1 / 25

Latest Developments in MIPI Specifications

Latest Developments in MIPI Specifications. April 30, 2014. Yoav Lavi VLSI Plus Ltd. AGENDA. Introduction to MIPI® MIPI® standards - scope How MIPI® standards are created MIPI® CSI2 standard for camera to processor interface VLSI Plus’ CSI2 compliant IP cores

ferrol
Download Presentation

Latest Developments in MIPI Specifications

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Latest Developments in MIPI Specifications April 30, 2014 Yoav Lavi VLSI Plus Ltd

  2. AGENDA • Introduction to MIPI® • MIPI® standards - scope • How MIPI® standards are created • MIPI® CSI2 standard for camera to processor interface • VLSI Plus’ CSI2 compliant IP cores • Selected MIPI® third generation standards: • MPHY • UNIPRO • CSI3 • VLSI Plus’ Roadmap

  3. Who Are We? • Experts in VLSI Design and Architectures • Providing Engineering Services to the VLSI community • Providing specialized IP cores • Per customer tailoring • Located in Israel • Contributor – level MIPI member since 2005

  4. MIPI® (Mobile Industry Processor Interface) • Industry consortium • Creates standards for interface between components of mobile devices • Started by Nokia and ST • 252 Members (as of April 2014): • 5 Founder Members (Nokia, ST, Intel, TI, Samsung) • 81 Contributor Members • 165 Adopter Members • 1 Promoter Member

  5. MIPI® - the Creation of Standards • MIPI® has a technical steering committee, which guides a multitude of Working Groups • Typical Working Group has 40 members; some 15 are active • When a Working Group works on a standard, weekly phone conferences are held (typically 3 hours each), in addition to many emails and documents • In addition, every three months there is a F2F meeting • Each WG had a Chairman who makes sure that the group is on schedule, and that due technical diligence is done to all parts of the spec. • Participants present technical arguments, according to the viewpoint of their companies; e.g. some participants look at easy SW implementation, while others are concerned mainly with low power consumption • Each standard has several Draft stages • Major Draft stages as well as final versions undergo a period of all members review and subsequent vote • Final draft is approved / disproved by MIPI BOD

  6. Camera Serial Interface 2 (CSI-2)Introduction • Working Group (CWG) started by MIPI® in March 2004 • In June 2004 MIPI® Technical Steering Group recommended that Display and Camera Interfaces should use the same Physical layer – the D-PHY, which was being developed by the PHY Working Group • At some point It was suggested that the CWG will adopt SMIA CCP2. This proposal was rejected • CSI2 over D-PHY is superior to CCP2 - it allows faster rate at lower power consumption, adds LP signaling, and more

  7. CSI2 camera-processor link

  8. Camera Serial Interface 2 (CSI-2)D-PHY Highlights • 1 DDR Clock Lane • 1 to 4 Data Lanes • High Speed Differential Mode for data transfer • Low Power Mode, using CMOS levels on the two conductors of each pair, for low speed signaling • Low Power Mode is entered between packets  reduced overall power consumption • Original speed target – 500M bps per lane (“D”) • First implementations stopped at 1Gbps • Current version limit - 1.5Gbps. • 8 lanes extended-DPHY (non-DPHY) are in the market

  9. Camera Serial Interface 2 (CSI-2)DPHY Universal Lane Module Functions

  10. Camera Serial Interface 2 (CSI-2) Highlights (A) • The processor controls the camera via two CCI lines (not part of DPHY) • Camera sends packets of data to the processor via DPHY lanes • Packets can be Short (32 bit) or Long • All packets have an 8 bit ECC filed in the Header, allowing correction of any single-bit error and detection of all two-bit errors • Short packets are sentto indicate events and to time synchronization (e.g. FS, FE, LS, LE) • Long packets are used to send video lines and user defined data

  11. Camera Serial Interface 2 (CSI-2) Highlights (B) • Long packet header comprises the following fields: • Data-Type, defining one of 19 video formats • Virtual channel selection • Length of the packet, in bytes • 8-bit ECC • Long packets end with a 16 bit CRC • For each of the 19 video formats, bit ordering is defined • Optional DPCM data compression – 10 or 12 bit pixels can be compressed to 8, 7 or 6 bits per pixel

  12. VLSI Plus IP Product Portfolio A: First Generation CSI2 Rx/Tx Cores

  13. SVTCS4-AP1 – Serial Video Transmitterfor CSI2; 1-4 data lanes • ASIC and FPGA Versions • 1-4 lanes, Low gate count • Modular – generic core and customized application package • Optional hardware for CSI2/DPHY link test • Optional DPCM compression

  14. SVR-CS4 Block Diagram

  15. VLSI Plus IP Product Portfolio B: Second Generation CSI2 Rx/Tx Cores

  16. Second Generation CSI2 Receiver – the SVRPlus-CSI2-I For Recently Introduced of the line sensors. • Configurable 1 or 2 clock lanes; 1,2,3,4 or 8 data lanes • 64 bit internal data bus • Configurable 1, 2 or 4 pixels output per clock • Up to 1.5Gbps per lane; • Extensive set of registers, accessible by AMBA APB bus • Support of all video formats • Programmable timing parameters • Support of CSI2 DPCM decompression • Optional output FIFO for continuous output streams • Error counting hardware, for on-line BER measurements

  17. Second Generation CSI2 Receiver – the SVRPlus-CSI2-I Simplified Block Diagram:

  18. SVT-CS4-AP2 – Multiplexing CSI2 Serial Video Transmitter • Multiplex up to 12 independent video sources • Multiplex base is virtual-channel/data type combination • Supports DPCM compression Simplified Block Diagram:

  19. MIPI Camera Interface - Next Generation

  20. MPHY Benefits (A) • BURST mode operation for improved power efficiency • Multiple transmission modes with different bit-signaling and clocking schemes • Multiple transmission speed rates per BURST mode for better bandwidth utilization and for mitigation of interference problems. • Fixed rates for high-speed mode, flexible (within ranges) for low-speed mode. • Multiple power saving modes • Symbol coding (8b10b) for spectral conditioning, clock recovery, and in-band control options for both PHY and Protocol level • Clocking flexibility: independent local reference clock or shared clocks

  21. MPHY Benefits (B) • Optical friendly: enables low-complexity electro-optical signal conversion and optical data transport inside the interconnect between MODULEs • Optimized for short interconnect (<10 cm); extendable to a meter with optical converters and optical waveguides. • Configurability: differences in supported functionality (to reduce cost) enables tuning and implementation for best performance

  22. UNIPRO and CSI3

  23. VLSI Plus Next Generation IP products

More Related