1 / 13

Digital processing applications for DE2 card

Digital processing applications for DE2 card. 1 semester project. High Speed Digital Systems Lab Winter 2008/09. Instructor: Mony Orbach Students : Avner Reisz, Natty Nizri. Introduction. The MSS (mixed signal system) from Alex & Rony’s project, combines analog and digital signals.

raya-waters
Download Presentation

Digital processing applications for DE2 card

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Digital processing applications for DE2 card 1 semester project High Speed Digital Systems Lab Winter 2008/09 Instructor: Mony Orbach Students : Avner Reisz, Natty Nizri

  2. Introduction The MSS (mixed signal system) from Alex & Rony’s project, combines analog and digital signals. With the help of Alterra’s DE2 analog signals can be digitally processed after being sampled by the MSS.

  3. Introduction This is the case handled:

  4. Topics • Project goal Inputs • Outputs Block diagram Rates & frequencies The applications Time table

  5. Project goal Writing the applications in VHDL for the DE2

  6. Inputs DE2 MSS 8-bit BUS (100 kHz) Function generator

  7. Outputs Scope DE2 8-bit BUS (100 kHz) MSS

  8. Block diagram MSS Function generator Scope DE2

  9. Rates & frequencies: MSS • Input: • ± 1v • BW: 20Hz – 20kHz • Output: • 2.5 ± 1.4v

  10. Rates & frequencies: DE2 • I/O: • 8 bit bus • 100kHz • Cyclone II • 50/27 MHz

  11. The Aplications: • Saturation: Cuts to the signal to a max value (of choice) whenever crossing it. 2. Time stretch: Stretches the signal in time (This is actually like freq. reduce)

  12. The Aplications: 3. DC: Applies a DC value of choise (e.g. Vrms or peak of the original signal). 4. Division: Divides the signal (letting the user choose the factor is an option..) 5. Filter. 12

  13. Time table

More Related