1 / 46

Sheet Silicates

Sheet Silicates. Abundant and common minerals throughout upper 20 km of crust Felsic to intermediate igneous, metamorphic, and sedimentary rocks All are hydrous Contain H Bonded to O to form OH- Z/O ratio of 2/5 2 Major groups: Micas & Clays. Groupings. Based on structure

nishan
Download Presentation

Sheet Silicates

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Sheet Silicates • Abundant and common minerals throughout upper 20 km of crust • Felsic to intermediate igneous, metamorphic, and sedimentary rocks • All are hydrous • Contain H • Bonded to O to form OH- • Z/O ratio of 2/5 • 2 Major groups: Micas & Clays

  2. Groupings • Based on structure • Two kinds of “layers” within the “sheets” • “T” layers – tetrahedral layers • Tetrahedral coordination of Si and Al • “O” sheets – octahedral layers • Octahedral coordination of mostly Al and Mg, occasionally Fe

  3. T and O layers bonded to form sheets • The sheets are repeated in vertical direction • The spaces between the sheets may be: • Vacant • Filled with interlayer cations, water, or other sheets • Primary characteristic - basal cleavage • Single perfect cleavage • Occurs because bonds between sheets are very weak

  4. Construction of T-O-T Sheets • Octahedral layers: • Two planes of OH- anionic groups • Cations are two types: • Divalent (Fe2+ or Mg2+) • Trivalent (Al3+ or Fe3+) • Mg and Al most common

  5. Divalent cations fill 3 of 3 sites • Form trioctahedral sheets • Ideal formula is Mg3(OH)6 • This formula is brucite • A hydroxide, not a silicate mineral All sites filled with divalent cations Charge neutral

  6. Trivalent cations fill 2 of 3 sites • Form dioctrahedral sheets • Ideal formula is Al2(OH)6 • Mineral called gibbsite • A hydroxide, not silicate mineral 2/3 of sites filled with trivalent cations Charge neutral

  7. Fig. 11-2 • Tetrahedral sheets • Sheets of tetrahedrally coordinated cations • Formula represented by Z2O5: Z/O = 2/5 • Z usually Si4+, Al3+, less commonly Fe3+ • Symmetry of rings is hexagonal • Symmetry of sheet silicates is close to hexagonal • Depends on arrangement of stacking

  8. Tetrahedron are meshes of 6-fold rings • Three basal oxygen on each tetrahedron shared by adjacent tetrahedron • The fourth, unshared oxygen is the apical oxygen • Tetrahedral layers are two oxygen thick

  9. Fig. 13-1 • Tetrahedral sheet composition is Si2O52- • May have Al3+ or Fe3+ substitute for Si4+ • Increases net negative charge

  10. Tetrahedral and octahedral sheets always joined • Apical oxygen of tetrahedral sheets formed part of octahedral sheets • Apical oxygen replaces one of the OH- in the octahedral sheets • Sheets joined in two ways • TO layers, called 1:1 layer silicates • TOT layers, called 2:1 layer silicates

  11. Al3+ (dioctahedral) or Mg2+ (trioctahedral) OH in middle of rings Basal Oxygen T layer on top (an example of 1:1 layer type) Fig. 13.1

  12. 1:1 layer summary • Consists of 3 planes of anions • One plane is basal plane of shared tetrahedral oxygen • Other side is the OH- anionic group of the octahedral sheet • Middle layer is the OH- anionic group with some OH- replaced by oxygen

  13. 1:1 layering in phyllosilicates OH- only OH- + oxygen Oxygen only Al2Si2O5(OH)4 = kaolinite, dioctahedral 1:1 sheet silicate Mg3Si2O5(OH)4 = serpentine, trioctahedral, 1:1 sheet silicate

  14. 2:1 layer silicates • 2 tetrahedral layers on both sides of octahedral layer • TOT structure has 4 layers of anions • Both sides (outermost) are planes of basal, shared oxygen • Middle planes contain original OH- from octahedral layers and apical oxygen from tetrahedron

  15. 2:1 layering in phyllosilicates Oxygen only OH- + oxygen OH- + oxygen Oxygen only Al2Si4O10(OH)2 = Pyrophyllite, dioctahedral 2:1 sheet silicate Mg3Si4O10(OH)2 = Talc, trioctahedral 2:1 sheet silicate

