1 / 13

Impedance Spectroscopy Study of an SOFC Unit Cell

Impedance Spectroscopy Study of an SOFC Unit Cell. Model Definition. Model Definition. Material balances for all species using Maxwell-Stefan Fluid flow in the open channels and in the porous electrodes: Navier -Stokes equations Brinkmann equations Current balances and charge balances

gerek
Download Presentation

Impedance Spectroscopy Study of an SOFC Unit Cell

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Impedance Spectroscopy Study of an SOFC Unit Cell

  2. Model Definition

  3. Model Definition • Material balances for all species using Maxwell-Stefan • Fluid flow in the open channels and in the porous electrodes: • Navier-Stokes equations • Brinkmann equations • Current balances and charge balances • Defined in the electrodes, pore electrolyte, and the electrolyte that separates the anode and cathode • Electrode kinetics using Butler-Volmer including concentration overpotential

  4. Model Definition • Parametric sweeps in the study are done by applying a constant average current density of 1400 [A/m2] at the steady polarization, except for the last case where the current is varied: • A floating potential condition is applied so that an unknown constant potential is set at the current collector, but an additional equation is added that sets the integral of the current density at the current collector to a fixed value.

  5. Specifying a Harmonic Perturbation • Add a Harmonic Perturbation feature to the Electric Potential boundary condition • Make the perturbation small (mV range) in order to obtain a linear approximation of the nonlinear system of equations • Laplace transform allows for solution in the frequency domain, which is done automatically by COMSOL

  6. A Note on Post Processing • In the Nyquist plot the complex impedance Z is plotted, which is evaluated using integral operators at the current collector boundary • Z = ( Pertubation Voltage ) / ( Pertubation Current ) • For a more accurate evaluation of the integral of the current density at the current collector boundary, the reacf() operator is used in combination with an integration operator using summation over the node points (See the Comsol Multiphysics Reference Manual for a general description of the reacf() operator) • The ”Compute Differential” check box should be disabled in the Nyquist plot in this case when plotting only the resulting harmonic pertubations

  7. Study Settings • AC Impedance Stationary Study used • Default solver sequenced modified to use a Fully Coupled solver AC Impedance Stationary Study Selected in theModel Wizard Add a Fully CoupledSolver and disableSegregated

  8. Influence of Cathodic Exchange Current Density The anodic and cathodic circles become moreseparated as the difference between the two exchange current densities increases: - Turquoise curve i0_a = i0_c Increasing frequency Anodic exchange current density = 0.1 [A/m2] Electrolyte conductivity = 5 [S/m] Reference diffusivity = 3.8·10-8 [m2/s]

  9. Influence of Anodic Exchange Current Density The anodic and cathodic circles become moreseparated as the difference between the two exchange current densities increases: - Blue curve i0_a = i0_c Cathodic exchange current density = 0.01 [A/m2] Electrolyte conductivity = 5 [S/m] Reference diffusivity = 3.8·10-8 [m2/s]

  10. Influence of Electrolyte Conductivity Anodic exchange current density = 0.1 [A/m2] Cathodicexchange current density = 0.01 [A/m2] Reference diffusivity = 3.8·10-8 [m2/s]

  11. Influence of Diffusivity Anodic exchange current density = 0.1 [A/m2] Cathodicexchange current density = 0.01 [A/m2] Electrolyte conductivity = 5 [S/m]

  12. Influence of Current Density Anodic exchange current density = 0.1 [A/m2] Cathodicexchange current density = 0.01 [A/m2] Electrolyte conductivity = 5 [S/m] Reference diffusivity = 3.8·10-8 [m2/s] factor = 1 corresponds to 1400 [A/m2] Anodic exchange current density = 0.1 [A/m2] Cathodicexchange current density = 0.01 [A/m2] Electrolyte conductivity = 5 [S/m]

  13. Concluding Remarks • The model is small in order to run a parametric sweep and a frequency sweep in every parameter value in less than five minutes • Longer channels and larger number of channels can also be simulated • Heat transfer analysis can also be added • There are a lot of conclusions that can be drawn from these model studies, this only presents a scratch on the surface

More Related