days of storage, then it needs to store 25 kw-hr of extractable electrical energy, • Since deep cycle batteries can be discharged up to 80% of capacity without harm, you need a battery with a storage of 25/0.8 = 31.25 kw-hr. • A typical battery at 12 volts and 200 amp-hour capacity stores 2.4 kw-hr of electrical energy. • So how many batteries would you need?

  32. Battery Sizing II To calculate how many batteries: • We use the relationship between battery energy (E) in kw-hr and battery capacity (amp-hr), • E(kw-hr) =capacity(amp-hr) x voltage/1000 • E = 200 amp-hr x 12 volts/1000= 2.4 kw-hr • So for 31.25 kw-hr (2 ½ days) of storage we need 31.25 kw-hr/2.4 kw-hr/battery = 13 batteries • How many batteries would you need for only one day of storage? 13/2.5 = • 5.2 batteries • If we are happy with one half day, • we need only 2 or 3 batteries,

  33. Example • Typically, Landscape lights are rated at 20w, • If we wanted to design a PV system to run these lights for 30 days per charge how many batteries would we need? • 12 volt battery = • E = 200 amp-hr x 12 volts/1000= 2.4 kw-hr • Load = 20w x 30 days = 600w/1000 = .6 kw-hr • .6 kw-hr/2.4 kw-hr = .25 batteries • So how many batteries do we need?

  34. Thinking About Solar Energy • When the sky is clear and it is around midday, the solar intensity is about 1000 watts per m2 or 1 kw/m2, or • In one hour, 1 square meter of the earth’s surface facing the sun will intercept about 1 kw-hr of solar energy, • What you collect depends upon surface orientation and collector efficiency,

  35. Sizing a PV System to Consumption • A PV system can be sized to provide part or all of your electrical consumption. • If you wanted to produce 3600 kw-hr a year at a site that had an average of 4.1 peak sun hours per day, PV Size in KWp = 3600 kw-hr 4.1 kw-hr/day x 365 days/yr x 0.9 x0.98 = 2.7 KWp Note: the 0.9 is the inverter efficiency and the 0.98 represents the loss in the wiring.

  36. Photovoltaic Systems Charge Controllers

  37. Charge controllers manage interactions and energy flows between a PV array, battery bank, and electrical load.

  38. Single-stage battery charging is simpler, but multistage battery charging brings batteries to a higher state of charge.

  39. Charge controllers protect batteries from overcharge by terminating or limiting charging current.

  40. Charge controllers protect batteries from overdischarge by disconnecting loads at low battery voltage.

  41. Most charge controllers include displays or LEDs to indicate battery voltage, state of charge, and/or present operating mode.

  42. Shunt charge controllers regulate charging current by short-circuiting the array.

  43. Series charge controllers regulate charging current by opening the circuit from the array.

  44. Maximum power point tracking manipulates the load or output voltage of an array in order to maintain operation at or near the maximum power point under changing temperature and irradiance conditions.

  45. Diversionary charge controllers regulate charging current by diverting excess power to an auxiliary load when batteries are fully charged.

  46. Controllers designed for hybrid PV systems must manage multiple current sources simultaneously.

  47. Photovoltaic Systems Inverters

More Related