1 / 20

New Humiseal Products

New Humiseal Products. Chris Brightwell. New Projects During 2012. 1R32 A2 673S – High Adhesion Acrylic 1B31 NS Gel – High performance gel for needle dispensing 1A33 NS – Toluene free polyurethane 1B58 – High Temp Synthetic Rubber 1C63 – UV Curable silicone

johana
Download Presentation

New Humiseal Products

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. New Humiseal Products Chris Brightwell

  2. New Projects During 2012 • 1R32 A2 673S – High Adhesion Acrylic • 1B31 NS Gel – High performance gel for needle dispensing • 1A33 NS – Toluene free polyurethane • 1B58 – High Temp Synthetic Rubber • 1C63 – UV Curable silicone • 1C49 LV – Low viscosity silicone • New range of masking tape and dots • Low Viscosity UV curable • AR6 water based

  3. 1R32 A2 673SHigh Adhesion Acrylic • Acrylic coatings have • Excellent electrical properties • Easy application • Easy repairs • Humiseal introduce 1R32 A-2 673S featuring: • Adhesion promoters for low surface energy boards • High clean solvent mixture for no-clean boards • Variants suitable for dip and selective coating • Available immediately

  4. 1R32 A2 673SHigh Adhesion Acrylic • Low surface energy can be caused by flux residues, or solder resist • Surface energy can change after wave solder or reflow • This board surface energy 34 – adhesion could be low

  5. 1R32 A2 673SHigh Adhesion Acrylic 1R32A-2 505 1R32A2 673S High adhesion acrylic performs better on low surface energy boards

  6. 1R32 A2 673SHigh Adhesion Acrylic AB Chimie AVR80 Humiseal 1R32A-2 673S Performs well compared to typical competitor material

  7. 1B31 NS GelHigh Performance Gel • Humiseal manufacture various acrylic gels for automated needle and hand dispensing • New 1B31NS gel: • Available in 55ml cartridges for simplified dispensing • Improved solvents to maximise cartridge shelf life • Increased flexibility minimises cracking • Humiseal 1B31NS gel is available immediately

  8. New Urethane Conformal Coatings • Urethanes are excellent coatings • Easy solvent application • Excellent chemical resistance • Low cost coatings • 1A33 NS • Solvent modified – No Toluene • Improved performance in corrosion ‘BONO’test • All other performance as for 1A33 • Pre-blends available immediately

  9. New Silicone Conformal Coatings • Silicones are: • Highly tough, flexible coatings • Good thermal shock performance • Hi temperature stability • Humiseal are introducing some new classes of Silicone product • 1C49 LV • 1C63 UV curable

  10. 1C49 LVLow Viscosity Silicon Coating • Humiseal Introduce 1C49LV: • 500 CPS formulation. • Suitable for Asymtek/PVA application. • Solvent Free formulation • Moisture cure – complete after 60 minutes • Hi temperature stability

  11. 1C63UV Curable Silicon Coating • Humiseal Introduce 1C63: • New UV curable formulation • Successful cure with standard UV ovens • Secondary Moisture Cure for shadow areas • 2000 CPS formulation. • Suitable for spray application • Hi temperature stability

  12. New Synthetic Rubber Conformal Coatings • Synthetic rubber coating have: • Excellent flexibility • Good temperature stability • Easy, solvent based application • Humiseal introduce 1B58 • Low modulus – suitable under BGA devices • Increased flexibility • Higher temperature rating – specified to 140oC

  13. New UV Curable Conformal Coatings • LV UV coating in development for use with Asymtek Film Coater • Product will have: • Low Viscosity ~ 65CPS • Dual cure mechanism • Improved electrical insulation • High thermal stability • Good adhesion to metal, plastic, resins • Good thermal shock performance • Hi Cure speed

  14. New UV Curable Conformal Coatings Driving Forces for Low Viscosity UV Conformal Coating Development • Speed: • High through-put coating equipment can only work with low viscosity materials • Accuracy • Film coater gives sharp edge definition, hence good accuracy

  15. New Water-Based Conformal Coatings • New Acrylic Polyurethane hybrid coating suitable for dip coating –AR6 • Product will have: • Low Viscosity ~ 80CPS • Fast Cure – improved compared with AR1 • High chemical stability • Good compatibility with no clean processes • Already used in Japanese Automotive

  16. New Masking Materials • New range of Tapes and Dots • Silicone free adhesive • Solvent resistant • Black tapes/dots are Antistatic

  17. New Products - Status • Available Immediately for samples: • 1R32A-2 673S • 1B31 NS Gel • 1B58 • 1C49LV • 1C63 • Masking Materials • Projects to complete this year • New LV UV • AR6

  18. Product Selector

  19. Compatibility Testing Service • Humiseal test compatibilities between Pastes, Coatings and Fluxes • Customer supplies paste/flux • Humiseal can measure SIR, adhesion, corrosion • Report supplied showing advantages and recommendations

  20. Future Projects • Which areas do you see growth • Which products do you like • What performance issues do you see?

More Related