1 / 16

Project 2 :Plastic Moulding Tray

Project 2 :Plastic Moulding Tray. Situation: Some small things should be kept well Specification: A creative tray is appropriate to keep some small things. Plastic is a good material to form the shape of the tray. Project 2 :Plastic Moulding Tray. Material provided:

gwendolyni
Download Presentation

Project 2 :Plastic Moulding Tray

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Project 2:Plastic Moulding Tray Situation:Some small things should be kept well Specification: • A creative tray is appropriate to keep some small things. • Plastic is a good material to form the shape of the tray.

  2. Project 2:Plastic Moulding Tray • Material provided: • Acrylic sheet, 160 x 160 x 3mm • Chip Board, 150 x 150 x 12mm • Plywood, 160 x 160 x 12mm Duration:5 cycles

  3. Project 2:Plastic Moulding Tray Suggested Procedures 1.Information Collection Collect information from magazines, department stores, internet, etc. Record the data by drawings, photos or print out.

  4. Information Symbolic shape? Capacity Sharp edges? Project 2:Plastic Moulding Tray 2.Design Consideration Solution Artistry

  5. Project 2:Plastic Moulding Tray Final Idea Initial Ideas 3. Solution 4. Working Process a) Design the shape and draw it into the chipboard. b) Cut all the components from the chipboard by coping saw. c) Attach the components on the backing board with white glue and nails. d) Soften the acrylic sheet by the oven.

  6. Project 2:Plastic Moulding Tray e) Place the acrylic sheet into the mould and clip it in the bench vice firmly until it cools down. f) Trim the edge of the acrylic tray by the coping saw. g) Refine the edge of the tray by hand file. h) Polish the edge by wet water-proof glass paper and Brasso.

  7. Project 2:Plastic Moulding Tray 5. Assessment criteria Product: Appearance – 70% Creativity – 30% Folio: Full steps – 50% Show ideas clearly – 30% Drawing quality – 20% 6. Evaluation

  8. Wooden Mould (chipboard) Wooden Mould Soften the acrylic sheet by oven (~170oC) Project 2:Plastic Moulding Tray Reference

  9. Project 2:Plastic Moulding Tray Press Clip the acrylic sheet in the vice until it cools Press

  10. Project 2:Plastic Moulding Tray

  11. Project 2:Plastic Moulding Tray

  12. Project 2:Plastic Moulding Tray

  13. Project 2:Plastic Moulding Tray

  14. Project 2:Plastic Moulding Tray

  15. Project 2:Plastic Moulding Tray

  16. Project 2:Plastic Moulding Tray

More Related