1 / 5

2019 Latest Updated Cisco Exam Guide PDF - 100% Real 300-101 Exam Question Answers

Cisco 300-101 Exam Dumps is available in PDF file which you could be consciously get an A grade in this Dumps. Despite you go anywhere you must be visit dumps4download.com, our experts have been composed Implementing Cisco IP Routing (Route) 2.0 Certification by the excellent design and verified it as they worked on it. Cisco 300-101 Exam PDF is based on the trust of our customers, you must be compliance our platform over here https://ccnp-300-101-dumps.blogspot.com. Get the rush and buy Cisco 300-101 study material in full PDF file from dumps4download.com. We are providing the real dumps question & answers which are ease your stamina and you would not get cumbrous to learn these questions & answers. We are also providing you 100% passing assurance with money back guarantee, so donu2019t even consume a minute and buy this dumps from given website.<br>Furthermore: <br>https://ccnp-300-101-dumps.blogspot.com<br>

jamesconnor123
Download Presentation

2019 Latest Updated Cisco Exam Guide PDF - 100% Real 300-101 Exam Question Answers

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Cisco 300-101 Implementing Cisco IP Routing (Route) 2.0 https://ccnp-300-101-dumps.blogspot.com/

  2. Question: 1 A network engineer is enabling RIPng on a new customer link. Under which configuration mode is RIPng enabled? A. Global B. Router C. Interface D. IPv6 Answer: A Question: 2 Which three algorithms can you configure with the ip cef load-sharing algorithm command?(choose three) A. per-packed B. Tunnel C. per-destination D. Universal E. Per-source F. Include-port Answer: BDF Question: 3 How big is the smallest packet that will always be fragmented on a standard Ethernet network with default configuration? A. 1500 bytes B. 1800 bytes C. 2048 bytes D. 2100bytes Answer: A Question: 4 Where must a network engineer configure the ip helper-address command on a router? A. On the interface that will receive the broadcast B. On the interface that is closest to the destination DHCP server C. On the global configuration mode D. On the DHCP configuration

  3. Answer: A Question: 5 Which STP feature can reduce TCNs on ports that are connected to end devices? A. BPDU guard B. Root guard C. PortFast D. BackboneFast Answer: C Question: 6 Which protocol does VRF-Lite support? A. IS-IS B. ODR C. EIGRP D. IGRP Answer: C Question: 7 What does stateful NAT64 do that stateless NAT64 does not do? A. Stateful NAT64 maintains bindings of IPv4 to IPv6 link-local addresses. B. Stateful NAT64 translates IPv4 to IPv6. C. Stateful NAT64 translates IPv6 to IPv4. D. Stateful NAT64 maintains bindings or session state while performing translation. Answer: D Question: 8 Refer to the exhibit.

  4. You notice that traffic from R1 to the 192.168.10 0/24 network prefers the path through R3 instead of the least- cost path through R2.What is the most likely reason for this route selection? A. OSPF prefers external routes over interarea routes. B. OSPF prefers interarea routes over intra-area routes. C. OSPF prefers external routes over intra-area routes. D. OSPF prefers intra-area routes over interarea routes Answer: D Question: 9 Which IP SLA operation can be used to simulate voice traffic on a network? CP connect B. UDP-jitter C. ICMP-echo D. ICMP-jitter Answer: B Question: 10 10. Device R1 has 1 Gigabit and 10 Gigabit Ethernet interfaces, which command do you enter so that it takes full advantage of OSPF costs? A. R1(config router) #auto-cost reference-bandwidth 10000 B. R1(config route-map) #set metric 10000000000 C. R1(config if) #ip ospf cost 10000

  5. D. R1(config router) #auto-cost reference-bandwidth 10000000000 E. R1(config if) #ip ospf cost 10000000000 F. R1(config route-map) #set metric 10000 Answer: A Question: 11 Which three methods can a network engineer used to fix a metric-based routing loop in the network?(choose three) A. Filter routes manually using prefix lists B. Implement proper network summarization on key routing points C. Utilize route database filters D. Filter routes based on tags E. Implement offset lists at network boundaries F. Filter routes manually using distribute lists Answer: D, E, F Question: 12 Which two statements about OSPFv3 are true?(choose two) A. The router ID is configured as an IPv6 address. B. It uses loopback IPv6 addresses to form neighbor relationships. C. The router ID is configured as an IPv4 address. D. It uses LSA type 6 for intra-area prefixes. E. It is backwards-compatible with OSPFv2 through the use of sham link. F. It uses link-local addresses to form neighbor relationships. Answer: C, F For more info: 300-101 Exam Dumps

More Related