1 / 13

123D Catch ( AutoDesk )

3D Data Capture and Prototyping with 123D Catch and Make ( AutoDesk ) Sculpture courtesy Wang Xiangang Beijing, China May 2012. 123D Catch ( AutoDesk ). Using a standard DSLR camera, one can create a 3D model from multiple photographs. This is one of 50 images taken from multiple angles.

nolen
Download Presentation

123D Catch ( AutoDesk )

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 3D Data Capture and Prototyping with 123D Catch and Make (AutoDesk)Sculpture courtesy Wang XiangangBeijing, ChinaMay 2012

  2. 123D Catch (AutoDesk) Using a standard DSLR camera, one can create a 3D model from multiple photographs. This is one of 50 images taken from multiple angles. Sculpture courtesy Wang Xian Gang

  3. 123D Catch (AutoDesk) Software generates model from images taken from many camera positions. Each white camera below indicates the actual position from which a photograph was taken. Sculpture courtesy Wang Xian Gang

  4. 123D Catch (AutoDesk) 3D mesh of scene created from 2D photographs. Note strip of photos at base of image. Sculpture courtesy Wang Xian Gang

  5. Geomagic 123D Catch model exported as .obj to Geomagic for final polygon repair and diagnosis. Sculpture courtesy Wang Xian Gang

  6. RhinoCAM Watertight .dxf model exported from Geomagic to RhinoCAM for CNC milling. Sculpture courtesy Wang Xian Gang

  7. RhinoCAM Simulation of CNC milling (roughing stage) Sculpture courtesy Wang Xian Gang

  8. RhinoCAM Simulation of CNC milling (roughing stage complete) Sculpture courtesy Wang Xian Gang

  9. RhinoCAM Simulation of CNC milling (final smoothing stage nearly complete) Sculpture courtesy Wang Xian Gang

  10. 123D Make (AutoDesk) Method of creating sculpture from multiple layers (76 layers, each 3.175 mm thick) Sculpture courtesy Wang Xian Gang

  11. 123D Make (AutoDesk) Method of creating sculpture from multiple stacked layers (111 layers, each 1.59 mm thick) Sculpture courtesy Wang Xian Gang

  12. 123D Make (AutoDesk) Method of creating sculpture from 693 stacked layers (layers are .010 inches or .25 mm thick) Sculpture courtesy Wang Xian Gang

  13. 123D Make (AutoDesk) Method of creating sculpture from multiple intersecting planes Sculpture courtesy Wang Xian Gang

More Related