1 / 31

TOUCH SCREEN TECHNOLOGY

TOUCH SCREEN TECHNOLOGY. PRESENTED BY Pr iya Mishra Saroj Singh Shikha Ghodeshwar. INTRODUCTION. Works with the principle of CRT (Cathode Ray Tube) technology. Input device --> Operates a PC by simply touching the display screen.

diza
Download Presentation

TOUCH SCREEN TECHNOLOGY

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. TOUCH SCREEN TECHNOLOGY PRESENTED BY PriyaMishra Saroj Singh ShikhaGhodeshwar

  2. INTRODUCTION • Works with the principle of CRT (Cathode Ray Tube) technology. • Input device --> Operates a PC by simply touching the display screen. • Made of sensitive glass overlay & desired inputs can be given by touching it. • Inputs --> External (light pen) or an internal device (touch overlay and controller) .

  3. COMPONENTS OF TOUCH SCREEN • Three major components viz, • Touch sensor • Controller • Software driver

  4. TOUCH SENSORS • Touch sensor Covering screen

  5. Contd.. • Touch sensor --> In between clear glass panels. • Responsive area --> Entire viewable area of the display screen. • Sensors --> Detects electrical current or signal. • Touching -->causes a voltage or signal change, thereby the location can be determined.

  6. CONTROLLER

  7. CONTD… • PC card --> Touch sensor and the PC. • Change in voltage --> Translated into the information that CPU understands. • Translated bits --> Position where the touch occurs. • Processor --> change the screen accordingly.

  8. SOFTWARE DRIVER • Acts as a bridge --> Screen and processor. • Makes the operating system --> To interpret the touch event information. • Touch screen drivers today --> Mouse-emulation type driver ( like touching the screen the same as clicking mouse) • Recent research --> To make it as PNP

  9. TYPES OF TOUCH SCREEN • Resistive Touch screen • Surface wave Touch screen • Capacitive Touch screen • Surface capacitive • Projected capacitive • Infrared Touch screen

  10. RESISTIVE TOUCH SCREENS

  11. RESISTIVE TOUCH SCREEN

  12. CONTD… • 1. Polyester Film. • 2. Top Resistive Layer. • 3. Conductive Transparent Metal Coating. • 4. Bottom Resistive Layer . • 5. Insulating Dots . • 6. Glass Substrate

  13. WORKING OF RESISTIVE SENSORS • Resistive touch screen monitor composed of : • Flexible top layer • Rigid bottom layer • Insulating dots • Along with touch screen controller. • Top & Bottom layers --> transparent metal oxide coating. • Pressure over the flexible top sheet --> Makes electrical contact between the resistive layers & the switch closing in the circuit. • Controller --> Alternating voltages & converts them into the digital X and Y coordinates.

  14. CONTROLLER • NAME: • VS20UA CONTROLLER • Supply Voltage • 5.0V  DC • Maximum Current • 20mA • Resolution • 12-bit

  15. PROPERTIES • 2 conductive layers that connects when touched. • Capable of multi touch. • Not affected by dirt or dust. • Good for outdoor use.

  16. SURFACE WAVE TOUCH SCREEN

  17. SURFACE WAVE TOUCH SCREEN

  18. WORKING OF SURFACE WAVE SENSORS • Contains Transmitting and receiving transducers • Touchscreen controller --> 5 MHz electrical signal to the transmitting transducer. • Converts electrical signal --> ultrasonic waves within the glass. • Waves --> Directed across the front surface of screen. • Reflectors - -> Reflects & directs towards receiving transducer. • Receiving transducer --> reconverts --> An electrical signal & digitally maps the touchscreen

  19. CONTROLLER • NAME: • 2701RSU CONTROLLER • Voltage • +5 VDC • Baud Rate • 9600 • Touch Resolution • 12bit, size independent • Conversion Time • 10 ms per coordinate set

  20. CAPACITIVE TOUCHSCREEN

  21. CAPACITIVE TOUCHSCREEN

  22. WORKING OF CAPACITIVE TOUCHSCREEN • Uniform conductive coating on a glass panel. • Operation --> Electrodes around the panel's edge evenly distribute a low voltage across the conductive layer & creates an uniform electric field. • Finger touch --> Draws current from each corner. • Controller --> Measures ratio of the current flow from the corners & calculates the touch location. • Capacitance --> Finger and the sensor grid.

  23. LAYERS OF CAPACITIVE TOUCHSCREEN • Contains 3layers ,viz • Front Protective glass • Back protective glass - provides optical & strength enhancement options • Middle layer - laminated sensor grid of micro-fine wires

  24. CONTROLLER • Name: • 5000 RSU SERIAL CONTROLLER • Supply Voltage: • +5 V DC or +12V • Baud Rate • 9600 (default) and 19200 • Touch Resolution • 12bit, size independent. • Conversion Time • Approximately 15 ms per coordinate set

  25. PROPERTIES • Conductive coating that emits electric field. • Very durable. • Must be touched by some conductive materials. • Capable of multi touch.

  26. PROS & CONS OF TOUCH SCREENS PROS CONS • Direct pointing to the objects. • Fast. • Finger or pen is usable (No cable required) • No keyboard necessary • Suited to all interactive applications. • Low precision when we use finger. • Screen may be covered more by using hand • No direct activation to the selected function

  27. applications • Public Information Displays::: • Tourism displays • Trade show display • Awareness kiosks • Customer Self-Services::: • General departmental Stores • Restaurants • ATMs • Airline ticket terminals, etc. • Other uses::: • Digital jukeboxes • Computerized gaming • Student Registration systems, etc.

  28. RECENT PRODUCT S UNDER DEVELOPEMENT

  29. Recent trends • Introduction of • i-PAN7: Flat Touchscreen computer - Panel PC • Introduced by Keith & Koep of Japan. • Small frame computer. • Runs with Windows Embedded CE & built with low power ARM processor. • Uses Capacitive touch panels.

  30. conclusion • Though the Touch screen technology contains some limitations it’s • user friendly. • Fast. • Accurate. • easy to operate. • It has been widely accepted and a little modification can replace the mouse and key board completely in near future.

  31. THANK YOU

More Related