  16. How are sheets stacked? Kaolinite (dioctahedral) Serpentine (trioctahedral) • 1:1 layer • …T-O…T-O…T-O… • 2:1 layer • …T-O-T…T-O-T…T-O-T… • c…T-O-T…c…T-O-T…c…T-O-T…c… • O…T-O-T…O…T-O-T…O • Four types of layers, each dioctahedral or trioctahedral • Each one may be dioctahedral or trioctahedral Pyrophyllite (dioctahedral) Talc (trioctahedral)

  17. 1:1 layer silicates • Kaolinite and Serpentine • Bonding between sheets very weak • Electrostatic bonds – van der Waals and hydrogen • Results in very soft minerals • Thickness of TO layers around 7 Å

  18. C unit cell dimension about 7 Å Fig. 13.3

  19. 2:1 layer silicates • Unit structure is repeating TOT layers, two ways: • (1) TOT layers can be electrically neutral • Nothing in between sheets van der Waal forces • Pyrophyllite & Talc • (2) substitution in TOT layers can give a net charge • Most common substitution is Al3+ for Si4+ in tetrahedral layers • Charge balance maintained with substitution between the sheets

  20. TOT structure • If there is only Si4+ in T layers (no Al3+ or Fe3+) • Electrically neutral, no interlayer cations • TOT layers weakly bonded by van der Waal and hydrogen bonds • Soft (Talc), greasy feel

  21. C unit cell dimension about 9 to 9.5 Å Nothing in interlayer site Fig. 13.3

  22. c…T-O-T…c…T-O-T…c • These are the mica minerals • Also less common are “brittle micas” • Structure is TOT layers with 1 out of 4 tetrahedral sites occupied by Al3+

  23. Micas • Al/Si ratio in the tetrahedral layer is 1/3 • Dioctahedral TOT layer = Al2(AlSi3O10)(OH)21- • Remember Pyrophyllite: Al(Si2O5)(OH)2 • Trioctahedral TOT layer = Mg3(AlSi3O10)(OH)21- • Remember Talc: Mg3(Si2O5)(OH)2 • Negative charge balance by large monovalent cation, usually K+ • Bonds are ionic, fairly strong, harder minerals

  24. C unit cell dimension about 9.5 to 10 Å K+ in interlayer site

  25. Dioctahedral mica – muscovite • KAl2(AlSi3O10)(OH)2 • Trioctahedral mica – Phlogopite • KMg3(AlSi3O10)(OH)2

  26. Brittle Micas • Similar to micas, but more Al3+ substitution • Charge balanced by Ca2+ • Margarite – half of tetrahedral sites have Al3+ substitution • Clintonite – ¾ of tetrahedral sites have Al3+ substitution

  27. Margarite • Dioctahedral • CaAl2(Al2Si2O10)(OH)4 • Clintonite • Trioctahedral • CaMg2Al(Al3SiO10)(OH)2 • Now charge balance in part from Al substitution in octahedral layer

  28. …O…T-O-T…O…T-O-T…O… • Most common members are in the chlorite group • Structure like Talc, but with brucite (Mg3(OH)6) interlayer • T layers with small negative charge • Substitute small amounts of Al3+ for Si4+ • O layers often have net positive charge • Substitute Al3+ or Fe3+ for divalent cations • Minerals harder than expected

  29. Some Al3+ for Si4+ C unit cell dimension about 14 Å Some Al3+ for Mg2+ TOT layers have slight negative charge, substitute Al3+ for Si4+ O layers often have net positive charge Fig. 13.3

  30. Varieties of sheet silicates • TO structures • Serpentine (var. Antigorite, Chrysotile, Lizardite) • All are trioctahedral • Trioctahedral sheets, a = 5.4 Å; b = 9.3 Å • Tetrahedral sheets, a = 5 Å; b = 8.7 Å • Mismatched size leads to variations

