1 / 62

Practical Experiences in Applying Savings M&V

Practical Experiences in Applying Savings M&V. By Thomas K. Dreessen CEO, EPS Capital Corp. EVO Board Member and Pierre Langlois President, Econoler International EVO Board member October 19, 2005. Program. 13:00-13:10 Introduction 13:10-13:25 Presentation of EVO

cooper
Download Presentation

Practical Experiences in Applying Savings M&V

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Practical Experiences in Applying Savings M&V By Thomas K. Dreessen CEO, EPS Capital Corp. EVO Board Member and Pierre Langlois President, Econoler International EVO Board member October 19, 2005

  2. Program 13:00-13:10 Introduction 13:10-13:25 Presentation of EVO 13:25-14:00 Overview of the International Performance Measurement & Verification Protocol (IPMVP) 14:00-14:45 How to apply IPMVP’s Options in practical ways 14:45-15:00 Break 15:00-15:45 ESCO Strategies for Valuing Savings and Mitigating Related Performance Risks 15:45-17:00 Actual Project Examples in Applying Savings M&V 17:00-17:30 Q&A and Conclusion

  3. Introduction Your Trainers: • Tom Dreessen CEO, EPC Capital Corp. www.epscapital.com • Pierre Langlois President, Econoler International www.econolerint.com

  4. Introduction Why Measure and Verify? • Accurately assess energy savings for a project • Allocate risks to the appropriate parties • Reduce uncertainties to reasonable levels • Monitor equipment performance • Find additional savings • Improve operations and maintenance (O&M) • Verify cost savings guarantee is met • Allow for future adjustments, as needed

  5. Introduction • M&V is an evolving science, although common practices exist • These practices are documented in several guidelines, including • The International Performance Measurement & Verification Protocol (IPMVP 2001) • FEMP M&V Guidelines: Measurement and Verification for Federal Energy Projects Version 2.2 (2000) • ASHRAE Guideline 14: Measurement of Energy and Demand Savings (2002)

  6. EVO • Efficiency Value Organization (EVO) www.efficiencyvaluation.org • Formed in 2004, formerly IPMVP Inc, a non-profit US corporation • Provides tools to help energy efficiency projects be valued equivalently to new energy supply projects

  7. EVO • EVO Vision A global marketplace that correctly values the efficient use of natural resources and utilizes end-use efficiency options as a viable alternative to supply options • EVO Mission To develop and promote the use of standardized protocols, methods and tools to quantify and manage the performance risks and benefits associated with end-use energy efficiency, renewable energy, and water efficiency business transactions

  8. EVO • Protocols • Industry Standards • Training, Certification • Under development • Building Community, Promoting Efficiency • USGBC - US Green Building Council - LEED • Metering International • Power Measurement - Webinars • APEC - IEEFP • Coming soon - EVO subscriber services

  9. IPMVP - Overview • IPMVP stands for International Performance M&V Protocol • Created by an international committee seeking to reduce uncertainty in M&V • Developed and managed by EVO, inc. available free www.ipmvp.org

  10. IPMVP - Overview • IPMVP is a framework of definitions and methods for assessing energy savings. • IPMVP framework was designed to allow users to develop an M&V plan for a specific project. • IPMVP was written to allow maximum flexibility in creating M&V plans that meet the needs of individual projects, but also adhere to the principles of accuracy, transparency and repeatability.

  11. IPMVP - Benefits • Defines standard approaches to “measuring savings” to reassure clients • Leads clients and ESCOs to discuss the trade-off between measurement “accuracy” and measurement cost • Legitimized ESCO projects though International recognition • Updates M&V state of the art practices through constant evolution

  12. IPMVP What IPMVP does not cover • Operations and Maintenance • Detailed Metering Specifications, or instrumentation guidance. • Calculating the Cost of M&V (Balancing the cost and benefits) • Scientific/Engineering Rationale for adjusting the baseline for non-statistical changes

  13. IPMVP – Added Value • Savings verification framework for commercial and industrial energy conservation measures • Standardizes M&V terminology and defines various M&V options • Risk management tool that allocates risks between buyer and seller of energy services • Allows parties to create transparent, repeatable contract terms governing savings settlement

  14. IPMVP – Other Characteristics • Translated in more than 10 languages over the last five years • First Published 1996, and updated frequently • Broad International Support and Adoption • World standard

  15. IPMVP - Documents • IPMVP Vol. I —Concepts and Options for Determining Energy Savings. • IPMVP Vol. II — Concepts and Practices for Improved Indoor Environmental Quality • IPMVP Vol. III • M&V Guidelines for New Construction (under development) • M&V of Renewable Energy Systems • Standard Protocol for Determining Baseline for Demand Response Programs (Draft) • Emissions Reduction

  16. IPMVP – M&V Options • The IPMVP M&V guidelines group M&V methodologies into four categories : Options A, B, C, and D • The options are generic M&V approaches for energy and water saving projects. • Having four options provides a range of approaches to determine energy savings depending on the characteristics of the ECMs being implemented and balancing accuracy in energy savings estimates with the cost of conducting M&V.

