1 / 23

Turbulent dynamics of pipe flows captured in a ‘2 +ɛ’-dimensional model

Turbulent dynamics of pipe flows captured in a ‘2 +ɛ’-dimensional model. Ashley P. Willis LadHyX, École Polytechnique, Palaiseau, France., Rich Kerswell Dept. of Maths., University of Bristol, U.K. + Yohann Duguet, Chris Pringle. θ. z. r. Distinct spatial structures:.

hjoan
Download Presentation

Turbulent dynamics of pipe flows captured in a ‘2 +ɛ’-dimensional model

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Turbulent dynamics of pipe flows captured in a ‘2+ɛ’-dimensional model Ashley P. Willis LadHyX, École Polytechnique, Palaiseau, France., Rich Kerswell Dept. of Maths., University of Bristol, U.K. + Yohann Duguet, Chris Pringle

  2. θ z r Distinct spatial structures: Localised “puff” plot of axial vorticity Re >~ 1650 Expanding “slug” Re >~ 2250 Pipe flow Parabolic laminar flow D, diameter U, mean axial flow (constant) Re = UD / ν No linear instability

  3. Temporal characteristics Peixinho & Mullin (2006), PRL Energy t sudden relaminarisation

  4. Re~ 750 Repuff-slug~2250 Disturbance amplitude exact travelling waves F&E (2003) W&K (2004) (all unstable) Issues : Does turbulence become sustained? How are TWs related to turbulence? How does localised turbulence remain localised!? Re

  5. θ z r Aim: Want to study pipe flow as a subcritical dynamical system. Problems: System has a vast number of degrees of freedom! Short periodic pipes cannot capture the spatio-temporal characteristics. Full 3-dim calculations are expensive. Parabolic laminar flow D, diameter U, mean axial flow (constant) Re = UD / ν Localised “puff” plot of axial vorticity Expanding “slug” Q: Can we reduce the system but capture localised structures?

  6. localised in z → keep axial resolution • near-wall structures important, detachment from wall during relaminarisation; r → keep radial resolution 1 1 • → leaves only θ . Minimal 3-dimensionalisation: Fourier modes, m = −m0, 0, m0 only. • i.e. only 3 degrees of freedom in θ : • a mean mode, • a sinusoidal variation in θ, • an azimuthal shift of the sinusoid. ‘ɛ’ ‘2+ɛ’-dimensional model.

  7. Do we capture the spatial characteristics? puff → slow delocalisation → slug ‘2+ɛ’-dim. 160,000 d.f. (Lz = 50 diameters, 25 shown) Re = 2600, 3200, 4000 3-dim. 3,600,000 d.f. Re = 2000, 2300, 2700

  8. Reduced model preserves temporal characteristics... long-term transients, sudden decay, memoryless (Lz = 50 diameters, Re=2800)

  9. (W&K 2007)

  10. Probability of surviving to time T Lz = 32 π diameters

  11. Short pipes

  12. τ ~ 1/(Rec-Re)5 Rec = 3450

  13. Disturbance amplitude exact travelling waves Lower branch associated with `edge’ Re

  14. Amplitude Turbulent ‘Edge’ TW Laminar t

  15. The laminar-turbulent ‘edge’(short pipe Lz = π diameters; 10,000 d.f.)

  16. Model has exact TW solutions (Newton-Krylov code by Yohann Duguet) fast axial flow slow axial flow

  17. The laminar-turbulent ‘edge’(short pipe Lz = π diameters; 10,000 d.f.)

  18. Roll + wave energy Amplitude ~ Re-3/2

  19. The ‘edge’ in a long pipe (work in progress) Turbulence at increasing Re Re = 2600, 3200, 4000 Edge at high flow rate, Re = 4000 exact soln. (Chris Pringle) exact soln. (Yohann Duguet)

  20. Edge at high flow rate, Re = 4000 Re = 10000  see Yohann’s talk

  21. Model has TWs, long-term transients, memoryless, spatially localised puffs, slugs, chaotic edge state. • Amplitude of rolls+waves ~ Re-3/2 . • Can we use the model to explain why puffs stay localised? • Is there a measure that predicts the puff-slug transition? • ..or a sensitive measure that pre-empts relaminarisation? • What is the effect of ‘noise’ on transitions, relam., puff-slug...? • What is the ‘minimal flow unit’ that produces transients? • Are there exact localised solutions on the edge? periodic orbits? Ref.: arXiv.org:0712.2739

  22. Time-averaged profiles within the puff Full 3-dim, Re = 2000 2+ɛ-dim model, Re = 3000

More Related