1 / 14

Lab 8: Soil Testing and Organic Matter

Lab 8: Soil Testing and Organic Matter. Today. 3 Tests: 1) Phosphorus test: recommend P fertilizer 2) pH/lime test: recommend Lime 3) Humus content: fertility assessment. Soil Test: Phosphorus. Purpose – estimate P-supplying capacity of a soil, need for P fertilizer

kennethdean
Download Presentation

Lab 8: Soil Testing and Organic Matter

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Lab 8: Soil Testing and Organic Matter

  2. Today 3 Tests: 1) Phosphorus test: recommend P fertilizer 2) pH/lime test: recommend Lime 3) Humus content: fertility assessment

  3. Soil Test: Phosphorus Purpose – estimate P-supplying capacity of a soil, need for P fertilizer • Deficiency : stunted, thin-stemmed plants with bluish-green dark foliage • Sufficient: photosynthesis, nitrogen fixation, flowering, fruiting, seed production, maturation, and root growth.

  4. Soil Test Phosphorus • Rinse all glass ware in deionized water • Weigh 5.0 g soil , Add to 40 mL plastic tube • Add extract- 30 mL dilute double acid (HCl and H2SO4), cap tightly and shake 5 min. • Filter immediately using FAST (No. 1) filter paper

  5. Soil Test Phosphorus • Transfer 2 mL solution into 50 mL volumetric flask • Add 20 mL of deionzed water and mix • Pump in 8mL of molybdate reagent • Add deionized water to 50 mL, seal with parafilm, and invert

  6. Soil Test Phosphorus • Wait 10-15 min. for color to react • Tansfer to cuvette (used in the colorimeter) • Discard contents down the drain and rinse glassware

  7. Soil Test Phosphorus • Molybdate (MoO4)- forms a bright blue-colored chemical complex with PO4 • Intensity can be measured by colorimeter • Use standard curve to find concentration of PO4 • Standard curve made by plotting absorbance reading on colorimeter vs. know concentrations of P

  8. Calculations • Copy absorbance readings and concentrations (plot on attached graph to obtain standard curve • Draw a straight line thru zero that best fits the points to get ppm (mg P/L) in solution • mg P/L x 0.03L/0.005 kg = mg P / kg ( ppm in soil) • mg/kg = ppm x 2 = lbs/a • Use calibration table in lab to rate the soil and make a fertilizer recommendation for P

  9. Lime Requirement Soils in the Southeast are acidic due to leaching over geologic time and N fert. Lime (CaCo3) is added to soils to bring the pH back to optimum levels (5.5-7.0) for crop growth Buffering capacity- soils ability to resist pH change determined by exchanageable acids (CEC) and pH dependant (CEC/AEC on oxides and humus)

  10. Lime Requirement Soil pH – 20 g of soil (in paper cup) + 30 mL of DI water - Allow to sit for 15 min. Measure pH with glass electrode (swirl cup gently) If pH is < 6.5, need lime to raise pH Add 2 mL Ca(OH)2 solution , wait 15 min., reread pH (limed pH)

  11. Lime Requirement • On graph, plot water pH and limed pH vs. ppm CaCO3 added (mg CaCO3/kg soil) • Draw a line through the two points, this is the buffer curve for your soil; read off ppm CaCO3 needed to reach target pH • Multiply this by 4 to get lbs ag lime to add per acre

  12. Organic Matter (Humus) • Special test (not routine) • Solubilize humus using sodium pyrophosphate (high pH, extracts humus from clay-organic complexes) • 1.00 g soil in centr. tube; pump in 30 mL Na4P2O7 • Shake about 5 min; centrifuge. • Filter thru FINE (No. 42) filter paper in a 100 mL cylinder till you collect 10 mL. • Dilute to 100 mL with water; read absorbance on spectrometer. Use calibration curve to get % organic C.

More Related