1 / 39

Wireless, Mobile, Ad-Hoc Network Routing

Wireless, Mobile, Ad-Hoc Network Routing. Mario Gerla, UCLA CSD FOCUS 99. Outline: What is an Ad-Hoc Wireless Network The wireless routing challenge Review of proposed solutions (Distance Vector, Link State, On-Demand, Location Based) Simulation test bed Performance results.

linus
Download Presentation

Wireless, Mobile, Ad-Hoc Network Routing

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Wireless, Mobile, Ad-Hoc Network Routing Mario Gerla, UCLA CSD FOCUS 99

  2. Outline: • What is an Ad-Hoc Wireless Network • The wireless routing challenge • Review of proposed solutions (Distance Vector, Link State, On-Demand, Location Based) • Simulation test bed • Performance results

  3. Cellular vs Multihop Standard Base-Station Cellular Networks Instant Infrastructure, Multihop wireless Networks

  4. Ad-Hoc Network Characteristics • Instantly deployable, reconfigurable infrastructure • Node mobility • Heterogeneous nodes (big/small; fast/slow etc) • Heterogeneous traffic (voice, image, video, data) • Limited battery power • Multihopping ( to save power, overcome obstacles, enhance spatial spectrum reuse, etc.)

  5. Ad-Hoc Network Applications • Disaster Recovery (flood, fire, earthquakes etc) • Law enforcement (crowd control, border patrol etc) • Search and rescue in remote areas • Sport events, festivals • Ad hoc nomadic, collaborative computing • Indoor network appliances • Sensor networks • Battlefield

  6. Wireless multihop routing challenges • mobility • need to scale to large numbers (1000's) • unreliable radio channel (fading etc) • limited bandwidth • limited power • need to support multimedia (QoS)

  7. Proposed Routing Approaches • Conventional wired-type schemes (global routing, proactive): • Distance Vector; Link State • Hierarchical (global routing) schemes: • Fisheye, Hierarchical State Routing • On - Demand, reactive routing: • Source routing; backward learning • Location Assisted routing (Geo-routing): • DREAM, LAR etc

  8. Conventional wired routing limitations • Distance Vector (eg, Bellman-Ford): • routing control O/H linarly increasing with net size • convergence problems (count to infinity); potential loops • Link State (eg, OSPF): • link update flooding O/H caused by frequent topology changes CONVENTIONAL ROUTING DOES NOT SCALE TO SIZE AND MOBILITY

  9. Distance Vector 0 Routing table at node 5 : 1 3 2 4 5

  10. 1 Link State Routing • At node 5, based on the link state packet, topology table is constructed: • Dijkstra’s Algorithm can then be used for the shortest path 0 {1} {0,2,3} {1,4} 3 2 {1,4,5} 4 {2,3,5} 5 {2,4}

  11. REMEDY #1: use hierarchical routing to reduce table size and table update overhead Proposed hierarchical schemes: • Fisheye (implicit hierarchy induced by "scope") • Hierarchical State Routing • Zone routing (hybrid scheme)

  12. Fisheye State Routing • Topology based routing • similar to link state (e.g., OSPF) • Routing information is periodically exchanged with neighbors only • similar to distance vector • Routing update frequency decreases with distance to destination • Higher frequency updates within a close zone and lower frequency updates to a remote zone • Highly accurate routing information about the immediate neighborhood of a node; progressively less detail for areas further away from the node

  13. 2 8 3 5 9 1 9 4 6 Hop=1 7 10 12 13 Hop=2 19 18 21 11 Hop>2 15 22 36 14 23 17 16 20 29 35 27 25 24 26 28 34 30 32 31 Scope of Fisheye

  14. Message Reduction in FSR LST HOP 0 LST HOP 0:{1} 1:{0,2,3} 2:{5,1,4} 3:{1,4} 4:{5,2,3} 5:{2,4} 1 0 1 1 2 2 0:{1} 1:{0,2,3} 2:{5,1,4} 3:{1,4} 4:{5,2,3} 5:{2,4} 2 1 2 0 1 2 1 3 LST HOP 2 0:{1} 1:{0,2,3} 2:{5,1,4} 3:{1,4} 4:{5,2,3} 5:{2,4} 2 2 1 1 0 1 4 5

  15. Hierarchical State Routing (HSR) • Main challenge: maintain/update the hierarchical partitions in the face of mobility • Solution: distinguish between “physical” partitions and “logical” grouping • physical partitions are based on geographical proximity • logical grouping is based on functional affinity between nodes (e.g., tanks of same battalion, students of same class) • Physical partitions enable reduction of routing overhead • Logical groupings enable efficient location management strategies using Home Agent concepts

  16. 3 1 Level = 2 2 3 1 Level = 1 4 2 8 9 6 3 1 Level = 0 10 11 7 5 4 HSR - physical multilevel partitions HSR table at node 5: DestID 1 6 7 <1-2-> <1-4-> <3--> Path 5-1 5-1-6 5-7 5-1-6 5-7 5-7 HID(5): <1-1-5> HID(6): <3-2-6> Hierarchical addresses (MAC addresses)