  17. IPMVP – M&V Options Type #1 Retrofit isolation and whole facility Looks only at the affected equipment or system independent of the rest of the facility; whole-facility methods consider the total energy use while ignoring specific equipment performance. • OPTION A - Retrofit isolation with measured performance and stipulated operation • OPTION B - Retrofit isolation with measured performance and measured operation

  18. IPMVP – M&V Options Type # 2 : Whole-facility method Looks globally at the savings of a whole facility • OPTION C - Whole building or utility bill comparison • OPTION D - Calibrated simulation (using simulation tools as Trace, DOE-2, etc.)

  19. IPMVP – M&V Options

  20. M&V Options - Practical Application Regardless of the Option followed, similar steps are taken to verify the potential for the installed Energy Conservation Measures (ECMs) to achieve savings • Step 1: Define the baseline conditions were accurately defined. • Step 2: Develop Project Specific Measurement & Verification Plan • Step 3: Verify the proper equipment/systems were installed and are performing to specification. • Step 4: Verify the equipment/systems continue to have the potential to achieve the predicted savings.

  21. Basics of M&V WWHH Baseline Savings Energy Post-Retrofit Time

  22. Basics of M&V WWHH? Savings Baseline Energy Post-Retrofit Time

  23. M&V Options - Practical Application Step 1 Define the Baseline • Baseline are define as part of the detailed energy survey (DES) • Baseline physical conditions (such as equipment inventory and conditions, occupancy, nameplate data, energy consumption rate, control strategies, and so on) are typically determined during the DES through surveys, inspections, spot measurements, and short term metering activities • Deciding what needs to be monitored, and for how long, depends on factors such as the complexity of the measure and the stability of the baseline, including the variability of equipment loads and operating hours, and the other variables that affect the load

  24. M&V Options - Practical Application Step 1 Define the Baseline (continued) • Baseline data are used to account for any changes that may occur during the performance period, which may require baseline energy use adjustments • In almost all cases, after the measure has been installed, one cannot go back and re-evaluate the baseline. It no longer exists! It is very important to properly define and document the baseline conditions before the measure is implemented.

  25. M&V Options - Practical Application Step 2 Develop Project Specific M&V Plan The project specific M&V plan includes project-wide items as well as details for each ECM, including: • Details of baseline conditions and data collected • Documentation of all assumptions and sources of data • What will be verified • Who will conduct the M&V activities • Schedule for all M&V activities

  26. M&V Options - Practical Application Step 2 Develop Project Specific M&V Plan (continued) The project specific M&V plan includes project-wide items as well as details for each ECM, including: • Details of engineering analysis performed • How energy savings will be calculated • Utility rates and how they will be used to calculate cost savings • Detail any operations & maintenance (O&M) cost savings claimed • Define O&M reporting responsibilities • Define content and format of all M&V reports (Post-Installation, Commissioning, and periodic M&V) • How & why the baseline may be adjusted

  27. M&V Options - Practical Application Step 3: Verify the proper equipment/ systems were installed and are performing to specification. • Post-installation verification is conducted to ensure that proper equipment/systems were installed, are operating correctly, and have the potential to generate the predicted savings • The verification is accomplished through commissioning and M&V activities • Commissioning of installed equipment and systems is required • Commissioning assures that the building systems perform according to the design intent.

  28. M&V Options - Practical Application Step 3: Verify the proper equipment/ systems were installed and are performing to specification. • After commissioning is completed, the post-installation measurement and verification activities specified in the M&V plan are implemented • Verification methods may include surveys, inspections, spot measurements, and short-term metering • The results of the commissioning and M&V activities are presented in a Post-Installation M&V Report

  29. M&V Options - Practical Application Step 4: Regular-Interval Verification During the Performance Period • Verify that the installed equipment/systems have been properly maintained, continue to operate correctly, and continue to have the potential to generate the predicted savings • Frequent verification activities can be appropriate. This ensures that the M&V monitoring and reporting systems are working properly, it allows fine-tuning of measures throughout the year based on operational feedback, and it avoids surprises at the end of the year

  30. M&V Options - Practical Application Higher precision means higher cost • Sampling Large quantity of equipment to measure means higher cost • Approach Measuring power and hours of operation need better equipment • Frequency Checking the savings monthly implies added cost

  31. M&V Options - Practical Application Savings Monthly check Cost of M&V/Savings Simple 1 time check M&V cost Complexity of the process

  32. ESCO Strategies - Valuing Savings & Mitigating Related Performance Risks • The primary purposes of M&V is to reduce performance risk to an acceptable level, which is a subjective judgment based on the parties’ priorities and preferences. • In performance contracts, risks are allocated between the ESCO, Owner & Financier. • In performance contracts, M&V: • is critical to success of project • maximizes the persistence of savings over contract term • verifies the savings achieved and valued in contracts

