1 / 17

Calculation of Internal Electrical Resistance and Power Loss in a Electrochemical Cell

Calculation of Internal Electrical Resistance and Power Loss in a Electrochemical Cell by fitting Polarization Curve Data to the Butler-Volmer Equation. Craig E. Nelson - Consultant Engineer. Basic Circuit Model. Simple Circuit Model For Basic Power Loss Analysis.

Download Presentation

Calculation of Internal Electrical Resistance and Power Loss in a Electrochemical Cell

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Calculation of Internal Electrical Resistance and Power Loss in a Electrochemical Cell by fitting Polarization Curve Data to the Butler-Volmer Equation Craig E. Nelson - Consultant Engineer

  2. Basic Circuit Model

  3. Simple Circuit Model For Basic Power Loss Analysis Rinternal = Vinternal / Icell Vinternal = Vopencircuit – Vload Therefore Rinternal = ( Vopencircuit – Vload ) / Icell Rinternal does not = - d(Vload) / d(Icell)

  4. Cathode Crossover Current Source Anode Crossover Current Source Equivalent Circuit Model For a Cell Showing Anode and Cathode Crossover Loss Mechanisms

  5. Cathode Conduction Loss Anode Simplified Equivalent AC Circuit Model for a Two Electrode Cell for General Interpretation of Impedance Spectroscopy Data and Current – Voltage Transient Performance Analysis

  6. Typical Measured and Fitted Cell Polarization Curve Plots

  7. Log-Lin plot of a typical Measured and Fitted Cell V-I Curve

  8. Simple Formulaic Model for a Generic Electro-Chemical Cell without Mass Transport Losses Vload = Vnernst - Vactivation - Vohmic Vload = Vnernst - Vtaffel * ASINH ( Iload / (2 * Io ) ) - Rohmic * Iload Vnernst = Thermodynamically reversible electro-chemical potential Vtaffel = slope of Taffel curve ASINH = Hyperbolic arc sine function Iload = Load current Io = thermodynamic exchange current in the absence of overpotential Rohmic = electronic resistance in current collectors + ionic resistance in electrolyte and Nafion layer

  9. Helpful Correlation Formulae Fitted to Measured Data Vload = .9 - .095 * ASINH ( Iload / ( 2*.012 ) ) - .25 * Iload Vdrop_internal = .095 * ASINH ( Iload / ( 2*.012 ) ) + .25 * Iload Rload = [ .9 - .095 * ASINH ( Iload / ( 2*.012 ) ) - .25 * Iload ] / Iload Rinternal = [ .095 * ASINH ( Iload / ( 2*.012 ) ) + .25 * Iload ] / Iload Apparently the internal ionic and electronic resistance total is about .25 ohm

  10. Linear scale plot of contributing parts of internal voltage drop vs. current

  11. Log scale plot of contributing parts of internal voltage drop vs. current

  12. Typical load and internal lost power and efficiency Curves

  13. Typical load and lost power and efficiency curves - log-linear scale

  14. Breakdown of typical internal power loss & efficiency vs. current – linear scale

  15. Breakdown of typical internal power loss & efficiency vs. current – log-linear scale

  16. Conclusion • Incremental resistance ( - d(v) / d(i) ) should not be used • Simple circuit models based on the classic Butler-Volmer equations seem to model actual cell behavior quite well over two decades of output current • Use of the model equations allows a useful deconstruction of cell polarization curves. This, in turn, allows power loss from several principal mechanisms to be estimated with reasonable accuracy • Further work using electrical impedance spectroscopy methods can be used to refine the model presented here.

More Related