1 / 17

CCNA Voice 640-461 Cert Guide

This chapter provides step-by-step instructions on configuring HTTP/HTTPS access for Cisco Configuration Professional. Learn how to enable and secure the HTTP server, set up local authentication, configure telnet and SSH access, and set up DHCP for your network.

kpitt
Download Presentation

CCNA Voice 640-461 Cert Guide

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. CHAPTER 4 Getting Familiar with CME Administration CCNA Voice 640-461 Cert Guide

  2. Setting up HTTP/HTTPS access for Cisco Configuration Professional: Voice_HM(config)#ip http server Voice_HM(config)#ip http secure-server Voice_HM(config)# *Sep 23 17:35:30.149: %PKI-4-NOAUTOSAVE: Configuration was modified. Issue "writ e memory" to save new certificate Voice_HM(config)#username Admin privilege 15 secret cisco Voice_HM(config)#ip http authentication local Voice_HM(config)#line vty 0 4 Voice_HM(config-line)#login local Voice_HM(config-line)#transport input telnet ssh Voice_HM(config-line)#int fa0/0 Voice_HM(config-if)#ip address 200.0.0.1 255.255.255.0 Voice_HM(config-if)#ip dhcp excluded-address 200.0.0.1 Voice_HM(config)#ip dhcp pool OUTSIDE Voice_HM(dhcp-config)#network 200.0.0.0 255.255.255.0 Voice_HM(dhcp-config)#default-router 200.0.0.1 Voice_HM(dhcp-config)#exit Voice_HM(config)#

  3. End of Chapter 4

More Related