1 / 13

Simulink Based Robot Arm Control Workstation

Simulink Based Robot Arm Control Workstation. By Adam Vaccari and Kain Osterholt Advisor: Dr. Dempsey 12/02/04. Presentation Outline. Project Summary Overall Block Diagram Subsystems Experimental Results/Verification SimMechanics Projected Schedule. Project Summary.

leightonm
Download Presentation

Simulink Based Robot Arm Control Workstation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Simulink Based Robot Arm Control Workstation By Adam Vaccari and Kain Osterholt Advisor: Dr. Dempsey 12/02/04

  2. Presentation Outline • Project Summary • Overall Block Diagram • Subsystems • Experimental Results/Verification • SimMechanics • Projected Schedule

  3. Project Summary The design of a software-based control workstation using Simulink and MATLAB with the Quanser SRV02 robot arm system modeled in the SimMechanics toolbox

  4. Overall Block Diagram

  5. Input Subsystem • Joystick Control – Input signal from Microsoft Sidewinder 2 Force Feedback Joystick • Software Control – Consists of test signals generated from software

  6. Plant Subsystem La – Armature Inductance Kt – DC motor torque constant Kv – DC motor back EMF constant J – Mechanical Inertia B – Mechanical Resistance

  7. Controller Subsystem F – Feed forward controller Gc – PID (Proportional Integral Derivative) controller Gp – Quanser Robot Arm Subsystem H – Position Sensor A/D D/A – Analog and Digital PC interface

  8. Experimental Results • Created linear model of DC motor and gear train in Simulink • Designed proportional controller • Gathered step response percent overshoot vs. Kp

  9. Graphical Results Experimental Step Response Simulink Step Response Kp=0.3

  10. SimMechanics Generic Inverted Robot Arm Model

  11. MATLAB Graphics

  12. Schedule

  13. Questions?

More Related