1 / 5

KOHLER Continuous Two-drum Surface Winder

KOHLER Continuous Two-drum Surface Winder. Kohler Two-drum Winder. Features: • Winds on 3 inch (75mm) or larger cores • New Core Accelerator • Advanced Cut Knife System cuts within 2 inches (50mm) of the core • Large Diameter – 23¾ inches diameter drums

kisha
Download Presentation

KOHLER Continuous Two-drum Surface Winder

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. KOHLER ContinuousTwo-drum SurfaceWinder

  2. Kohler Two-drum Winder • Features: • •Winds on 3 inch (75mm) or larger cores • •New Core Accelerator • •Advanced Cut Knife System cuts within 2 inches (50mm) of the core • •Large Diameter – 23¾ inches diameter drums • •Airshafts retained by Fail-Safe Locking Clamps at all times • •Cross-Machine Timing of Moving Components by Rugged Anti-Backlash Gearing • •Integral Suction Roll for Web Stabilization

  3. Kohler Two-drum Winder Features: •Individual Motor Drives for each drum •Programmable Torque and Hold Down Loading Relative to Diameter •Offset Drums for better Winding Characteristics •Dual Hold Down Roll Systems •Load Cells for Tension Feed •Massive Rectangular Tube Side Frames •Precision Bearings and Machine Tool Slides used throughout

  4. Kohler Two-drum Winder Benefits: •Tightly Wound Concentric Rolls •+/- 0.030 inch (0.75mm) Edge Control •Tail is 3 inches (75mm) or less, cut cleanly and folded back evenly on turn up •Winder is not Tension Limited – can pull up to 20 PLI (3.6kg/cm) even during transfer to new core. •Can wind finished, slit rolls without rewinding

  5. Kohler Two-drum Winder Options: •Semi-Automatic Shaft Handling Equipment •Inline Slitting and/or Edge Trim •Dual Spreader Rolls CSI KOHLER COATING 10995 Wright Road NW Uniontown, OH 44685 Phone: (330) 499-1407 • FAX: (330) 499-6617 E-mail: info@kohlercoating.com • Web Site: www.kohlercoating.com

More Related