1 / 14

Solid Solution Strengthening

Solid Solution Strengthening. Line Defects - Dislocations. Line Imperfections in the lattice of a crystalline material. Movement of dislocations => material deformation Interference with movement of dislocations => material strengthened Types: Edge Screw Mixed. Edge Dislocation.

Download Presentation

Solid Solution Strengthening

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Solid Solution Strengthening

  2. Line Defects - Dislocations • Line Imperfections in the lattice of a crystalline material. • Movement of dislocations => material deformation • Interference with movement of dislocations => material strengthened • Types: • Edge • Screw • Mixed Edge Dislocation Screw Dislocation

  3. Slip Impeded by Lattice Imperfections: Point Defects Vacancies Interstitials Substitutional Etc Line type: another dislocation Surface type: Crystal grain boundary Material surface “Preventing” Dislocation Movement

  4. Some Ways to Strengthen a Metal By Disrupting the Crystal Lattice • Alloy: • Solid Solution Strengthening • Dispersion Strengthening • Precipitation Hardening • Heat Treatment: • Controlled heating and cooling of metals for purpose of altering properties • Strain Harden or Cold Work

  5. Edge Dislocation Screw Dislocation Three Basic Types of Lattice Imperfections • Point Defects • Line Defects (Dislocations) • Surface Defects

  6. Strain Hardening • Introduces Line Defects • Varied Strengths • Grain Size Refining • Surface Defects • Varied Strengths • Precipitation Hardening • Two Phase, Coherent • Point and Surface Defects + • High Strengthening Effect • Solid Solution Strengthening • Single Phase • Point Defects • Low Strengthening Effect • Dispersion Strengthening • Two Phase, Non-Coherent • Point and Surface Defect • Medium Strengthening Effect Defects and Strengthening Mechanisms Exceed Solubility Limit

  7. Solid Solution Strengthening • Single Phase • Point Defects • Strengthening Effect Depends on: • Difference in size between solute and solvent atoms • Amount of solute added

  8. Strength Hardness Ductility Electrical Conductivity Creep Resistance Effect of Solid Solution Strengthening on Properties

  9. Formation of a Solid Solution

  10. Strain Hardening • Introduces Line Defects • Varied Strengths • Grain Size Refining • Surface Defects • Varied Strengths • Precipitation Hardening • Two Phase, Coherent • Point and Surface Defects + • High Strengthening Effect • Solid Solution Strengthening • Single Phase • Point Defects • Low Strengthening Effect • Dispersion Strengthening • Two Phase, Non-Coherent • Point and Surface Defect • Medium Strengthening Effect Defects and Strengthening Mechanisms Exceed Solubility Limit

  11. Dispersion Strengthening • Exceeds solubility limit => two solid phases • Matrix • continuous • soft and ductile • Precipitate • discontinuous • strong • round • numerous

  12. Dispersion Strengthening => Non-Coherent Precipitates One solid phase • Non-Coherent • Discontinuous • Only blocks slip if precipitate lies directly in path of dislocation • Does not disrupt surrounding crystal structure Another solid phase Phase boundary = surface defect Blocks slip!

  13. Group Work – Turn in! a b g • Label two phase regions • What are the solid solutions and what are intermetallics? • Three phase reactions • Formation of microstructure of 1% Mg upon cooling • Formation of microstructure of 5% Mg upon cooling • Where do you have solid solution strengthening only? • Where do you have dispersion strengthening? • Generate a plot of strength as a function of composition from 0% Mg to 10% Mg at 300 C and explain this graph in terms of crystalline defects and slip. • What is the amount and composition of phases present at 200 C for 2 % Mg, 4 % Mg, 6% Mg q

  14. Formation of Microstructures • 1% Mg: • All L at 700 C • a starts to form at ~ 650 C • +L at ~640 C • All a at ~625 – 0 C (blue line does • not really cross solvus line) • 5% Mg: • All L at 700 C • a starts to form at ~ 640 C • +L at ~620 C • All a at ~580 C • q starts to form at ~ 240 C • q +L at ~240 – 0 C • Amount and composition • 2% Mg: • Ca = 2% Mg and 100% a • 4% Mg: • Ca = 3% Mg; Cq = 36% Mg • Amount a = 36-4/36-3 * 100 = 97% • Amount q = 4-3/36-3 * 100 = 3% • 6% Mg: • Ca = 3% Mg; Cq = 36% Mg • Amount a = 36-6/36-3 * 100 = 91% • Amount q = 6-3/36-3 * 100 = 9% • **what do you notice about the compositions?** • **what do you notice about the amounts?** Eutectic g+ L a + L b+ L a b g • Solid solutions are a, b, intermetallics are g, q • Three phase reactions, eutectic L => g + q, L => g + b • Where do you have solid solution strengthening only? In single phase regions. • Where do you have dispersion strengthening? In two phase regions. • At 0% Mg we have pure material – no defects to block slip, with increasing amounts of Mg we have solid solution strengthening = point defects to block slip at 5% Mg we exceed the solubility limit and now we have two phases, so we have phase boundaries which are surface defects as well as point defects from the solid solution to block slip, the amount of second phase will increase with increasing Mg so the number of surface defects will also increase = more opportunities to block slip (more obstacles in Goldie’s path!!!!! q s (psi) g + q a + q b + g

More Related