  33. ESCO Strategies - Valuing Savings & Mitigating Related Performance Risks • The right level of M&V is determined by degree of savings certainty: • Projects with high degree of certainty require minimal M&V • Projects with low degree of certainty require more M&V • Factors that affect cost and level of M&V: • Value and level of uncertainty of estimated savings • Complexity of efficiency equipment installed • Amount and value of equipment installed • Number of interactive effects • Availability and capability of an existing controls system

  34. ESCO Strategies - Valuing Savings & Mitigating Related Performance Risks • Typical M&V procedures for an ESCO contract are: • Define general M&V approach for inclusion in the contract • Define site-specific M&V plan for project being installed • Define pre-installation baseline energy • Define post-installation system and use • Conduct M&V activities as set forth in contract • Calculate energy & operating savings over term of the contract • Calculate dollar savings and payments due to ESCO

  35. ESCO Strategies - Valuing Savings & Mitigating Related Performance Risks • Calculating Energy Savings: Baseline energy use - Post-installation energy use = Energy savings • Baseline represents level of energy that would have been used if new equipment had not been installed - can be affected by a variety of factors: • Changes in building equipment, schedule, occupancy, operations or maintenance procedures, etc. • Unusually mild or severe winter

  36. ESCO Strategies - Valuing Savings & Mitigating Related Performance Risks • The ESCO “Performance Risk” equates to a Savings Guarantee to Owner or Financier that the total cost to implement the project will be “paid-from savings”. • Key areas of the Performance Risk are: • Savings shortfall • Savings persistence • Technical problems • Customer performance (data, maintenance, payment, etc.)

  37. ESCO Strategies - Valuing Savings & Mitigating Related Performance Risks Possible Solutions: • Savings shortfall • Utilize multi-level savings estimate review process • Fix long-term maintenance, M&V and other ESCO costs • Savings Persistence: • Establish calculation methodology during feasibility stage • Implement M&V plan at beginning of construction • Isolate Savings Measures from total bill

  38. ESCO Strategies - Valuing Savings & Mitigating Related Performance Risks Possible Solutions (continued): • Technical Problems: • Ensure proper pass-through to contractors and vendors • Customer Risk – include in contract: • Clearly defined baseline, savings calculation methods, M&V protocol, and maintenance responsibilities • Short timeline for providing energy bills • ESCO’s ability to bill estimated savings if bills not provided • ESCO’s ability to self-perform maintenance and charge owner for work and any related lost savings

  39. Actual M&V Project – Commercial Building in Canada – Econoler International • Training and energy management were also part of the project.

  40. Actual M&V Project – Commercial Building in Canada – Econoler International • Project implemented in 2000 • Annual use of the building constant for the baseline duration and for the duration of the project • The energy bill of year 1999 $2.5 million • The energy bill of year 2001 $1.9 million • Savings $0.6 million

  41. Actual M&V Project – Commercial Building in Canada – Econoler International M&V Approach (OPTION C) • Whole building/plant approach using main electric utility meter data • Measurement done based on the baseline developed

  42. Actual M&V Project – Commercial Building in Canada – Econoler International This approach is appropriate: • Large-scale project • Important energy saving (20% or more) • All parameters affecting energy usage can be clearly identified (baseline and after implementation) • Adjustments factors are simple • Individual measurement not required • Soft savings measures included (training, awareness)

  43. Actual M&V Project – Commercial Building in Canada – Econoler International Advantages of using OPTION C • The entire installation • Interactive effects between EE measures Disadvantages of using OPTION C • More expensive than option A or B because based on monthly calculation

  44. Actual M&V Project – Commercial Building in Canada – Econoler International Accuracy/Cost: • % of project cost: 5-15% • Accuracy: ± 5-10% (annual) • Accuracy: ± 20% (monthly)

  45. Actual M&V Project – Hospitalin USA - EPS Capital Corp.

  46. Actual M&V Project – Hospitalin USA - EPS Capital Corp. M&V Approach = OPTION “A” • Actual Before/After Measurements at Installation • Stipulated Usage Factors

  47. Actual M&V Project – Hospitalin USA - EPS Capital Corp.

  48. Actual M&V Project – Hospitalin USA - EPS Capital Corp. Appropriateness of M&V Approach: • Large facility with continuous variable conditions • Actual Before/After Measurements verify savings • Control system in place verified stipulated usage • On-going measurement not required – verified equipment in place and operating. • High-level reconciliation to utility and system usage

  49. Actual M&V Project – Hospitalin USA - EPS Capital Corp. Advantages of using Option A: • Cost effective for hospital variables • Actual savings verified with statistically valid samples • Easy to administer Disadvantages of using Option A: • Not 100% accurate • Not reconciled to total utility usage • Does not track on-going facility changes

  50. Actual M&V Project – Textile Millin India - EPS Capital Corp

More Related