1 / 30

VLAN Trunking protocol

VLAN Trunking protocol. CCNA Exploration Semester 3 Chapter 4 . Topics. The role of VLAN Trunking Protocol (VTP) Operation of VTP Configure VTP on switches. LAN Design. Basic Switch Concepts. Wireless. VLANs. STP. Inter-VLAN routing. VTP. Semester 3. Purpose of VTP.

eara
Download Presentation

VLAN Trunking protocol

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. VLAN Trunking protocol CCNA Exploration Semester 3 Chapter 4 S Ward Abingdon and Witney College

  2. Topics • The role of VLAN Trunking Protocol (VTP) • Operation of VTP • Configure VTP on switches S Ward Abingdon and Witney College

  3. LAN Design Basic Switch Concepts Wireless VLANs STP Inter-VLAN routing VTP Semester 3 S Ward Abingdon and Witney College

  4. Purpose of VTP • You can create VLANs on a switch. • What if you have the same VLANs on 10 linked switches? Or 100 linked switches? • Do you have to create the VLANs on every switch and allow them on each trunk? • VTP helps. • But you still have to assign access ports to VLANs on each switch. S Ward Abingdon and Witney College

  5. VTP domain • Group of layer 2 switches sharing VLAN data. • Ends at router or layer 3 switch. • Switch can be linked but not part of domain. • Each switch can belong to only one domain. • Domain is defined by its name. • Proprietary to Cisco, so all switches in domain must be Cisco switches. S Ward Abingdon and Witney College

  6. VTP server • One switch acts as server. • Create VLANs on this switch. • Information saved in vlan.dat. • Server sends VLAN information to client switches over active trunk links. • Add, delete, rename VLANs on server. • Default mode of switch is server. S Ward Abingdon and Witney College

  7. VTP client • Client receives VLAN information from server. • Client switches then have the same VLANs as the server. • Client does not save VLAN information. It is held only in RAM and lost if switch is powered off. S Ward Abingdon and Witney College

  8. VTP modes • Server – default mode. Sends VLAN information to other switches. • Client – receives VLAN information and forwards it to other switches. • Transparent – forward VTP traffic but do not originate or use it. They can have their own VLANs, not shared with other switches. S Ward Abingdon and Witney College

  9. VTP defaults • Version 1. (Versions 2 and 3 also exist.) • VTP domain name is not set. • VTP mode server • One active VLAN, VLAN 1 • Configuration revision number 0 • Any switches added to a domain should be in the default condition or they may send unwanted information to other switches. S Ward Abingdon and Witney College

  10. Show vtp status • VTP Version • Maximum VLANs Supported • Number of Existing VLANs • VTP Operating Mode- server, client, or transparent. • VTP Domain Name • VTP Pruning Mode • VTP V2 Mode (disabled by default) • VTP Traps Generation • MD5 Digest (checksum of VTP configuration) • Configuration Last Modified S Ward Abingdon and Witney College

  11. VTP advertisements • Consist of VTP header and VTP message • Encapsulated inside Ethernet frame with tag to pass over trunk link. • Destination MAC address is multicast address 01-00-0C-CC-CC-CC S Ward Abingdon and Witney College

  12. VTP message header • Domain name • Domain name length • Version - VTP 1 or VTP 2, on Cisco 2960 switch. • Configuration revision number • Other fields, depending on type of message. S Ward Abingdon and Witney College

  13. Configuration revision number • 32-bit number. • Default value is 0. • It is incremented each time a VLAN is added or removed. • Reset to 0 is domain name changes. • Switch uses it to see if information is more recent that what it already holds. S Ward Abingdon and Witney College

  14. Summary advertisement • Sent immediately after a change is made, with updated revision number. • Sent every 5 minutes by servers and clients to check on current VTP configuration revision number. • Contains the VTP domain name, the current revision number, and other VTP configuration details. S Ward Abingdon and Witney College

  15. VTP Summary advertisement • A switch receives a summary advertisement. • Compares domain name to its own domain name. • If name is different, the switch ignores the packet. • If the name is the same, the switch compares the revision number to its own revision number. • Number higher or equal, ignored the packet. • Number lower, sends an advertisement request. S Ward Abingdon and Witney College

  16. Request Advertisement Sent by client to server if: • The VTP domain name has been changed • The switch receives a summary advertisement with a higher configuration revision number than its own • A subset advertisement message is missed for some reason • The switch has been reset S Ward Abingdon and Witney College

  17. Subset advertisement • Contains VLAN information. Several may be needed if there is a lot of information. • Sent by server in response to a request or after: • Creating or deleting a VLAN • Suspending or activating a VLAN • Changing the name of a VLAN • Changing the MTU of a VLAN S Ward Abingdon and Witney College

  18. Subset advertisement S Ward Abingdon and Witney College

  19. Subset advertisement VLAN info S Ward Abingdon and Witney College

  20. Pros and cons • Small network – don’t bother with VTP. • Big network – good for consistency and easier to make changes. • Server switches need lots of flash memory, clients do not. • Redundancy – don’t have everything on one server switch. • Problems from large domains. • Extreme care when adding a switch. S Ward Abingdon and Witney College

  21. Why transparent? • Put a switch in transparent mode if it has local VLANs that are not on other switches. • The other switches do not need to know about them. S Ward Abingdon and Witney College

  22. VTP pruning • Disabled by default • Enable it on one server in domain. • Stops VLAN traffic from being sent on links that do not lead to devices on that VLAN. • Cuts down on traffic on trunk links. S Ward Abingdon and Witney College

  23. Domain names and passwords • Configure a domain name on the first server switch. The other switches will learn it. • If you configure it on other switches, check that it is exactly the same. It is case sensitive. • If you use a password then it must be exactly the same on all switches. S Ward Abingdon and Witney College

  24. Versions • VTP version 1 is used by default on Catalyst switches, but they can use version 2. • If you configure version 2 on one switch then the other switches should learn the new version and change to it. • If a switch is not capable of running version 2 then it will not exchange advertisements. S Ward Abingdon and Witney College

  25. Configure VTP • Configure VTP with a domain name before creating VLANs on the server. • Existing VLANs are removed when you start to configure VTP. • Check that links are trunk links. • Configure client switches to client mode. S Ward Abingdon and Witney College

  26. Commands on server • SW1(config)#vtp domain cisco1 • SW1(config)#vtp password cisco • (Password is optional) • Server mode is default, but if it was changed: • SW1(config)#vtp mode server • Version 1 is default, but command is: • SW1(config)#vtp version 1 S Ward Abingdon and Witney College

  27. Commands on server • Create VLANs • Check that link is a trunk. • Check VTP operation • SW1# show vtp status • Assign switch ports to VLANs. S Ward Abingdon and Witney College

  28. Client configuration • SW2(config)#vtp mode client • Check that link is a trunk. • Check VTP operation • SW2# show vtp status • Assign switch ports to VLANs. S Ward Abingdon and Witney College

  29. Things to check • VTP Version. It needs to be the same on all switches in the domain. • Domain name. Is it exactly the same on all switches? • VTP Password if any. Is it exactly the same on all switches? • Check that there is at least one server. Better to have at least two. • If you recently added a new switch, had its revision number been set to 0? S Ward Abingdon and Witney College

  30. The End S Ward Abingdon and Witney College

More Related