  31. Fig. 13-5 Chrysotile (curved tubes) Antigorite (reversed direction) Lizardite (distorted tetrahedral mesh)

  32. Clay Minerals • Clay has two meanings: • Particles < 1/256 mm, or 0.0039 mm • A group of sheet silicate minerals (not micas) that are commonly clay-sized • Original description from not being able to identify small grain size material • Now can use X-ray diffraction to determine clays

  33. Terminology • Clay: Sediment composed of particles that are < 0.002 mm • Claystone: Rock composed of clay-sized particles • Clay minerals: 1:1 and 2:1 Phyllosilicate minerals without K+ or Ca2+ bonding sheets (those are Micas) • Argillaceous: Rock or sediment containing large amounts of clay and clay minerals

  34. Problems • Clay size fraction can contain other minerals (quartz, carbonates, zeolites etc.) • “Clay” used to define size fraction – size not mineralogical • Several clay minerals can be larger than the size requirements

  35. Clay classification • 1:1 layer clays • 7 Å type • TO layers • Kaolinite (dioctahedral) • Serpentine (trioctahedral)

  36. 2:1 layer clays: • End members: • 10 Å – Pyrophyllite (dioctahedral) & talc (trioctahedral) • 10 Å – Charge imbalance: with K as interlayer: Mica: Muscovite (trioctahedral) & Biotite (dioctahedral) • 14 Å type (Chlorite)

  37. Intermediate 2:1 clays • Have net negative charge, but less than one per formula • Requires less interlayer cations to charge balance • Mixed layer clays – combined 1:1 and 1:2

  38. Three types of intermediate 10 Å clays • Low charge imbalance – smectite clays • High charge imbalance – illite clays • Intermediate charge imbalance – vermiculite • Charge imbalance controlled by • “interlayer” cations • They move in and out – Cation Exchange Capacity (CEC) • Surface adsorption

  39. Low charge • Smectite • approximately = Ca0.17(Al,Mg,Fe)2(Si,Al)4O10(OH)2•nH2O • Net negative charge is 0.2 to 0.6 per formula unit, typically 0.33 • Ca and Na are typical interlayer ions • Exchangable • May be dioctahedral or trioctahedral • Charge results from • Al substitution for Si in tetrahedron • Mg for Al in octahedron (in dioctahedral)

  40. Low charge means water and cations (Na, K, Ca, Mg) easily move in and out of interlayer sites • No water = 10 Å • One water layer = 12.5 Å • Two water layer = 15.2 Å • Water moves in and out depending on moisture in environment

  41. High charge • Illite/glauconite • Approximately = K0.8Al2(Al0.8Si3.2)(OH)2 • Net negative charge of 0.8 to 1 per formula • Very similar to muscovite – called mica-like • Mostly substitute of Al3+ for Si4+ • All are dioctahedral; Glauconite has Fe3+ • Interlayer ion is K+ • High K concentration means strong bond • Difficult for water to enter • Non-swelling clay

  42. Intermediate charge • Vermiculite • Approximately = (Mg,Ca)0.3(Mg,Fe2+,Fe3+,Al)3(Si,Al)4)O10(OH)2 • About 0.6 charge per formula unit • Comes from oxidation of Fe2+ to Fe3+ in biotite • Reduces the negative charge on TOT layer from -1 to -0.6 • Less K+ than mica, can exchange for Ca2+ and Mg2+ and water • Swell clay • With water interlayer spacing is 14.4 Å

  43. Mixed layer clays • Natural clays rarely similar to the end members • Typically contain parts of different types of clays • Actually mixtures at unit cell level – not physical mixtures • Nomenclature – combined names • Illite/smectite or chlorite/smectite

  44. 7 Å 1:1 layer clays 2:1 layer clays – low charge, smectite 10 Å 2:1 layer clays – high charge, illite 2:1 layer clays – Chlorite gp 14 Å Mixed layer Figure 13-15

  45. Burial Diagenesis • Smectite converts to illite with burial • Most conversion at 50 to 100º C • Conversion requires K, usually comes from dissolution of K spar

  46. Mineralogy of Miocene/Oligocene sediments Gulf Coast • K-spar dissolves • Smectite converts to illite (with extra K) • Releases interlayer water • Increase pore pressures • T corresponds to “oil window” • Forces oil from pore spaces into reservoirs Figure 13-16

More Related