Modeling and Simulation RF Systems Training : Tonex Training

1. MODELING SIMULATION AND RF SYSTEMS TRAINING https://www.tonex.com/training-courses/modeling-simulation-rf-systems-training/

2. Modeling and Simulation RF systems Training The Modeling and Simulation RF Systems Training covers principles behind RF System modeling and simulation plus modeling and simulation of Radar, Microwave and Electronic Warfare systems. Learn how to use modeling and simulation to solve complexity in Defense, Aerospace and Commercial Industries. There are numerous design challenges faced by RF system engineer while working on analysis and design. Programs are prone to errors during Requirements and Design Definition phases. Also as designs grow and change, maintaining requirements becomes an uphill task. Model based approach in RF and Radar Engineering has ability to detect defect at much more early stage than conventional methods. Model Based RF and Radar Engineering, using simulation and modeling techniques, includes various logical and physical tools, block diagrams, state machines, mathematical equations, functional flow diagrams, object-oriented models to help to understand various RF and radar subsystems. https://www.tonex.com/training-courses/modeling-simulation-rf-systems-training/

3. Modeling and Simulation RF systems Training • Who Should Attend: • Engineers • Technicians • Analysts • Managers • scientists and developers ( who work with RF, satellite, microwave and radar systems ) https://www.tonex.com/training-courses/modeling-simulation-rf-systems-training/

4. Modeling and Simulation RF systems Training • Learning Objectives • Upon completion of the Modeling and Simulation RF Systems Training, the attendees will be able to: • Explain the basic principles behind RF, Radar, Microwave and satellite technologies • Discuss the key principles behind RF, Radar, Microwave and satellite communications • Describe key features of RF, Radar, Microwave and satellite communications principles, analysis, design and engineering of communications subsystems • Illustrate the functional architecture of RF, Radar, Microwave and satellite • Summarize the basics of RF, Radar, Microwave and satellite communications design and engineering principles • Discuss systems engineering principles &methods applied to RF, Radar, Microwave & Satellite communications • Compare different design tools, techniques, models and principles applied to RF, Radar, Microwave and Satellite communications analysis, high and low level design, verification and validations and operations • Explain the key satellite communication principles such as frequency spectrumand more https://www.tonex.com/training-courses/modeling-simulation-rf-systems-training/

5. Modeling and Simulation RF systems Training • Course Content: • Introduction to Modeling and Simulating RF and Radar Systems • Introduction to Modeling and Simulating RF Propagation and Performance • Steps in RF and Radar Modeling, Simulation, and Systems Engineering • RF Propagation Modeling and Simulation Tools for Various Environments • Applied Radio Frequency(RF) Modeling & Simulation (Workshops and hands-on activities) • Materials https://www.tonex.com/training-courses/modeling-simulation-rf-systems-training/

6. Modeling and Simulation RF systems Training • Introduction to Modeling and Simulating RF and Radar Systems: • Modeling & simulation fundamentals • Review of RF, radar, Microwave and Satellite Communications fundamentals • Basic modeling and Simulation Principles • Modeling the radar • Modeling radar functions • Modeling & simulation RF and Radar applications • RF and Radar Modeling & simulation methodologies and techniques https://www.tonex.com/training-courses/modeling-simulation-rf-systems-training/

7. Modeling and Simulation RF systems Training • Introduction to Modeling and Simulating RF Propagation and Performance : • RF Propagation  fundamentals • Review of RF Link Budget fundamentals • Overview of RF Link Budget modeling and Simulation • Modeling the Link Budget • Modeling RF Propagation • Modeling & simulation RF Performance • RF Link Budget Optimization methodologies and techniques • Modeling and Simulation of Antennas https://www.tonex.com/training-courses/modeling-simulation-rf-systems-training/

8. Modeling and Simulation RF systems Training • Steps in RF and Radar Modeling, Simulation, and Systems Engineering: • Modeling and simulation systems platform: hardware, systems software • Development steps • Model-based RF and Radar engineering • Controls development cycle • Design validation using detailed performance model • Validation and verification • Performance against initial specs • Software verification • Diagnostics and system self-test • System level logic, mode change https://www.tonex.com/training-courses/modeling-simulation-rf-systems-training/

9. Modeling and Simulation RF systems Training • RF Propagation Modeling and Simulation Tools for Various Environments: • Introduction to Wireless Propagation • Wireless Propagation Basics • Link Budgets • RF Propagation Modeling and Simulation Tool for Highly Cluttered Environments • Modeling the Wireless • Propagation Channel • RF propagation Modeling and Simulation • Frequency selective channels • The Fading Channel • RF Propagation Simulators • Propagation and Fading Simulations • Coverage and Interference & Noise • Jamming models • Generating Realistic Series with Path Loss and Shadowing • Direct Signal, Angle of Arrival and Doppler Shift • Direct and Reflected Signals • Two Scatterers & Multiple Scatterers • Standing Wave due to Multipath • Quasi-standing Wave and more https://www.tonex.com/training-courses/modeling-simulation-rf-systems-training/

10. Modeling and Simulation RF systems Training • Applied Radio Frequency(RF) Modeling & Simulation (Workshops and hands-on activities): • RF modeling and simulation from the 20 KHz to the 300 GHz frequency bands • Design, modeling, build-out, and optimization of wireless systems • Modeling and simulation solutions for the computation of path loss, coverage analysis, noise, noise figure, and effective jamming (C/I) interference • Perform “what-if” analysis using real time measurements to optimize and increase prediction efficiency • Modeling and simulation of antenna, amplifiers, mixers, S-parameter blocks, and other blocks for designing architectures for wireless transmitters and receivers in communications and RF and radar systems • Simulate the system-level behavior of the RF front end together with standard signals, digital signal processing algorithms, and control logic. • Simulate mixers to predict image rejection, reciprocal mixing, local oscillator phase offsets, and DC conversion • Simulate frequency-dependent impedance mismatches between linear and nonlinear components in the time and frequency domains. https://www.tonex.com/training-courses/modeling-simulation-rf-systems-training/

11. Modeling and Simulation RF systems Training • Materials: • Course Notebook and soft copies of the presentation slides, job aids and other reading material • RF and Radar MATLAB and Simulink example programs • MATLAB and Simulink example programs https://www.tonex.com/training-courses/modeling-simulation-rf-systems-training/

12. MODELING SIMULATION AND RF SYSTEMS TRAINING VISIT TONEX.COM https://www.tonex.com/training-courses/modeling-simulation-rf-systems-training/

13. MODELING SIMULATION AND RF SYSTEMS TRAINING VISIT TONEX.COM https://www.tonex.com/training-courses/modeling-simulation-rf-systems-training/

14. Why Tonex? • Tonex has been documenting the cybercrime evolution for 25 years when it first began training organizations on how to better deflect contemporary cyberattack. • Our Cybersecurity training courses and seminars are continuously updated so that they reflect the latest industry trends, and they are also created by specialists in the industry who are familiar with the market climate. • So far we have helped over 20,000 developers in over 50 countries stay up to date with cutting edge information from our training categories. • We’re Different because we take into account your workforce’s special learning requirements. In other words, we personalize our training – Tonex has never been and will never be a “one size fits all” learning program. • Ratings tabulated from student feedback post-course evaluations show an amazing 98 percent satisfaction score. Contact Tonex for more information, questions, comments.

15. https://www.tonex.com/