1 / 60

Optical Fibre Communication

Optical Fibre Communication. Lecture delivered by Christie Alwis 2009 faculty of Applied Science for computer science , and physics special students. University of Sabaragamuwa , Belihuloya. For more details on this lecture, please visit www.christiealwis.com. Revolutions.

luigi
Download Presentation

Optical Fibre Communication

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Optical Fibre Communication • Lecture delivered by Christie Alwis • 2009 faculty of Applied Science for computer science , and physics special students. • University of Sabaragamuwa , Belihuloya. • For more details on this lecture, please visit www.christiealwis.com

  2. Revolutions • How it's going to be affected to the human being? • Industrial Revolution • Agricultural Revolution • Communication Revolution a.) can talk with the use of latest Technology @ any where in the world, @ low cost. b.) can be accepted knowledge @ anywhere in the world. (e- Assessment)

  3. Explosive Growth of Internet

  4. WHAT IS COMMUNICATION NETWORK Local Area Node Country A Domestic Transport Network (OF, IG Undersea Optical Fiber Networks International Transport Network IG Country B Both Domestic and International Transport will be on Optical Fibers. And Switching Nodes will be on NGN.

  5. BASIC COMPONENTS OF COMMUNICATION NETWORKS • Following 8 major components can be identified • Geographical Location & Terminal • Access Networks • Local Exchange • Domestic Transport Network • International Exchange • International Transport Network • Other Country International Exchange • Other Country Domestic Network (With the similar components as above)

  6. DEVELOPMENT OF ACCESS NETWORK TV Power Telephone ? • Radio Options: 3G, EvDO, WiMAX • xDSL, PON, and PLC Access Network is developed to accommodate integrated services such as Internet, IPTV, Data with Voice

  7. FTTH, PON(PASSIVE OPTICAL NETWORK)

  8. Theoretical capacities of other Medias • Cu=Short distance could for a 8Mbps Similarly : • Microwave radio=STM 16 =More than 2.5Gbps • Satellite=STM 1= 155.52 Mbps • Coaxial cable=Approximately 1.5 Gbps

  9. Basic Principles

  10. Principle of step & graded index fibers

  11. Attenuations in fibre

  12. Basic principle of dispersion • Dispersion is a little complex than attenuation • Dispersion is a process whereby optical pulses are widened as they travel along an optical fibre. It is caused by the different wavelength components of a light signal of finite spectral width traveling down the fiber at different velocities.The effect is a pulse at the terminating end of a fibre that is a wider than the original pulse that was transmitted.If the amount if widening is excessive, the individual pulses will not be distinguishable by the receiver. OUT IN

  13. Chromatic Dispersion • Variation of refractive index with wavelength of light • The two main underlying mechanisms, material dispersion and waveguide dispersion, naturally cancel one another, giving a zero dispersion point 0 • Control of the refractive index profile can place 0 anywhere in the 1300/1550nm wavelength range • The fibre characteristics are controlled by careful design of the chemical composition (doping) of the glass used • Dispersion is quoted in terms of the dispersion parameter ‘D’ with units ps/(nm.km) • An indication of the pulse broadening is given by: (D * (spectral width of the optical source) *(link distance))

  14. Optical transmission system concepts The basic components – A serial bit stream in electrical form is presented to a modulator, which encodes the data appropriately for fibre transmission

  15. Basic Concept of LED • Like a normal diode, the LED consists of a chip of semiconducting material impregnated, or doped, with impurities to create a p-n junction. As in other diodes, current flows easily from the p-side, or anode, to the n-side, or cathode, but not in the reverse direction. Charge-carriers—electrons and holes—flow into the junction from electrodes with different voltages. When an electron meets a hole, it falls into a lower energy level, and releases energy in the form of a photon.

  16. Contd…. • The wavelength of the light emitted, and therefore its color, depends on the band gap energy of the materials forming the p-n junction. In silicon or germanium diodes, the electrons and holes recombine by a non-radiative transition which produces no optical emission, because these are indirect band gap materials. The materials used for the LED have a direct band gap with energies corresponding to near-infrared, visible or near-ultraviolet light.

  17. Power ratio (Decibel;dB) • The decibel (dB) is a logarithmic unit of measurement that expresses the magnitude of a physical quantity (usually power or intensity) relative to a specified or implied reference level. Since it expresses a ratio of two quantities with the same unit, it is a dimensionless unit.

  18. Examples • To calculate the ratio of 1 kW (one kilowatt, or 1000 watts) to 1 W in decibels, use the formula • Similarly for amplitude ,current or voltage, (power is proportional to the square of the above 3 quantities. )

  19. Example 1

  20. Answer (Example 1) • Connector loss= 8*1dB= 8dB • Cable loss= (4*100)/1000=0.4dB • System margin = 5dB • Sensitivity= -30 dB • Transmitter Power = connector loss+cable loss+system margin+sensitivity • = 8+0.4+5-30= -16.6dB Transmitter Receiver 8 Connectors

  21. Example 2

  22. Answer (Example 2) Transmitter Receiver 2 Connectors • Connector loss= 2*1.5dB = 3 dB • Cable loss= 0.4dB * 50 = 20 dB • System margin = 8 dB • Sensitivity= -34 dB • Transmitter Power = connector loss+cable loss+system margin+sensitivity • = 3+20+8-34= -3 dB • No: of splices= 3/ 0.15 = 20 splices

  23. Example 3 (a)

  24. Example 3 (b)

  25. Example 3 (c)

  26. Example 3 (d)

  27. Example 3 (e)

  28. Example 3 (f)

  29. Example 3 (g)

  30. Example 3 (h)

  31. Optical fibre

  32. C=fλ C= 3* 108 m/s

  33. Future of optical fibre The following 2 major factors plays a vital role in designing the maximum capacity of an optical fibre • How far the digital multiplexing can be achieved • As at present , 488ns micro information of a bit pertaining to 2Mbps pcm stream will be shrinked to 25ps when it goes through stm 64 (10Gbps).If the technology improves to shrink less than 25ps , then the no of bits in the higher order pcm will be more than 10Gbps. • To transmit 10Gbps , the bandwidth required in the optical fibre is around 0.078ns = 78ps ( for 1 wavelength) • If the available bandwidth in the optical fibre is 200ns , the no; of wavelengths that can be produced is around 2400 , which will result in producing a total of 24Tbps. • Hence both time division multiplexing and dense wave division multiplexing can further improve the traffic carrying capacity of an optical fibre up to a total of 24Tbps.

  34. Overview of WDM

  35. Future scenarios Theoretical Maximum of an optical fibre cable No of wavelengths = ( 24 * 103 Gb ) / 10 Gb = 2400 wavelengths Transponders λ1 488 ns 25 ps 1 TDM Optical Fibre 2 λ2 2 Mbps 10Gbps λ2399 2399 Only 1 core is needed 2400 λ2400

  36. Further study of optical fibre network

More Related