1 / 18

OMI follow-on Project Toekomstige missies gericht op troposfeer en klimaat

OMI follow-on Project Toekomstige missies gericht op troposfeer en klimaat. Pieternel Levelt, KNMI. Importance of Tropospheric Measurements. Tropospheric chemical science has very strong links to:. Climate Air quality Anthropogenic influence. Troposphere.

Download Presentation

OMI follow-on Project Toekomstige missies gericht op troposfeer en klimaat

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. OMI follow-on Project Toekomstige missies gericht op troposfeer en klimaat Pieternel Levelt, KNMI

  2. Importance of Tropospheric Measurements Tropospheric chemical science has very strong links to: • Climate • Air quality • Anthropogenic influence

  3. Troposphere • Next challenge for satellite instrument development is to map the troposphere for air quality monitoring and climate research: • Tropospheric measurements needs: • higher spatial resolution • improved accuracy for O3, NO2, aerosols, clouds, HCHO • together with CO, CH4, CO2 and H2O • improve aerosol information • improve time-resolution • preference for daily global coverage(air quality) GOME Observations of Formaldehyde over North America Chance et al., Geo. Res. Let. 27, 3461-3464, 2000.

  4. (tropospheric) Ozone Aerosols (tropospheric) NO2 SO2 Formaldehyde BrO UV/VIS CO CH4 CO2 H2O NIR Tropospheric Important Trace Species

  5. Why these trace species? I • Ozone is a toxicgreenhouse gas. • Small aerosols are toxic, have direct & indirect global warming effects. I I I • CO indicates combustion; has a chemical role (CO2, CH4) • HCHO indicates VOCs; has role in O3 & aerosols • NO2 indicates NOx; is precursor to O3 & aerosols • SO2 traces combustion, is major aerosol precursor • CO2 is an important greenhouse gas • H2O is an important greenhouse gas

  6. Climate Forcing Source: IPCC

  7. Currently available or selected tropospheric-climate missions Few measurements from space to date: except: • MOPITT CO, TOMS residual O3, GOME NO2, BrO, HCHO, MODIS for aerosols and clouds • TES and OMI (Aura) and SCIAMACHY (ENVISAT) will provide many new measurements • Selected OCO NASA mission (2007): Measures CO2 with 1 km2 pixels and 10 km swath. • However: Tropospheric chemical science needs more and more accurate measurements

  8. OMI on EOS Aura • Spectrometer in wavelength range 270 – 500 nm • Daily Global Coverage • Small Ground Pixels (13x24 km2) • Polarization Scrambler

  9. OMI Measurement Principle Courtesy of Dutch Space

  10. New Developments for Polar missions • Smaller Ground Pixels (will also improve accuracy) • Extending the Wavelength Range (add IR-channel) • Multi-Angle Viewing (for improved aerosol detection) • Assumption: Start from current Leo-OMI optical design: This means that a smaller spatial resolution of 10 x 10 km2 is not feasible, since this is the optical resolution of the instrument in polar orbit!

  11. Chosen for a module approach: • OMI/SCIAMACHY + instrument is by itself a very complete tropospheric instrument • Depending on missions, channels can be adjusted or skipped

  12. Requirements UV/VIS • Ground pixels: decreased to 12 x 13 km2 (except for UV-1, 40 x 40 km2) • Spatial sampling: 3 x • 270 - 500 nm, preferred extension to 600 nm (O3 and O2-O2) • Spectral resolution: minimal OMI, preferred GOME • Spectral sampling: 3 x • Daily global coverage • S/N ratios same as in OMI SRD, except for O3 and NO2 column

  13. Requirements NIR • Ground pixels: 12 x 13 km2 • Spatial sampling: 3 x • 1,6 (CH4 and CO2) and 2,4 mm (CO) • O2A band detection for airmass factor (760 nm) • Spectral resolution: 0.08 nm (CO2), 0.15 nm (CO & CH4) and 0.08 nm for O2A band • Spectral sampling: 3 x • Daily global coverage for CO, for CH4 and CO2 not necessary (1000 km swath) • S/N ratios: see input SRON

  14. Technical Challenges Identified • Size of instrument: • - NIR increases size of instrument • - High spectral resolution in combination with high spatial resolution and broad swath • S/N: smaller pixels and same or increased S/N is needed ! • CCD’s: CCD with preferred requirements at this moment non-existent; techniques to built it are however available • Scrambler for polarisation insensitivity optimal for UV/VIS and IR • Grating: New developed grating needed in order to decrease size of instrument • Temperature control of instrument, especially 2,4 mm • And more can follow ….. Caveat: in case higher spatial resolution is needed for tropospheric trace gases to obtain needed accuracy.

  15. 6 options UV/VIS and IR now studied by industry (1) Climate mission: Complete UV/VIS and CO, CO2, CH4 and O2A (2) Air Quality mission: Complete UV/VIS and CO (3) Climate mission with 1000 km swath for NIR and O2A (4) Climate mission as (1), without CO (5) Same as (3) but with 2 telescopes (6) Same as (1) but with 1000 km swath

  16. Monitoring Aerosol Mean aerosol optical depth in August 1997 (monthly average). Retrieved from ATSR-2 image (see Gonzalez et al., Geophys. Res. Lett., 27, 955-958, 2000 )

  17. Aerosol retrieval • Use dual viewing concept for info on surface albedo for aerosol retrieval and AMF information for trace gas retrieval • - Current OMI for nadir • - Add one viewing angle looking forward • - Need for an extra CCD for forward looking channel, and second telescope • Technical Challenge: calibration of those two channels with high accuracy! Not clear if this is feasible.

  18. Summary • OMI Technology is very suitable for remote sensing of the troposphere • - Spatial resolution can be improved to 10 x 10 km2 • - Wavelength range can be extended to NIR • High-level instrument requirements for UV/VIS and NIR are decided • Currently 6 possible instrument designs are studied on feasibility: many technical challenges are identified • Multi angle viewing seems to be more difficult than expected due to calibration difficulty • Caveat: in case higher spatial resolution is needed: new instrument design probably needed

More Related