  17. HSR - logical partitions and location management • Logical (IP like) type address <subnet,host> • Each subnet corresponds to a particular user group (e.g., tank battalion in the battlefield, search team in a search and rescue operation, etc) • logical subnet spans several physical clusters • Nodes in same subnet tend to have common mobility characteristic (i.e., locality) • logical address is totally distinct from MAC address

  18. HSR - logical partitions and location management (cont’d) • Each subnetwork has at least one Home Agent to manage membership • Each member of the subnet registers its own hierarchical address with Home Agent • periodically/event driven registration; stale addresses are timed out by Home Agent • Home Agent hierarchical addresses propagated via routing tables; or queried at a Name Server

  19. On-Demand Routing Protocols • Routes are established “on demand” as requested by the source • Only the active routes are maintained by each node • Channel/Memory overhead is minimized • Two leading methods for route discovery: source routing and backward learning (similar to LAN interconnection routing)

  20. Existing On-Demand Protocols • Dynamic Source Routing (DSR) • Associativity-Based Routing (ABR) • Ad-hoc On-demand Distance Vector (AODV) • Temporarily Ordered Routing Algorithm (TORA) • Zone Routing Protocol (ZRP) • Signal Stability Based Adaptive Routing (SSA)

  21. Dynamic Source Routing (DSR) • Uses source routing instead of hop-by-hop routing • No periodic routing update message is sent • Nodes ignore topology changes not affecting active routes with packets in the pipe • The first path discovered is selected as the route • Two main phases • Route Discovery • Route Maintenance

  22. DSR - Route Discovery • To establish a route, the source floods a Route Request message with a unique request ID • Route Reply message containing path information is sent back to the source either by • the destination, or • intermediate nodes that have a route to the destination • Each node maintains a Route Cache which records routes it has learned and overheard over time

  23. Performance Evaluation Enviroment • PARSEC simulation enviroment • 100 nodes • 1000mx1000m square area • transmission range: 100m • channel data rate: 2 Mbps • random mobility model • UDP traffic between randomly selected node pairs • cluster-token MAC layer protocol • HSR • 2 level physical partition • 1 level logical groupings, number of logical subnets varies with network size • FSR • 2 level fisheye scoping • fisheye radius is 2 hops

  24. DSR - Route Maintenance • Route maintenance performed only while route is in use • Monitors the validity of existing routes by passively listening to acknowledgments of data packets transmitted to neighboring nodes • When problem detected, send Route Error packet to original sender to perform new route discovery

  25. Location-Aided Routing • Ko and Vaidya (Texas A & M) • Location assisted (requires GPS) • On-demand • No periodic messages • Works similar to DSR except LAR limits the flooded area of Route Requests using location information

  26. LAR (cont’d) • Scheme 1 • The source specifies a request zone which includes the source and the area where the destination may reside • Nodes within the request zone propagate Route Requests • Scheme 2 • The source specifies the distance between itself and the destination • Nodes forward Route Requests if their distances to the destination is less than or equal to the distance indicated by the packet

  27. DREAM • Basagni, et al. (U of Texas, Dallas) • Location assisted (requires GPS) • Coordinates of each node are recorded in the route table instead of route vectors • Distance Effect: Send location updates to nearby nodes more frequently • Location update frequencies are adjusted to mobility rate

  28. DREAM (cont’d) • The source partially floods data to nodes that are in the direction of the destination • The source specifies possible next hops in the data header using location information • Next hop nodes select their own list of next hops and include the list into data header • If the source finds no neighbors in the direction of the destination or has no fresh location information of the destination, data is flooded to the entire network

  29. Application Processing Application Setup Application RTP Wrapper RCTP Transport Wrapper TCP/UDP Control Transport RSVP IP Wrapper IP IP/Mobile IP Routing VC Handle Flow Control Routing Clustering Packet Store/Forward Network Link Layer Packet Store/Forward Ack/Flow Control Clustering MAC Layer Frame Wrapper RTS/CTS CS/Radio Setup Frame Processing Radio Status/Setup Radio Propagation Model Mobility Channel GloMoSim Simulation Layers Control Plane Data Plane

  30. Control O/H vs. number of nodes

  31. Control O/H vs. Traffic Pairs

  32. Control O/H vs. Mobility (100 pairs)

  33. Average Delay (ms)

  34. Location Based Routing Simulation (LAR and DREAM) • 50 nodes; 750m X 750 m space • Free space channel propagation model • Radio with capture ability • MAC: IEEE 802.11 DCF • 10 UDP data sessions with constant bit rate

  35. Simulation Results • Number of data packets transmitted per data packet delivered

  36. Simulation Results (cont’d) • Number of control bytes transmitted per data byte delivered

  37. Simulation Results (cont’d) • Packet delivery ratio

  38. Conclusions • Conventional (wired net) routing schemes suffer of O/H, mobility and scalability limitations • Hierarchical routing reduces O/H and improves scalability (at the expense of accuracy). • On Demand routing eliminates background routing control O/H. It introduces latency; it does not support QoS routing

  39. Conclusions (cont’d) • Location assisted routing can enhance performance in both on demand (LAR) and table driven (DREAM) settings; GPS required. • No routing scheme works best in all situations; selection must be guided by application scenario • Open problem: efficient location management and resource discovery in highly mobile environment

More Related