1 / 13

HOW TO MAKE A BOW

HOW TO MAKE A BOW. BY: REBECCA F. FLORAL DESIGN -3 RD BLOCK 2004 Revised by Robbie Buchanan May 2007. TOOLS YOU NEED:. FLORAL WIRE TAPE. FLORAL WIRE. RIBBON SIZE SELECTIONS.

dasha
Download Presentation

HOW TO MAKE A BOW

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. HOW TO MAKE A BOW BY: REBECCA F. FLORAL DESIGN -3RD BLOCK 2004 Revised by Robbie Buchanan May 2007

  2. TOOLS YOU NEED: FLORAL WIRE TAPE FLORAL WIRE RIBBON SIZE SELECTIONS # 3 # 9 # 40

  3. STEP 1: • CUT OFF A STRIP OF TAPE – APROX. 6 In. LONG • STRETCH OUT TAPE TO FULL LENGTH (Un-stretched tape) (Stretched tape)

  4. STEP 2 • ATTACH TAPE TO WIRE AT ABOUT A 20 DEGREE ANGLE

  5. STEP 3 • HOLD BETWEEN POINTER FINGER AND THUMB

  6. STEP 4 • SLOWLY TWIST WIRE IN YOUR FINGERS WHILE PULLING DOWN ON THE TAPE -MAKE SURE THAT YOUR WIRE IS TIGHTLY WRAPPED.

  7. STEP 5 • STARTING WITH YOUR RIBBON, NOTICE THAT THERE ARE 2 SIDES – SHINY AND DULL. (SHINY SIDE) (DULL SIDE)

  8. STEP 6 • BEGIN WITH YOUR CHOICE OF RIBBON • FOLD OVER KEEPING SHINY SIDE TOWARDS YOU. • TWIST USING MOTION SHOWN.

  9. STEP 7 • CONTINUE WITH A SECOND LOOP ON THE OPPOSITE SIDE. ALWAYS MAKING SURE THAT THE SHINY SIDE IS TOWARDS YOU.

  10. STEP 8 • CONTINUE THESE STEPS MAKING APROX. 4-5 LOOPS ON EACH SIDE.

  11. STEP 9 • AFTER MAKING TAILS FOR YOUR BOW PLACE YOUR WIRE UP THROUGH YOUR FINGERS BETWEEN

  12. STEP 10 • AFTER PLACING YOUR WIRE PROPERLY, GRAB A HOLD OF YOUR WIRES AND TWIST THE BOW NOT THE WIRE.

  13. STEP 11 • AFTER Tightening the WIRE, ADJUST YOUR LOOPS AND YOUR BOW IS DONE!

More Related