1 / 1

WTP motion picture

Drinking water transfer printing movies consist of a transparent layer of polyvinyl alcohol (PVA), that's printed having a range of decorations. The ink layer is then sealed. The PVA layer dissolves on make contact with with water. Thereafter, the seal is dissolved by an activator (a particular kind of solvent) and only the colour layer remains. The paint layer adheres to the workpiece immersed and behaves just like a lacquer layer right after drying.

Download Presentation

WTP motion picture

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. WTP film Drinking water transfer printing movies include a transparent layer of polyvinyl alcoholic beverages (PVA), which is printed using a assortment of decorations. The ink layer is then sealed. The PVA layer dissolves on speak to with drinking water. Thereafter, the seal is dissolved by an activator (a particular sort of solvent) and just the color layer stays. The paint layer adheres for the workpiece immersed and behaves just like a lacquer layer right after drying. The perfect h2o temperature for your process of printing drinking water movies is 32 ° C. In cold weather up to 34 ° Celsius. The transfer h2o transfer movie needs to be cut on all sides in a length of 1 cm to stop winding when placing around the area on the drinking water. Make sure you don't stay with tape due to the fact the movie can not increase throughout the immersion method (If the PVA is dissolved, the film "relaxes" and the surface area size will increase minimally). Following the specified publicity time, spray the film at a length of 20-30 cm inside the direction of crossover with activator of twenty five to 45 g / m² (depending on the reason, considering that hugely printed films need to have a lot more activator). The workpiece may be immersed after approx. 15 seconds. All factors which can be not manufactured from Abdominal muscles plastic should be geared up ahead of diving (eg by lacquering). Right after approx. 1 moment, the workpiece must be washed with sizzling h2o at forty two ° C (don't utilize a sturdy drinking water jet, portions of the film may possibly dissolve). The coloration shown might vary in the original film according to the output system. For a end result that is certainly akin to the image, the color suggestion background should match the chosen drinking water transfer print movie. Check out out this internet site: http://cursopinturahidrografica-wtp.com

More Related