1 / 1

Prepare two blocks (a), approx. ¾”x 3” x 6”.

3/8-16 threaded knob a b Prepare two blocks (a), approx. ¾”x 3” x 6”. Prepare two spacers whose width = width of (a) and length = (length of (a)/2) -width of ruler and thickness = thickness of ruler. At bottom center of one (a), counter bore to accept 3/8” hex nut.

andrew
Download Presentation

Prepare two blocks (a), approx. ¾”x 3” x 6”.

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 3/8-16 threaded knob a b • Prepare two blocks (a), approx. ¾”x 3” x 6”. • Prepare two spacers whose width = width of (a) and length = (length of (a)/2) -width ofruler and thickness = thickness of ruler. • At bottom center of one (a), counter bore to accept 3/8” hex nut. • In same (a), drill 3/8” hole through block. • Epoxy nut in counter bore. • Glue four parts (a) and (b), with ruler in place. • Thread the threaded knob through block to lock ruler / block in place. 48” Ruler Sliding Hook RulerJack A. Loganbill 04/2004

More Related