1 / 10

Data-Converter Circuits

Data-Converter Circuits. Because digital integrated circuits are economical and accurate, it is convenient to process signals in digital form, for example, to perform algebraic manipulations, to transmit or store signals.

oralee
Download Presentation

Data-Converter Circuits

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Data-Converter Circuits Because digital integrated circuits are economical and accurate, it is convenient to process signals in digital form, for example, to perform algebraic manipulations, to transmit or store signals. Figure 9.36 The process of periodically sampling an analog signal. (a) Sample-and-hold (S/H) circuit. The switch closes for a small part (t seconds) of every clock period (T). (b) Input signal waveform. (c) Sampling signal (control signal for the switch). (d) Output signal (to be fed to A/D converter).

  2. Analog-to-Digital (A/D) and Digital-to-Analog (D/A) Converters as Functional Blocks Figure 9.37 The A/D and D/A converters as circuit blocks.

  3. D/A Converter Circuits • Binary-weighted registers Figure 9.39 An N-bit D/A converter using a binary-weighted resistive ladder network.

  4. R-2R ladders Figure 9.40 The basic circuit configuration of a DAC utilizing an R-2R ladder network.

  5. Figure 9.41 A practical circuit implementation of a DAC utilizing an R-2R ladder network.

  6. Figure 9.42 Circuit implementation of switch Sm in the DAC of Fig. 9.41. In a BiCMOS technology, Qms and Qmr can be implemented using MOSFETs, thus avoiding the inaccuracy caused by the base current of BJTs.

  7. A/D Converter Circuits • Feedback-type converter Figure 9.43 A simple feedback-type A/D converter.

  8. Dual-slope converter Figure 9.44 The dual-slope A/D conversion method. Note that vA is assumed to be negative.

  9. Parallel converter Figure 9.45 Parallel, simultaneous, or flash A/D conversion.

  10. Charge-redistribution converter • Sample phase • Hold phase • Redistribution phase 01101 Figure 9.46 Charge-redistribution A/D converter suitable for CMOS implementation: (a) sample phase, (b) hold phase, and (c) charge-redistribution phase.

More Related