1 / 11

PETR 464 Material Balance: Dry Gas

PETR 464 Material Balance: Dry Gas. Basic Definition. Application of the Law of Conservation of Mass to oil and gas reservoirs (Original hydrocarbon mass)-(produced hydrocarbon mass)=(remaining hydrocarbon mass). Material Balance Model. G p. GB gi. (G- G p ) B g. Initial Conditions P=P i.

malachi
Download Presentation

PETR 464 Material Balance: Dry Gas

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. PETR 464Material Balance: Dry Gas

  2. Basic Definition • Application of the Law of Conservation of Mass to oil and gas reservoirs (Original hydrocarbon mass)-(produced hydrocarbon mass)=(remaining hydrocarbon mass)

  3. Material Balance Model Gp GBgi (G-Gp)Bg Initial Conditions P=Pi Later Conditions P<Pi

  4. Basic Uses • Understand reservoir performance • Identify drive mechanism • Predict future performance • Estimate OGIP • Predict productions rates/pressure decline • Estimate ultimate recovery

  5. Basic Concepts Measured pressure Cumulative gas Production @ P Gas property, f(T,P,g) GRM-Engler-09

  6. Steps • Collect data: • Initial reservoir pressure • Various reservoir pressures throughout the life of the well • Associated cumulative production at each pressure • Determine z-factor for each pressure • Calculate P/z • Plot P/z versus GP • Draw a straight line through the data points. • Extrapolate the straight line to P/z = 0 • Obtain estimate of OGIP @ P/z=0: Gp must equal G • Estimate ultimate recovery @ abandonment pressure

  7. Example 1 Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Step 8 Step 7

  8. Variations • Water drive reservoir vs. gas expansion • Abnormally pressured reservoirs (formation compressibility) • Pressure measurements/calculations • Low permeability • Retrograde gas reservoir

  9. Comprehensive Gas Material Balance Geopressured component Gas in solution Water drive component Gas injection GRM-Engler-09

  10. Water Drive Reservoirs Cumulative water influx, rcf Cumulative water production, stb RF (water drive) < RF (depletion) 45 to 75% >75% GRM-Engler-09

  11. Gas expansion + Formation compaction + Water expansion (p/z)i p/z Gas expansion Overestimate of G Gp Abnormally Pressured Reservoirs Where, GRM-Engler-09

More Related