Cisco 300-370 Dumps With Real Exam Question Answers - Realexamdumps.com

1. Vendor: Cisco Exam Code: 300-370 Exam Name: Troubleshooting Cisco Wireless Enterprise Networks Version: Demo

2. DEMO QUESTION 1 Which Cisco WLC debug command allows you to determine if the certificate process is failing in the CAPWAP messages? A. debug pm pki enable B. debug cert events enable C. debug capwap events enable D. debug capwap packet enable E. debug capwap errors enable Correct Answer: E QUESTION 2 Employees upgraded company issued OS devices. Which are configured to authenticate to the network using WPA2- Eniefpnse 802 lx with LEAP As a result, the devices are no longer able to authenticate. Which action must the engineer do 10 resolve the issue? Refer to the exhibit. A. Redeploy the existing configuration profile. B. Change LEAP certificate on the ACS server. C. Reset the network settings on the devices. D. Rejoin the enterprise network manually. E. Deploy a new configuration profile with LEAP enabled Correct Answer: B QUESTION 3 An engineer has configured 802 1x for the network and all but one of the APs are passing authentication. Which configurationiscausing the failure? A. The AP has override global credentials checked. B. The switch AAA credentials do not match what is configured on ISE. C. The controller 802 1x supplicant credentials do not match what is configured on ISE D. EAP-FAST is configured on ISE for this AP.

3. Correct Answer: A QUESTION 4 An AP will be deployed to an area where DHCP Option 43 is unavailable and the WLAN engineer is unable to have DNS modifications made to support this AP. Which two actions can enable the AP to join the WLC? (Choose two) A. Issue the clear capwap private-config command in the AP console. B. Pre-stage or prime the AP on the same Layer 2 VLAN as the WLC. C. Issue the capwap ap ip default-gateway WLC IP address command in the AP console. D. Issue the capwap ap ip address WLC IP address command in the AP console. E. Issue the capwap ap controller ip address WLC IP address command in the AP console. Correct Answer: AD QUESTION 5 A Wireless LAN Cisco engineer is troubleshooting 802. 11ac WLAN at customer site Doe to interferences with neighboring 802 11n networks the engineer must determine the current primary secondary channel allocation to enhance the current configuration. Channel 60 has been chosen by the customer as primary 20 MHz channel. Which combination determines the resulting primary 40 MHz and primary 80 MHZ channels? A. primary 40 MHz channel 62, primary 80 MM: channel 58 B. primary 40 MHz channel 54, primary 80 MHz channel 58 C. primary 40 MHz channel 64, primary 80 MHz channel 60 D. primary 40 MHz channel 60, primary 80 MHz channel 56 Correct Answer: A QUESTION 6 An engineer has received an alarm on a wireless LAN controller and is unsure of its meaning. The engineer attempted to ping the wireless LAN controller interfaces. Which troubleshooting methodology does this action demonstrate? A. bottom-up B. follow the path C. shoot from the hip D. top-down E. divide and conquer Correct Answer: E QUESTION 7 Which three steps would a network engineer use to troubleshoot an AP join problem? (Choose three.) A. Validate the STP configuration. B. Verify the ping AP from the controller. C. Verify the ping AP from the client. D. Verify that the AP is getting an address from the DHCP server. E. I Validate the SNMP configuration. F. Verify the authentication configuration parameters. Correct Answer: ABF QUESTION 8 A wireless engineer has completed the configuration of a new WLAN on the existing Cisco wireless infrastructure. During testing he found that the wireless client's authenticate and received the correct ip address from the switch, but they were not able to access any of the internal or external resources. Which

4. action will resolve the issue? A. Configure static ip addresses for the wireless clients. B. Configure the default-router on the switch DHCP pool. C. Configure option 82 on the switch DHCP pool. D. Configure a dns-server on the switch DHCP pool. Correct Answer: C QUESTION 9 Which statement about the usage of the debug command in a Cisco Unified Wireless Network is true? A. Debug is enabled until manual shut off. B. Debug is a message logging severity 7. C. Debug is a restricted command and is not available in the AP CLI. D. Debug is available on the WLC serial console and web interface. Correct Answer: B QUESTION 10 A client is failing EAP authentication and a debug shows that the server is sending an Access-Reject message. Which action must you take to resolve authentication? A. Verify that the Validate server certificate on the client is disabled. B. Verify that the client certificates are from the proper CA and server certificate. C. Verify that the client server certificate has the proper Windows OlDs. D. Verify that the user account is the same in the client certificate. E. Verify that the user is using the same password that is on the server Correct Answer: B 300-370 Exam Dumps . .

5. A. The time on the controller is outside of the certificates validity time interval, so the join phase failed. B. The AP successfully joined the controller. C. The AP moved from this controller to its primary controller. D. The AP failed to join because the MAC address of the AP was not correct on the controller. E. The controller rejected all discovery requests from the AP because they were not received on the management interface subnet. Correct Answer: E QUESTION 13 Some users are experiencing inconsistent performance on their mobile devices as they move throughout the building when browsing the Internet. Which feature provides a more consistent user experiences? A. low RSSI check B. 802.11r C. RX-SOP D. optimized roaming Correct Answer: A QUESTION 14 A mobile station in a factory contains an AP configured as a work group bridge that authenticates to a root AP using EAP-FAST. To be able to use the mobile station in further parts of the factory, another root AP is installed and also configured for EAP-FAST When the mobile station is attempting to roam to the other AP, it loses connection yet can still authenticate to the first one. What is the cause for the failed authentication on RAP2? Refer to the exhibit.

6. A. RAP1 is using a different authentication protocol than RAP2. B. RAP2 has a different SSID than RAP1. C. RAP1 is using a different encryption than RAP2. D. The authentication use name and password is different. Correct Answer: A QUESTION 15 DRAG DROP Drag and drop the IP address range on the left onto the specific purpose for multicast groups on the right. Not all options are used. Select and Place: Correct Answer:

8. To Read the Whole Q&As, please purchase the Complete Version from Our website. Trying our product ! ★100% Guaranteed Success ★100% Money Back Guarantee ★365 Days Free Update ★Instant Download After Purchase ★24x7 Customer Support ★ Average 99.9% Success Rate ★ More than 69,000 Satisfied Customers Worldwide ★ Multi-Platform capabilities - Windows, Mac, Android, iPhone, iPod, iPad, Kindle Need Help Please provide as much detail as possible so we can best assist you. To update a previously submitted ticket: Guarantee & Policy | Privacy & Policy | Terms & Conditions Any charges made through this site will appear as Global Simulators Limited. All trademarks are the property of their respective owners. Copyright © 2004-2015, All Rights Reserved.