1 / 29

1-877-QUANICS

1-877-QUANICS. www. qaunics .net. Single Container Advanced Treatment. Effluent Path. Applications. Single Family Residential Commercial Cluster/Community Sensitive Environments. Single Family Residential. Commercial. Cluster Community. Sensitive Environment.

candida
Download Presentation

1-877-QUANICS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 1-877-QUANICS www.qaunics.net

  2. Single Container Advanced Treatment

  3. Effluent Path

  4. Applications • Single Family Residential • Commercial • Cluster/Community • Sensitive Environments

  5. Single Family Residential

  6. Commercial

  7. Cluster Community

  8. Sensitive Environment Actual effluent sample from NSF testing facility

  9. Installation

  10. Pre-Treatment Install the Zabel A300 Series Filter in the septic tank.

  11. Access System Install Quanics Access Systems

  12. STEP System Install the Quanics Filtered Pump Vault and STEP package

  13. Treatment Module Place the module on a level site. Aerocell can be carried into place. Bio-COIR must be moved with heavy equipment. Pre-plumbed pipes are attached with unions. The air vent is glued on.

  14. Treatment Module Connect piping

  15. Recirculation Adjust the recirculation device and cover it up. After the effluent works its way through the SCAT system, it will go to the Recirculation Device. Adjust all the outlet openings by turning them so the levels are all equal. This is how you get the 80% back to the tank and the 20% to the drainfield.

  16. Operation Fill the septic tank and turn the pump on. Then set the pressure at the spray nozzles from 5-8 psi. Set timer to design dose

  17. Septic Tank Effluent Filter Dosing system Treatment Module Recirculation Device Dispersal System Maintenance (at six month intervals)

  18. The tank should be inspected for excessive scum and solids build-up. Determine the pumping frequency. Homeowners should be encouraged not to use excessive amounts of cleaners. Also, limit non-biodegradable materials such as grease, garbage disposal, personal hygiene products, chemicals, diapers, etc. Septic Tank

  19. Inspect the septic tank effluent filter and clean as needed. Remove the filter plates on the pump vault and clean as needed. Installation and maintenance directions are included with the filter and pump vault. Effluent Filter and Pump Vault

  20. Inspect wiring connections and control panel for proper operation. Correct as needed. Inspect floats for proper placement and make sure they are not tangled. Activate the pump through the panel or manually trip the floats to test for proper pump operation. Activate the alarm system to verify proper operation. Dosing Systems

  21. A gray biomat on the media should be present and is normal. An excessive accumulation of solids may indicate that the septic tank is functioning poorly. If necessary, remove the upper layers of media and clean them by squeezing or rinsing. If you replace media, make sure it is compacted below the spray nozzles. Remove the spray nozzles by unclipping the clamp from the pipe. Clean of any debris and replace. Treatment Modules

  22. If the recirculation system includes a pump, activate and check for proper operation. If the recirculation is by gravity, check by observing the discharge rates and adjust, if necessary by leveling. Recirculation Devices

  23. If monitoring ports are installed, check the trenches for excessive ponding. Ponding may indicate poor soil, excessive water use or a timer that is not set properly. Inspect the overall system for signs of seepages or excessive vegetative growth. Determine the cause and make corrections. Dispersal Systems

  24. Proper installation Completed installation checklist Completed operation checklist Your Responsibility to Dealer

  25. Proper use of Quanics products Proper installation of the system Your Responsibility to Quanics

  26. Proper training Warranty support Promoting your professionalism Quanics Responsibility to You

  27. 1-877-QUANICS www.qaunics.net

More Related