1 / 23

CM4110 Unit Operations Lab Measurement Basics

CM4110 Unit Operations Lab Measurement Basics. Fundamentals of Measurement and Data Analysis D. Caspary September, 2008. CM4110 Unit Operations Lab Measurement Basics. Outline: Principles of measurement Error Analysis “Propagation of error”.

maxima
Download Presentation

CM4110 Unit Operations Lab Measurement Basics

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. CM4110Unit Operations LabMeasurement Basics Fundamentals of Measurement and Data Analysis D. Caspary September, 2008

  2. CM4110Unit Operations LabMeasurement Basics Outline: • Principles of measurement • Error Analysis • “Propagation of error”

  3. CM4110Unit Operations LabMeasurement Basics Principles of Measurement • Nothing can be measured exactly • Measurements are approximations of true value of a characteristic or property • Associated with every measurement is “uncertainty” or “error”

  4. CM4110Unit Operations LabMeasurement Basics Principles of Measurement • Uncertainty is introduced thru Instrument Error (or Reading /Measurement Error) • Uncertainty is observed as fluctuations in replicated experimental data called Experimental Error

  5. CM4110Unit Operations LabMeasurement Basics Reporting Measured Values • Engineering and scientific reporting must be ethical and honest – always report appropriate estimate of uncertainty with the results • Learn/ Use appropriate statistical tools • Use common sense

  6. CM4110Unit Operations LabMeasurement Basics Example problem statement : “Calculate the overall heat transfer coefficient for a shell and tube heat exchanger.” How will Instrument and Experimental Error affect the calculated results?

  7. CM4110Unit Operations LabMeasurement Basics Planning your experimental strategy: What is known? from mfg. data, tables, etc. What do I need to measure? What instruments are available? • What is the precision of each instrument? • And, what about accuracyin measurements? • How will precision and accuracy of these instruments affect the calculated results?

  8. CM4110Unit Operations LabMeasurement Basics InstrumentError can show up as: • Systematic error – determinate (or fixed) error – defines accuracy • Random error – indeterminate error associated with the instrument – defines precision

  9. CM4110Unit Operations LabMeasurement Basics Accuracy and Precision are independent Accurate measurement – small systematic error Precise measurement – small random variation (random error)

  10. CM4110Unit Operations LabMeasurement Basics Poor Accuracy Poor Precision Poor Accuracy Good Precision Good Accuracy Good Precision Good Accuracy Poor Precision

  11. CM4110Unit Operations LabMeasurement Basics Reporting Instrument Error For analog scales Typically plus or minus ½ the smallest increment For digital readouts Report the value as displayed, then look up accuracy and precision spec’s in manufacturer’s data

  12. CM4110Unit Operations LabError Analysis Estimating Experimental Error – again, the Experimental Strategy Usually you will perform a set of experiments: • How many replicates of each test should you perform? • How will variation in each replicate affect the result?

  13. CM4110Unit Operations LabError Analysis Three Types of Experimental Error • Gross error – mistakes • Systematic error – determinate (or fixed) error. Correct this first! • Random error – indeterminate error. Use statistics to extimate.

  14. CM4110Unit Operations LabError Analysis … liars, damned liars, and statisticians… “Your goal is to present the Location and Dispersion of your results.” Wheeler and Chambers, Understanding Statistical Process Control, SPC Press, 1992

  15. CM4110Unit Operations LabError Analysis Location of Data • With three or more replicates typically report the Average • With a single value (or 2 values), report the value(s).

  16. CM4110Unit Operations LabError Analysis Dispersion of Data Range • Lowest value and highest value • Often used for small data sets • Easy to report Not used for our purposes as it hides data – says nothing about the dispersion of the “middle values”

  17. CM4110Unit Operations LabError Analysis Dispersion of Data RMS Deviation (aka Standard Deviation) • calculate the average for the sample set • calculate the deviation from the average for each value • square the individual deviations • sum all the squares of the deviations • find the average squared deviation • take the square root of the average squared deviation

  18. CM4110Unit Operations LabError Analysis Dispersion of Data Standard Deviation (aka Average Std. Dev.) • Calculate like RMS deviation except use (n-1) in the denominator when calculating the average squared deviation • As data set gets large, Std. Dev. approaches the value for RMS Dev.

  19. CM4110Unit Operations LabError Analysis Rules of Thumb • Be realistic (honest) in reporting the measurement error or uncertainty. • Normally report Average, Error, and sample size for UO Lab measurements • Do not hide data. • Do not allow yourself to adjust the results to match some “expected value”.

  20. CM4110Unit Operations LabError Analysis Discarding Data Bad Data • caused by obvious blunders • can be discarded if it has “assignable cause” “Unexplained” Data • cannot be discarded because it doesn’t meet our expectations • no assignable cause (is random) Any data filtering must be consistent and unbiased.

  21. CM4110Unit Operations LabPropagation of Error Estimating the error in your calculated results: • The Error in measured quantities that are arithmetically combined must also be combined. • Use standard practice for “propagating” error through calculations. • Error can be reported in EU’s or %.

  22. CM4110Unit Operations LabPropagation of Error Text References Understanding Statistical Process Control, 2nd edition, D.J. Wheeler, D.S. Chambers, SPC Press, 1992. Experimental Methods for Engineers, 3rd edition, J.P. Holman, McGraw-Hill, 1978. Data Reduction and Error Analysis for the Physical Sciences, P.R. Bevington, Mcgraw-Hill, 1969.

  23. CM4110Unit Operations LabPropagation of Error Web References http://science.widener.edu/svb/stats/error.html – shows how to arithmetically combine individual errors to get error in calculated result. http://www.upscale.utoronto.ca/PVB/Harrison/ErrorAnalysis/Propagation.html – propagation of error and error analysis for all situations Dr. Pintar’s Error Analysis Handout – link on course web page for definitions and a worked out example from actual UO Lab data

More Related