1 / 10

TRIGGERING OF FLIP-FLOPS

TRIGGERING OF FLIP-FLOPS FLIP - FLOPS CHANGE STATE ONLY WHEN A CLOCK SIGNAL IS PRESENT. CLOCK SIGNAL IS NOT NECESSARILY INSTANTANEOUS SO THERE NEEDS TO BE A WAY TO PREVENT THE FLIP-FLOP FROM CHANGING STATE MULTIPLE TIMES DURING A CLOCK CYCLE. 2 WAYS TO ACHIEVE THIS :

Download Presentation

TRIGGERING OF FLIP-FLOPS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. TRIGGERING OF FLIP-FLOPS • FLIP - FLOPS CHANGE STATE ONLY WHEN A CLOCK SIGNAL IS PRESENT. • CLOCK SIGNAL IS NOT NECESSARILY INSTANTANEOUS SO THERE NEEDS TO BE A WAY TO PREVENT THE FLIP-FLOP FROM CHANGING STATE MULTIPLE TIMES DURING A CLOCK CYCLE. • 2 WAYS TO ACHIEVE THIS : • ONLY CHANGE STATE ONCE THE CLOCK CYCLE IS FINISHED. THIS TYPE OF FLIP-FLOP IS CALLED A MASTER – SLAVE FLIP-FLOP. • ONLY TRIGGERS DURING A SIGNAL TRANSITION. THIS TYPE IS CALLED AN EDGE - TRIGGERED FLIP-FLOP.

  2. Master Slave S Q R Q’ S Q R Q’ SCR Q Q’ MASTER - SLAVE FLIP - FLOPS • A pulse-triggered flip-flop consists of two latches, one acts as a master and the other acts as a slave. • Master-slave flip-flop allows one flip-flop to change state as the clock pulse is active. • Output from one flip-flop goes into another flip-flop, which is attached to an inverted clock input. State of the first flip-flop settles by the time its output changes the state of the second flip-flop after the clock pulse has finished and stable output is achieved. MASTER LATCH WORKS WHEN C = 1 SLAVE LATCH WORKS WHEN C = 0

  3. RS MASTER - SLAVE FLIP - FLOPS MASTER SLAVE RS FLIP-FLOP IS ONLY USED IN APPLICATIONS WHERE IT IS GUARANTEED THAT BOTH R AND S CANNOT BE LOGIC 1 AT THE SAME TIME.

  4. JK MASTER - SLAVE FLIP - FLOPS MASTER SLAVE AS BEHAVIOR OF JK FLIP-FLOP IS COMPLETELY PREDICTABLE UNDER ALL CONDITIONS,SO IT IS PREFERRED TYPE OF FLIP-FLOP FOR MOST LOGIC CIRCUIT DESIGNS.

  5. EDGE TRIGGERED FLIP - FLOPS • AN EDGE - TRIGGERED FLIP - FLOP IS A BISTABLE DEVICE WHOSE STATE DEPENDS ON THE SYNCHRONOUS INPUTS EITHER AT THE POSITIVE EDGE OR AT THE NEGATIVE EDGE OF A CLOCK PULSE. • EDGE TRIGGERED FLIP – FLOPS TRIGGER ONLY WHEN THE PULSE IS IN TRANSITION. • SOME TRIGGER DURING A POSITIVE TRANSITION ( 0 – TO - 1) CALLED POSITIVE EDGE TRIGGERED FLIP - FLOPS. OTHERS TRIGGER DURING A NEGATIVE TRANSITION ( 1 – TO – 0 ) CALLED NEGATIVE EDGE TRIGGERED FLIP - FLOPS.

  6. POSITIVE EDGE - TRIGGERED D FLIP - FLOP S Q CLK Q R D

  7. D FLIP - FLOP USING NOR LATCHES

  8. J Q CLK Q K POSITIVE EDGE - TRIGGERED JK FLIP - FLOP

  9. SUMMARY FLIP FLOPS CHARACTERISTICS TABLES & EXCITATION TABLES SR JK

  10. SUMMARY FLIP FLOPS CHARACTERISTICS TABLES & EXCITATION TABLES D T

More Related