1 / 9

Diversified Air Systems,Inc. Firetrace Technology

Diversified Air Systems,Inc. Firetrace Technology. Call today: 800-264-8958. What is Firetrace?. Suppression for the “micro-environment” Pneumatic heat detection Fire suppression system “Total flooding” OR “Local application” Detection and suppression at the ignition point.

lea
Download Presentation

Diversified Air Systems,Inc. Firetrace Technology

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Diversified Air Systems,Inc.Firetrace Technology Call today: 800-264-8958

  2. What is Firetrace? • Suppression for the “micro-environment” • Pneumatic heat detection • Fire suppression system • “Total flooding” OR “Local application” • Detection and suppression at the ignition point

  3. “It’s All About the ………………TUBE” • Linear, pneumatic flame detection • Bursts at 212°F (100°C) • Tubing can be the detector & the piping network • Tubing is durable and flexible • Tubing is notconductive or corrosive • Good for harsh chemical environments

  4. Direct System Direct Low Pressure System

  5. Characteristics of the Firetrace Detection Tubing • Commercial Name : FT 1992 Thermoplas • Physical Appearance: 6mm OD red tube • Change in Physical state: Melts @ 194 C (381.2 F) • Bulk Density : 17g / meter (5.18g/ft) • Dielectric Strength: (DIN 53481)kV/mm dry 40 • Thermal Decomposition: Above 300 C (572 F) • Temperature at Burst: 100-115 C @ 150 psi • (212-239 F @ 150 psi)

  6. The “Burst”

  7. Direct Low Pressure (DLP) System • Tubing is used as a detector and delivery of agent from cylinder • Valve is a X-over only to allow for connection of the tubing to cylinder • 4 ports on this valve for gauge, P/S, Ball Valve and cylinder Max 3.3 ft / layer • Discharge time is limited due to the x-sectional area of the ball valve orifice.

  8. DLP (Direct Low Pressure) System

  9. OPTIONS PRESSURE SWITCH • Monitors pressure in the tubing and in cylinder • Can use one on cylinder and as many as needed on tubing network • Used for: • Building alarm tie-in • Power lock-out or shunt trip • Fan/damper control • Auxiliary controls

More Related