1 / 15

Work Points, Work Axes, and Work Planes

Work Points, Work Axes, and Work Planes. Work Points. Work point Independent entity Location is defined in space May be placed or projected onto part faces, linear edges, or onto an arc or circle Can be constrained to center points of arcs, circles, and ellipses. Work Axis. Work axis

gates
Download Presentation

Work Points, Work Axes, and Work Planes

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Work Points, Work Axes,and Work Planes

  2. Work Points • Work point • Independent entity • Location is defined in space • May be placed or projected onto part faces, linear edges, or onto an arc or circle • Can be constrained to center points of arcs, circles, and ellipses

  3. Work Axis • Work axis • Line extending forever in two directions • Useful for locating the center of a hole or cylinder • Used to create revolved features • May be constrained in assembly models

  4. Work Axis Through Two Points • Initiate a work axis • Select two points on an object • Points may be existing corners or midpoints

  5. Work Planes • Work planes • Continuous two-dimensional planes • Can be used to establish sketch planes • Assembly constraints can also be applied to work planes

  6. Applying Work Planes • Work plane can be placed on an existing part face • Work plane feature is initiated • Surface is selected

  7. Offsetting a Work Plane • Initiate work plane feature • Click, hold, and drag the cursor on an existing flat part surface • Identify desired offset distance

  8. Attaching a Sketch Plane • Create sketch plane and sketch geometry

  9. Angled Work Planes • Initiate work plane • Click on an EDGE • Select reference surface • Enter angle • Rotate angle CCW from reference surface

  10. Angled Work Planes • Angled work plane may be established by selecting two parallel EDGES

  11. Angled Work Planes • Angled work plane may also be established by selecting three corners or midpoints on an existing object(s)

  12. Tangent Work Planes • Select cylindrical surface close to area where work plane should be tangent • Identify original plane in origin folder that the new work plane should be parallel to

  13. Work Planes Through a Cylinder • Initiate a work axis • Select cylinder’s curved surface for placement • Initiate a work plane • Select work axis in cylinder • Select principle plane in origin folder and enter reference angle

  14. Work Planes Through a Cylinder • Initiate a work axis • Place it by selecting cylinder’s curved surface • Initiate work plane • Select work axis in cylinder • Select a principle plane in the origin folder and enter a reference angle

  15. Work Planes Between Work Planes • Create work plane through two parallel edges • Offset second work plane an appropriate distance away • Create third work plane between the first two by selecting both in any order

More Related