1 / 4

Compressor ReVamp and Fabrication

Compressor ReVamp and Fabrication. PO9452. Safety: Top Priority Installation, structurally sound, ease of operation, noise and vibration reduction, ventilation Room Considerations Storage of compressor, easily accessible, room to disassemble, storage of tools

gracine
Download Presentation

Compressor ReVamp and Fabrication

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Compressor ReVamp and Fabrication PO9452

  2. Safety: Top Priority • Installation, structurally sound, ease of operation, noise and vibration reduction, ventilation • Room Considerations • Storage of compressor, easily accessible, room to disassemble, storage of tools • Scaling Down Compressor (if necessary) • Reduction of air pressure (100psi), reduction of power (25HP), reduction of electrical feed • Interface • Prepare interface, prepare DAQ, set-up sensors Customer Needs

  3. Mechanical • Scale Air Pressure approx 100psi • Scale Motor Power approx 25HP • Maintain room temperature change, less than 5° change • Structural • Vibration response, operate at less than 8.5Hz • Scale Motor Power approx 25HP • Safety • To safely access compressor, at least 2.5’ on all sides • Maintain operational safety, post signs or labels at most 1’ from hazardous area • When operational, noise level less than 75dB • Data Acquisition and Interface • Use LabView as interface between operator and compressor • DAQ will be used to collect information and store in a database • Data collected will be analyzed to ensure compressor is operating within test limits (pressure and temperature) Specifications

  4. Sneha (Project Lead) • Scale Air Pressure approx 100psi and Motor Power 25HP • Ed B. (Mech E) • Scale Air Pressure approx 100psi and Motor Power 25HP • Noise and Vibration reduction and dampening • Alex (Mech E) • Scale Air Pressure approx 100psi and Motor Power 25HP • Ventilation and airflow analysis of cell • Ed W. (Comp E) • Prepare DAQ and user interface • Install DAQ • Anna (Industrial E) • Acquire technical documents • Establish logistics of compressor move Work Breakdown Structure

More Related