1 / 20

MFGE 404 Computer Integrated Manufacturing CIM

MFGE 404 Computer Integrated Manufacturing CIM. A T I L I M U N I V E R S I T Y Manufacturing Engineering Department Lecture 8– Industrial Robots Analysis Fall 2005/2006. Dr. Saleh AMAITIK. Industrial Robot Kinematics.

hildas
Download Presentation

MFGE 404 Computer Integrated Manufacturing CIM

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. MFGE 404 Computer Integrated Manufacturing CIM A T I L I M U N I V E R S I T Y Manufacturing Engineering Department Lecture 8– Industrial Robots Analysis Fall 2005/2006 Dr. Saleh AMAITIK

  2. Industrial Robot Kinematics • Robot kinematics is concerned with the position and orientation of the robot’s end-of-arm, or the end effector attached to it, as a function of time but without regard for the effects of force or mass. • Our treatment of manipulator kinematics will be limited to the mathematical representation of the position and orientation of the robot’s end-of-arm. • The kinematics analysis involves two different kinds of problems: • Determining the coordinates of the end-effector or end-or-arm for a given set of joints coordinates (Forward Kinematics), and • Determining the joints coordinates for a given location of the end-effector or end-of-arm (Backward Kinematics).

  3. Industrial Robot Kinematics • Both the joint space and world space methods of defining position in the robot’s space are important. • The joint space method is important because the manipulator positions its end-of-arm by moving its joints to certain values. • The world space method is important because applications of the robot are defined in terms of points in space using Cartesian coordinate system.

  4. Forward and Backward Transformations • What is needed is a means of mapping from one space method to the other. • Mapping from joint space to world space is called Forward transformation, and • Converting from world space to joint space is called Backward transformation.

  5. Forward and Backward Transformation for a Robot with Two Joints 1- An OO Robot • Forward Transformation • X = λ2 and Z = λ1 • Backward Transformation • λ1 = Z and λ2 =X Where X and Z are the coordinate values in the world space λ1 and λ2 are the values in joint space

  6. Forward and Backward Transformation for a Robot with Two Joints 2 - An RR Robot • Forward Transformation • The forward transformation is calculated by noting that the lengths and directions of the two links might be viewed as vectors in space:

  7. Forward and Backward Transformation for a Robot with Two Joints Vector addition or r1 and r2 (and taking account of link L0) yields the coordinate values of X and Z at the end-of-arm:

  8. Forward and Backward Transformation for a Robot with Two Joints • Backward Transformation • For the backward transformation, we are given the coordinate positions X and Z in world space, and we must calculate the joint values that will provide those coordinate values.

  9. Forward and Backward Transformation for a Robot with Three Joints • Let us consider a manipulator with three degrees-of-freedom, all rotational, in which the third joint represents a simple wrist. • The robot is a RR:R configuration is shown below: • The robot is limited to the x-z plane and the origin of the axis system at the center of joint 1

  10. Forward and Backward Transformation for a Robot with Three Joints • The arm-and-body (RR:) provides position of the end-of-arm • The wrist (:R) provides orientation. • For the forward transformation, the X and Z coordinates can be calculated as follows: • Let α the orientation angle. It is the angle made by the wrist with the horizontal. It equals the algebraic sum of the three joint angles:

  11. Forward and Backward Transformation for a Robot with Three Joints • In the backward transformation, we are given the world coordinates X, Z, and α, and we want to calculate the joint values θ1, θ2 and θ3 that will achieve those coordinates. • This is accomplished by first determining the coordinates of joint 3 as follows: • Knowing the coordinates of joint 3, the problem of determining θ1 and θ2 is as follows: • The value of joint 3 is then determined as

  12. Forward and Backward Transformation for a Robot with Four Joints in Three Dimensions • Consider the four degree-of-freedom robot shown below. Its configuration is TRL:R. • Joint 1 (T type) provides rotation about Z-axis. • Joint 2 (R type) provides rotation about a horizontal axis whose direction is determined by joint 1. • Joint 3 (L Type) is a piston that allows linear motion in a direction determined by joints 1 and 2. • Joint 4 (R type) provides rotation about an axis that is parallel to the axis of joint 2

  13. Forward and Backward Transformation for a Robot with Four Joints in Three Dimensions • The values of the four joints are, respectively,.θ1, θ2, λ3, and θ4. • Given these values the forward transformation is given by: where

  14. Forward and Backward Transformation for a Robot with Four Joints in Three Dimensions • In the backward transformation, we are given the world coordinates X, Y, Z, and α. Where α specifies orientation. • To find the joint values, we define the coordinates of joint 4 as follows:

  15. Homogenous Transformation • Each of the previous manipulators required its own individual analysis, resulting in its own set of trigonometric equations, to accomplish the forward and backward transformations. • There is a general approach for solving the manipulator kinematics equations based on homogeneous transformations. • The goal in robot motion is often to describe the effect of combined motions resulting from both translation and rotation. • The homogenous transformation approach utilizes vector and matrix algebra to define the joint and link positions and orientations with respect to a fixed coordinate system (world space). • The end-of-arm is defined by the following 4 x 4 matrix:

  16. Homogenous Transformation • Where T consists of four column vectors representing the position and orientation of the end-of-arm or end-effector • The vector P defines the position coordinates of the end effector relative to the world x-y-z coordinate system. • The vectors a, o, and n define the orientation of the end effector. • The a vector, called approach vector, points in the direction of the end effector. • The o vector, or orientation vector, specifies the side-to-side direction of the end effector. For a gripper, this is in the direction from one fingertip to the opposite fingertip • The n vector is the normal vector, which is perpendicular to a and o.

  17. Homogenous Transformation • In manipulator kinematics, calculations based on homogeneous transformations are used to establish the geometric relationships among links of the manipulator. • Let A1 = a 4 x 4 matrix that defines the position and orientation of link 1 with respect to the world coordinate axis. • Similarly, A2 = a 4 x 4 matrix that defines the position and orientation of the link 2 with respect to link 1. • Then the position and orientation of link 2 with respect to the world coordinate system (called T2) is given by: • T2 = A1 A2 • Where T2 represents the position and orientation of the end-or-arm (end of link 2) of a manipulator with two joints. • A1 and A2 define the changes in position and orientation resulting from the actuations of joints 1 and 2 on links 1 and 2 respectively.

  18. Homogenous Transformation • In general, the position and orientation of the end-of-arm or end-effector can be determined as the product series of homogeneous transformations, usually one transformation for each joint-link combination of the manipulator. • From this matrix, a five degree of freedom manipulator can yield a transformation matrix T = 0A5 that specifies the position and orientation of the end point of the manipulator relative to the world coordinate system.

More Related