1 / 12

NSTX Center Stack Joint Design and Analysis

NSTX Center Stack Joint Design and Analysis. Presented by P. Heitzenroeder. Outline. A Review of the Machine General Arrangement Center Stack Loads Reaction of Center Stack Loads The Original Analysis Why Did Failure Occur? Planned Design Improvements Summary. NSTX General Arrangement.

ken
Download Presentation

NSTX Center Stack Joint Design and Analysis

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. NSTX Center Stack Joint Design and Analysis Presented by P. Heitzenroeder

  2. Outline • A Review of the Machine General Arrangement • Center Stack Loads • Reaction of Center Stack Loads • The Original Analysis • Why Did Failure Occur? • Planned Design Improvements • Summary

  3. NSTX General Arrangement

  4. CS Hub Region Details

  5. Description of CS Loads 1. Vertical load from flexible connector between outer TF legs and flags. 2. Lateral loads on flags due to ITF x Bz 3. Vertical loads on flags due to ITF x Btf 4. Torque on TF bundle due to ITF XBOH • 5. Torques on TF bundle due to ITF XBPF1A

  6. Description of CS Loads(continued) Load (6) Gravity loads (ie, weight of TF CS leg bundle, OH coil, PF 1 coils, vacuum shell). Load (7) OH and PF coil EM loads Load (8) Loads to thermal expansion. Load (9) Lateral loads on the CS due to halo current asymmetry.

  7. Reaction of Vertical Loads (1) and (3) on Flags 1 • Vertical Loads (1) and (3) are reacted by tightly shimming the flags top and bottom to a hub structure. • Ideally the hub will react the moment, leaving only vertical loads to be reacted. • Vertical loads reacted at joint interface and at torque collar. 3

  8. (2) Lateral Loads on Flags • Flags are wedged in the hub structure to create a solid disc-like assembly. • 2 load paths to react net torque on the hub structure: • At the interface between the flag and CS TF conductor; • To the VV via the spline (top) or torque plate(bottom). Wedge Flag

  9. Reaction of Torques (4) and (5) on Center Stack TF Bundle • The torques imposed on the center stack (22480 ft-lbs.) are reacted by “grabbing” the CS by collars at both ends of the solenoid. • Collars are connected to hub structures which in turn react the torque through the vacuum vessel via a spline. • The spline permits free axial thermal growth of the center stack. Center stack Collar

  10. Load (6): Gravity Loads Load (6): The weight of the CS, OH, and PF coils are supported on a pedestal on the bottom of NSTX.

  11. Avoidance of Thermally Induced Loads (8) • Flexible links between outer TF coil legs and CS TF bundle permits vertical thermal expansion.

  12. (9) Lateral Loads on CS Bundle • Lateral loads due to halo currents were found to be benign. • A guide structure at the upper end ois provided to assure vertical alignment.

More Related