1 / 10

Lecture Objectives:

Lecture Objectives:. Model processes in AHU Use eQUEST predefined models Use detail modeling Define your topics for your final project. Where to look for info about eQUEST simulation tool . You will find more info about eQUEST at: eQUEST help file

latif
Download Presentation

Lecture Objectives:

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Lecture Objectives: • Model processes in AHU • Use eQUEST predefined models • Use detail modeling • Define your topics for your final project

  2. Where to look for info about eQUEST simulation tool You will find more info about eQUEST at: • eQUEST help file • User manual http://www.doe2.com/download/equest/eQUESTv3-Overview.pdf • Detail manual http://www.doe2.com/download/DOE-22/DOE22Vol1-Basics.pdf • eQUEST user blog http://www.doe2.com/equest/

  3. eQUEST HVAC Models • Predefined configuration (no change) • Divided according to the cooling and heating sources • Details in e quest help file: For example: DX CoilsNo Heating • Packaged Single Zone DX (no heating) • Packaged single zone air conditioner with no heating capacity, typically with ductwork. • Split System Single Zone DX (no heating) • Central single zone air conditioner with no heating, typically with ductwork. System has indoor fan and cooling coil and remote compressor/condensing unit. • Packaged Terminal AC (no heating) • Packaged terminal air conditioning unit with no heating and no ductwork. Unit may be window or through-wall mounted. • Packaged VAV (no heating) DX CoilsFurnace • Packaged direct expansion cooling system with no heating capacity. System includes a variable volume, single duct fan/distribution system serving multiple zones each with it's own thermostatic control. • Packaged Single Zone DX with Furnace • Central packaged single zone air conditioner with combustion furnace, typically with ductwork. • Split System Single Zone DX with Furnace • Central single zone air conditioner with combustion furnace, typically with ductwork. System has indoor fan and cooling coil and remote compressor/condensing unit. • Packaged Multizone with Furnace • Packaged direct expansion cooling system with combustion furnace. System includes a constant volume fan/distribution system serving multiple zones, each with its own thermostat. Warm and cold air are mixed for each zone to meet thermostat control requirements.

  4. Building Heating/Cooling System Plant Integration of HVAC and building physics models Load System Plant model Building Qbuiolding Heating/Cooling System Q including Ventilation and Dehumidification Plant Integrated models

  5. Schematic for model of simple air handling unit Mixing box m - mass flow rate [kg/s], T – temperature [C], w [kgmoist/kgdry air], r - recirculation rate [-], Q energy/time [W]

  6. Energy and mass balance equations for Air handling unit model – steady state case The energy balance for the room is given as: mS is the supply air mass flow rate cp- specific capacity for air, TRis the room temperature, TS is the supply air temperature. The air-humidity balance for room is given as: wRand wS are room and supply humidity ratio - energy for phase change of water into vapor The energy balance for the mixing box is: ‘r’ is the re-circulated air portion, TO is the outdoor air temperature, TM is the temperature of the air after the mixing box. The air-humidity balance for the mixing box is: wOis the outdoor air humidity ratio and wM is the humidity ratio after the mixing box The energy balance for the heating coil is given as: The energy balance for the cooling coil is given as:

  7. Non-air system Radiant panel heat transfer model

  8. Non-air system Radiant panel heat transfer model The total cooling/heating load in the room The energy extracted/added by air system The energy extracted/added by the radiant panel: The energy extracted/added by the radiant panel is the sum of the radiative and convective parts: The radiant panel energy is:

  9. Building Heating/Cooling System Plant Integration of HVAC and building physics models Load-System-Plant model does not work in cases when HVAC components radiate to other surfaces We have to use Integrated models: Qrad_plant T surrounding surfaces Tw_out T surrounding surfaces mw, Tw_in External weather parameters Solve simultaneously system of equation or use iterative procedure.

  10. Final project topics: Software based • Energy analysis of building form Integrated design course, • Envelope analysis of glass buildings • …. Detail Modeling (your model) • Heat recovery systems, • Economizers, • Water cooled chiller, • Geothermal heat pump, • Solar hot water systems, • Mass transfer (moisture, ozone, VOCs,…) • Vented cavity walls - exam problem • …. Your ideas

More Related