1 / 20

PSAR

PSAR. Experiments with a Medium Size 3-Component Array Marthijn de Kool Geoscience Australia. For the last 2 years, Geoscience Australia has been operating a new array in North-West Australia: PSAR. Primary purpose (funding): Tsunami Warning, influenced site location. 13 3C elements

Download Presentation

PSAR

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. PSAR Experiments with a Medium Size 3-Component Array Marthijn de Kool Geoscience Australia

  2. For the last 2 years, Geoscience Australia has been operating a new array in North-West Australia: PSAR Primary purpose (funding): Tsunami Warning, influenced site location PSAR

  3. 13 3C elements • Aperture ~ 20 km • 3-armed log spiral design • Good signal coherence and slowness accuracy • Main problem: noise PSAR

  4. PSAR is unique: no other medium-size full 3C array in operation (AFAIK). • This allows further investigations. • How useful is it to have 3 components? • What are the best algorithms when using this type of data for monitoring? • This talk concentrates on monitoring applications, not detailed off-line analysis • Most obvious candidate to benefit from horizontals: S detection PSAR

  5. Running a real-time correlation detector over 3c array data • Most obvious algorithm: • When exploring slowness plane, rotate traces for each direction implied by the vector slowness of the point under consideration • Run correlation detector on vertical, transverse and radial components separately • Cons: computationally expensive, false P detections on transverse • Alternative used here: “vector semblance” • “length of vector sum divided by sum of vector lengths” • In practice, use PSAR

  6. FSTAT detector on V and T Vector semblance detector PSAR

  7. Array beam properties and 3-component signal attributes PSAR

  8. Coherence properties of seismic signals observed at PSAR Diagram explained: Run detector For each time slice, rotate traces to V,R,T of detected slowness of maximum coherence Compute correlation coefficient between each pair of array elements after applying time corrections for slowness Take bin average in element separation bins All results for 1-3Hz unless noted Time M=5.7, D=12 deg PSAR

  9. Another example, 20km from previous, M=5.4, different mechanism • Sn more coherent on V (better S/N rel P coda?) • Still very poor on T • Difference in P coherence properties surprising • De-coherence not due to structure under array PSAR

  10. Smaller EQ, m=4.2,D=14 • Weak P coherence • No direct P, scattered coda only? • Good Sn signal/noise • Still poor S coherence • T coherence no better than V Insert slideshow title here <insert/header&footer/footer>

  11. Smaller and closer • (M=3.7, D=6 deg) • Relatively poor P coherence • Sn good coherence on V • Sn low coherence on T PSAR

  12. Subduction earthquake • (depth=40km, D=12 deg) • Pn very coherent • Sn coherence poor (even with good S/N) • Again S coherence better on V than on T PSAR

  13. Frequency dependence • Would expect coherence to be frequency dependent • In cases with good S/N, typically getting similar coherence in S and P requires a frequency ratio of about 3-4 • Same subduction EQ as previous slide PSAR

  14. S correlation comparable or worse on transverse than on vertical at all frequencies PSAR

  15. In many cases S never reaches good coherence (M=5.7, D=13) PSAR

  16. For comparison: Similar plot for NK2013 on KSRS PSAR

  17. Preliminary conclusions: • No problems processing 3C arrays and deriving attributes. “Vector semblance” detector seems to work well • Main problem: S phase signal above 1 Hz only coherent up to a few kilometres at best • There would seem to be little point in using 3C arrays larger than this size • No examples found of significantly better S phase coherence on transverse versus vertical • Caveat: this is only one example site PSAR

  18. Insert slideshow title here <insert/header&footer/footer>

  19. Insert slideshow title here <insert/header&footer/footer>

  20. Phone: +61 2 6249 9111 Web: www.ga.gov.au Email: feedback@ga.gov.au Address:Cnr Jerrabomberra Avenue and Hindmarsh Drive, Symonston ACT 2609 Postal Address: GPO Box 378, Canberra ACT 2601

More Related