1 / 1

Risks

Risks. Risk 1: The Align er cannot handle the load Solution: The current actuators operate with a factor of safety of 10. Risk 2: The Aligne r moves packages in such a manner that the motion is uncontrolled

daryl
Download Presentation

Risks

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Risks • Risk 1: TheAligner cannot handle the load • Solution: The current actuators operate with a factor of safety of 10. • Risk 2: TheAligner moves packages in such a manner that the motion is uncontrolled • Solution: Control the actuation rate such that is fast/slow enough that a minimal force is applied to the package, but product is aligned at a sufficient rate to have desired flow rate. • Risk 3: Product aligning improperly • Solution: Actuator control devices will minimize the risk of over or under pushing product. • Risk 4: Jamming of product • Solution: An emergency stop will evacuate air from the system, allowing thealignerto beretracted byhand. • Risk 5: Air pressure is lost and aligning process is delayed • Solution: The emergency relief system will allow aligner to return to its retracted position and the product can be aligned with manual assistance. • Risk 6: Pinch points regarding moving parts • Solution: Protective covers in place over all moving components. The emergency relief system will allow aligner to be stopped immediately should a pinch occur. • Risk 7: Aligner system is not serviceable • Solution: Standard parts and components have been specified from preferred suppliers and the assembly has been designed an a manner that allow maintenance easy access to system.

More Related