1 / 13

Chapter 12 Elasticity

Chapter 12 Elasticity. Units of Chapter 12. Elasticity; Stress and Strain. 12-4 Elasticity; Stress and Strain. Hooke’s law : the change in length is proportional to the applied force. 12-4 Elasticity; Stress and Strain.

rea
Download Presentation

Chapter 12 Elasticity

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Chapter 12Elasticity

  2. Units of Chapter 12 • Elasticity; Stress and Strain

  3. 12-4 Elasticity; Stress and Strain Hooke’s law: the change in length is proportional to the applied force.

  4. 12-4 Elasticity; Stress and Strain This proportionality holds until the force reaches the proportional limit. Beyond that, the object will still return to its original shape up to the elastic limit. Beyond the elastic limit, the material is permanently deformed, and it breaks at the breaking point.

  5. 12-4 Elasticity; Stress and Strain The change in length of a stretched object depends not only on the applied force, but also on its length, cross-sectional area and the material from which it is made. The material factor, E, is called the elastic modulus or Young’s modulus, and it has been measured for many materials.

  6. 12-4 Elasticity; Stress and Strain

  7. 12-4 Elasticity; Stress and Strain Example 12-7: Tension in piano wire. A 1.60-m-long steel piano wire has a diameter of 0.20 cm. How great is the tension in the wire if it stretches 0.25 cm when tightened?

  8. 12-4 Elasticity; Stress and Strain Stress is defined as the force per unit area. Strain is defined as the ratio of the change in length to the original length. Therefore, the elastic modulus is equal to the stress divided by the strain:

  9. 12-4 Elasticity; Stress and Strain In tensile stress, forces tend to stretch the object.

  10. 12-4 Elasticity; Stress and Strain Compressional stress is exactly the opposite of tensional stress. These columns are under compression.

  11. 12-4 Elasticity; Stress and Strain The three types of stress for rigid objects:

  12. 12-4 Elasticity; Stress and Strain The shear strain, where G is the shear modulus:

  13. 12-4 Elasticity; Stress and Strain If an object is subjected to inward forces on all sides, its volume changes depending on its bulk modulus. This is the only deformation that applies to fluids. or

More Related